On 20/11/2013 15:57, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 13:04 Wed 28 Aug , Boris BREZILLON wrote:
Add vbus and pullup pinctrl definitions.
Request the vbus and pullup pins in usb1 node.
Signed-off-by: Boris BREZILLON <b.brezil...@overkiz.com>
---
arch/arm/boot/dts/at91rm9200ek.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts
b/arch/arm/boot/dts/at91rm9200ek.dts
index 37b0880..76f3e87 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -29,6 +29,18 @@
ahb {
apb {
+ pinctrl@fffff400 {
+ usb1 {
+ pinctrl_usb1_vbus: usb1_vbus-0 {
+ atmel,pins = <AT91_PIOD 4
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
it's a gpio no-need
Okay, noted.
I thought I had to declare gpio configured pins in order to detect pin
conflicts.
But after taking a closer look at the pinctrl core and at91 pinctrl
driver, it seems this is automatically done
by means of the pinctrl_request_gpio function.
+
+ pinctrl_usb1_pullup: usb1_pullup-0 {
+ atmel,pins = <AT91_PIOD 5
AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+ };
no-need multidrive
Then why is it configured with multi-drive option in the board file
(
http://lxr.free-electrons.com/source/arch/arm/mach-at91/board-rm9200ek.c#L166)
?
+ };
+ };
+
dbgu: serial@fffff200 {
status = "okay";
};
@@ -56,6 +68,9 @@
usb1: gadget@fffb0000 {
atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus
+ &pinctrl_usb1_pullup>;
status = "okay";
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
