On Thu, Nov 07, 2013 at 05:31:08AM +0100, Mike Galbraith wrote:
> On Thu, 2013-11-07 at 04:26 +0100, Mike Galbraith wrote:
> > On Wed, 2013-11-06 at 18:49 +0100, Thomas Gleixner wrote:
>
> > > I bet you are trying to work around some of the side effects of the
> > > occasional tick which is still necessary despite of full nohz, right?
> >
> > Nope, I wanted to check out cost of nohz_full for rt, and found that it
> > doesn't work at all instead, looked, and found that the sole running
> > task has just awakened ksoftirqd when it wants to shut the tick down, so
> > that shutdown never happens.
>
> Like so in virgin 3.10-rt. Box is x3550 M3 booted nowatchdog
> rcu_nocbs=1-3 nohz_full=1-3, and CPUs1-3 are completely isolated via
> cpusets as well.
Hmmm... The fact that the CPU is getting scheduling-clock interrupts
is what is causing the RCU_SOFTIRQs. If you take a scheduling-clock
interrupt on a CPU that RCU is waiting for, it will do raise_softirq()
in order to get the CPU to respond to RCU.
So the RCU_SOFTIRQs are a direct consequence of the scheduling-clock
interrupts.
An untested patch that gets rid of the RCU_SOFTIRQs in this case is below.
Not sure how to help with the scheduling-clock interrupts.
Thanx, Paul
> ...
> pert-5229 [003] d..h2.. 684.481615: hrtimer_cancel:
> hrtimer=ffff88017fccbac0
> pert-5229 [003] d..h1.. 684.481616: hrtimer_expire_entry:
> hrtimer=ffff88017fccbac0 function=tick_sched_timer now=683820187877
> pert-5229 [003] d..h2.. 684.481616: sched_stat_runtime:
> comm=pert pid=5229 runtime=993917 [ns] vruntime=179048871558 [ns]
> pert-5229 [003] d..h1.. 684.481616: softirq_raise: vec=1
> [action=TIMER]
> pert-5229 [003] d..h1.. 684.481616: hrtimer_expire_exit:
> hrtimer=ffff88017fccbac0
> pert-5229 [003] d..h2.. 684.481617: hrtimer_start:
> hrtimer=ffff88017fccbac0 function=tick_sched_timer expires=683821187500
> softexpires=683821187500
> pert-5229 [003] d...3.. 684.481618: sched_stat_runtime:
> comm=pert pid=5229 runtime=1634 [ns] vruntime=179048873192 [ns]
> pert-5229 [003] d.L.3.. 684.481618: sched_wakeup:
> comm=ksoftirqd/3 pid=49 prio=120 success=1 target_cpu=003
> pert-5229 [003] d.L.1.. 684.481618: tick_stop: success=no
> msg=more than 1 task in runqueue
>
> pert-5229 [003] d.L.1.. 684.481619: tick_stop: success=no
> msg=more than 1 task in runqueue
>
> pert-5229 [003] d.L.3.. 684.481620: sched_stat_runtime:
> comm=pert pid=5229 runtime=2096 [ns] vruntime=179048875288 [ns]
> pert-5229 [003] d...3.. 684.481620: sched_switch:
> prev_comm=pert prev_pid=5229 prev_prio=120 prev_state=R+ ==>
> next_comm=ksoftirqd/3 next_pid=49 next_prio=120
> ksoftirqd/3-49 [003] ....111 684.481621: softirq_entry: vec=1
> [action=TIMER]
> ksoftirqd/3-49 [003] ....111 684.481621: softirq_exit: vec=1
> [action=TIMER]
> ksoftirqd/3-49 [003] d...3.. 684.481622: sched_stat_runtime:
> comm=ksoftirqd/3 pid=49 runtime=1934 [ns] vruntime=179039875126 [ns]
> ksoftirqd/3-49 [003] d...3.. 684.481622: sched_switch:
> prev_comm=ksoftirqd/3 prev_pid=49 prev_prio=120 prev_state=S ==>
> next_comm=pert next_pid=5229 next_prio=120
> pert-5229 [003] d...3.. 684.481623: sched_stat_runtime:
> comm=pert pid=5229 runtime=1289 [ns] vruntime=179048876577 [ns]
