The Keystone arch has compatible nand device, so reuse it.
In case with Keystone it depends on TI_AEMIF because AEMIF
driver is responsible to set timings.

See http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf

Signed-off-by: Ivan Khoronzhuk <ivan.khoronz...@ti.com>
---
 .../devicetree/bindings/mtd/davinci-nand.txt       |    8 +++++---
 drivers/mtd/nand/Kconfig                           |    6 +++---
 drivers/mtd/nand/davinci_nand.c                    |    1 +
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt 
b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
index befaa5b..cfb18ab 100644
--- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -1,14 +1,16 @@
-Device tree bindings for Texas instruments Davinci NAND controller
+Device tree bindings for Texas instruments Davinci/Keystone NAND controller
 
-This file provides information, what the device node for the davinci NAND
-interface contains.
+This file provides information, what the device node for the davinci/keystone
+NAND interface contains.
 
 Documentation:
 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
 
 Required properties:
 
 - compatible:                  "ti,davinci-nand"
+                               "ti,keystone-nand"
 
 - reg:                         Contains 2 offset/length values:
                                - offset and length for the access window.
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d885298..8bf69c7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -492,11 +492,11 @@ config MTD_NAND_SH_FLCTL
          for NAND Flash using FLCTL.
 
 config MTD_NAND_DAVINCI
-        tristate "Support NAND on DaVinci SoC"
-        depends on ARCH_DAVINCI
+        tristate "Support NAND on DaVinci/Keystone SoC"
+        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
         help
          Enable the driver for NAND flash chips on Texas Instruments
-         DaVinci processors.
+         DaVinci/Keystone processors.
 
 config MTD_NAND_TXX9NDFMC
        tristate "NAND Flash support for TXx9 SoC"
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index f7b21b8..8459720 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 __initconst = {
 #if defined(CONFIG_OF)
 static const struct of_device_id davinci_nand_of_match[] = {
        {.compatible = "ti,davinci-nand", },
+       {.compatible = "ti,keystone-nand", },
        {},
 };
 MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to