Hello.
On 04-12-2013 16:10, oli...@schinagl.nl wrote:
From: Oliver Schinagl <oli...@schinagl.nl>
The Allwinner sunxi platforms have patched in the following to enable
DMA. This patch enables DMA controllers for the SUNXI Architecture.
Signed-off-by: Olliver Schinagl <oli...@schinagl.nl>
---
drivers/ata/ahci.h | 6 ++++++
drivers/ata/libahci.c | 8 ++++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 2289efdf..2bf2423 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
[...]
@@ -209,6 +210,11 @@ enum {
PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */
PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */
+ /* PORT_DMA bits */
+ PORT_DMA_SETUP_OFFSET = 8, /* dma setup offset */
+ PORT_DMA_SETUP_MASK = (0xff << PORT_DMA_SETUP_OFFSET),/* dma mask */
+ PORT_DMA_SETUP_INIT = (0x44 << 0),
Why not shift it right by PORT_DMA_SETUP_OFFSET if you do it in the next
file anyway?
[...]
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index c482f8c..d697a74 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -570,6 +570,14 @@ void ahci_start_engine(struct ata_port *ap)
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
+#ifdef CONFIG_ARCH_SUNXI
+ /* Setup DMA before DMA start */
+ tmp = readl(port_mmio + PORT_DMA);
+ tmp &= ~PORT_DMA_SETUP_MASK;
+ tmp |= PORT_DMA_SETUP_INIT << PORT_DMA_SETUP_OFFSET;
+ writel(tmp, port_mmio + PORT_DMA);
+#endif
+
I don't think #ifdef is appropriate here.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