> pert-5229 [003] d..h2.. 684.482616: hrtimer_cancel:
> hrtimer=ffff88017fccbac0
> pert-5229 [003] d..h1.. 684.482617: hrtimer_expire_entry:
> hrtimer=ffff88017fccbac0 function=tick_sched_timer now=683821188024
> pert-5229 [003] d..h2.. 684.482617: sched_stat_runtime:
> comm=pert pid=5229 runtime=994281 [ns] vruntime=179049870858 [ns]
> pert-5229 [003] d..h1.. 684.482617: softirq_raise: vec=1
> [action=TIMER]
> pert-5229 [003] d..h1.. 684.482618: softirq_raise: vec=9
> [action=RCU]
> pert-5229 [003] d..h1.. 684.482618: hrtimer_expire_exit:
> hrtimer=ffff88017fccbac0
> pert-5229 [003] d..h2.. 684.482618: hrtimer_start:
> hrtimer=ffff88017fccbac0 function=tick_sched_timer expires=683822187500
> softexpires=683822187500
> pert-5229 [003] d...3.. 684.482619: sched_stat_runtime:
> comm=pert pid=5229 runtime=1719 [ns] vruntime=179049872577 [ns]
> pert-5229 [003] d.L.3.. 684.482619: sched_wakeup:
> comm=ksoftirqd/3 pid=49 prio=120 success=1 target_cpu=003
> pert-5229 [003] d.L.1.. 684.482619: tick_stop: success=no
> msg=more than 1 task in runqueue
>
> pert-5229 [003] d.L.1.. 684.482620: tick_stop: success=no
> msg=more than 1 task in runqueue
>
> pert-5229 [003] d.L.3.. 684.482621: sched_stat_runtime:
> comm=pert pid=5229 runtime=2204 [ns] vruntime=179049874781 [ns]
> pert-5229 [003] d...3.. 684.482621: sched_switch:
> prev_comm=pert prev_pid=5229 prev_prio=120 prev_state=R+ ==>
> next_comm=ksoftirqd/3 next_pid=49 next_prio=120
> ksoftirqd/3-49 [003] ....111 684.482622: softirq_entry: vec=1
> [action=TIMER]
> ksoftirqd/3-49 [003] ....111 684.482623: softirq_exit: vec=1
> [action=TIMER]
> ksoftirqd/3-49 [003] ....111 684.482623: softirq_entry: vec=9
> [action=RCU]
> ksoftirqd/3-49 [003] ....111 684.482624: softirq_exit: vec=9
> [action=RCU]
> ksoftirqd/3-49 [003] d...3.. 684.482624: sched_stat_runtime:
> comm=ksoftirqd/3 pid=49 runtime=3049 [ns] vruntime=179040875626 [ns]
> ksoftirqd/3-49 [003] d...3.. 684.482624: sched_switch:
> prev_comm=ksoftirqd/3 prev_pid=49 prev_prio=120 prev_state=S ==>
> next_comm=pert next_pid=5229 next_prio=120
> pert-5229 [003] d...3.. 684.482626: sched_stat_runtime:
> comm=pert pid=5229 runtime=1422 [ns] vruntime=179049876203 [ns]
> pert-5229 [003] d..h2.. 684.483617: hrtimer_cancel:
> hrtimer=ffff88017fccbac0
> pert-5229 [003] d..h1.. 684.483617: hrtimer_expire_entry:
> hrtimer=ffff88017fccbac0 function=tick_sched_timer now=683822187923
> pert-5229 [003] d..h2.. 684.483618: sched_stat_runtime:
> comm=pert pid=5229 runtime=992021 [ns] vruntime=179050868224 [ns]
> pert-5229 [003] d..h1.. 684.483618: softirq_raise: vec=1
> [action=TIMER]
> pert-5229 [003] d..h1.. 684.483618: softirq_raise: vec=9
> [action=RCU]
> pert-5229 [003] d..h1.. 684.483618: hrtimer_expire_exit:
> hrtimer=ffff88017fccbac0
> pert-5229 [003] d..h2.. 684.483618: hrtimer_start:
> hrtimer=ffff88017fccbac0 function=tick_sched_timer expires=683823187500
> softexpires=683823187500
> pert-5229 [003] d...3.. 684.483619: sched_stat_runtime:
> comm=pert pid=5229 runtime=1778 [ns] vruntime=179050870002 [ns]
> pert-5229 [003] d.L.3.. 684.483620: sched_wakeup:
> comm=ksoftirqd/3 pid=49 prio=120 success=1 target_cpu=003
> pert-5229 [003] d.L.1.. 684.483620: tick_stop: success=no
> msg=more than 1 task in runqueue
>
> pert-5229 [003] d.L.1.. 684.483621: tick_stop: success=no
> msg=more than 1 task in runqueue
>
> pert-5229 [003] d.L.3.. 684.483621: sched_stat_runtime:
> comm=pert pid=5229 runtime=2096 [ns] vruntime=179050872098 [ns]
> pert-5229 [003] d...3.. 684.483622: sched_switch:
> prev_comm=pert prev_pid=5229 prev_prio=120 prev_state=R+ ==>
> next_comm=ksoftirqd/3 next_pid=49 next_prio=120
> ksoftirqd/3-49 [003] ....111 684.483623: softirq_entry: vec=1
> [action=TIMER]
> ksoftirqd/3-49 [003] ....111 684.483623: softirq_exit: vec=1
> [action=TIMER]
> ksoftirqd/3-49 [003] ....111 684.483623: softirq_entry: vec=9
> [action=RCU]
> ksoftirqd/3-49 [003] ....111 684.483624: softirq_exit: vec=9
> [action=RCU]
> ksoftirqd/3-49 [003] d...3.. 684.483625: sched_stat_runtime:
> comm=ksoftirqd/3 pid=49 runtime=3187 [ns] vruntime=179041873189 [ns]
> ksoftirqd/3-49 [003] d...3.. 684.483625: sched_switch:
> prev_comm=ksoftirqd/3 prev_pid=49 prev_prio=120 prev_state=S ==>
> next_comm=pert next_pid=5229 next_prio=120
> pert-5229 [003] d...3.. 684.483626: sched_stat_runtime:
> comm=pert pid=5229 runtime=1331 [ns] vruntime=179050873429 [ns]
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 32618b3fe4e6..ee4de3f6a77e 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -2658,6 +2658,10 @@ static int __rcu_pending(struct rcu_state *rsp, struct
rcu_data *rdp)
/* Check for CPU stalls, if enabled. */
check_cpu_stall(rsp, rdp);
+ /* Is this CPU a NO_HZ_FULL CPU that should ignore RCU? */
+ if (rcu_nohz_full_cpu(rsp))
+ return 0;
+
/* Is the RCU core waiting for a quiescent state from this CPU? */
if (rcu_scheduler_fully_active &&
rdp->qs_pending && !rdp->passed_quiesce) {
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 5f97eab602cd..42cdc77dc7f1 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -562,6 +562,7 @@ static void rcu_sysidle_report_gp(struct rcu_state *rsp,
int isidle,
unsigned long maxj);
static void rcu_bind_gp_kthread(void);
static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp);
+static bool rcu_nohz_full_cpu(struct rcu_state *rsp);
#endif /* #ifndef RCU_TREE_NONCORE */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 130c97b027f2..3e7087d3b9df 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -2795,3 +2795,23 @@ static void rcu_sysidle_init_percpu_data(struct
rcu_dynticks *rdtp)
}
#endif /* #else #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
+
+/*
+ * Is this CPU a NO_HZ_FULL CPU that should ignore RCU so that the
+ * grace-period kthread will do force_quiescent_state() processing?
+ * The idea is to avoid waking up RCU core processing on such a
+ * CPU unless the grace period has extended for too long.
+ *
+ * This code relies on the fact that all NO_HZ_FULL CPUs are also
+ * CONFIG_RCU_NOCB_CPUs.
+ */
+static bool rcu_nohz_full_cpu(struct rcu_state *rsp)
+{
+#ifdef CONFIG_NO_HZ_FULL
+ if (tick_nohz_full_cpu(smp_processor_id()) &&
+ (!rcu_gp_in_progress(rsp) ||
+ ULONG_CMP_LT(jiffies, ACCESS_ONCE(rsp->gp_start) + HZ)))
+ return 1;
+#endif /* #ifdef CONFIG_NO_HZ_FULL */
+ return 0;
+}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
