Hi Oliver, On Wed, Dec 04, 2013 at 01:10:55PM +0100, oli...@schinagl.nl wrote: > From: Oliver Schinagl <oli...@schinagl.nl> > > This patch adds sunxi sata support to A10 and A20 boards that have such > a connector. Some boards also feature a regulator via a GPIO and support > for this is also added. > > Signed-off-by: Olliver Schinagl <oli...@schinagl.nl>
Your git setup seems to be pretty uncertain about how your first name is
spelled :)
> ---
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 26
> +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 26
> +++++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 26
> +++++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 26
> +++++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
> 6 files changed, 122 insertions(+)
Could you split this into several patches please?
At least one per SoC.
> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index 425a7db..b620084 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -42,7 +42,18 @@
> };
> };
>
> + sata: ahci@01c18000 {
> + pwr-supply = <®_ahci_5v>;
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> + ahci_pwr_pin: ahci_pwr_pin@0 {
Please prefix it with name of the board.
> + allwinner,pins = "PB8";
> + allwinner,function = "gpio_out";
> + allwinner,driver = <0>;
> + allwinner,pull = <0>;
> + };
Please add a newline here.
> led_pins_cubieboard: led_pins@0 {
> allwinner,pins = "PH20", "PH21";
> allwinner,function = "gpio_out";
> @@ -86,4 +97,19 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + regulators {
> + compatible = "simple-bus";
> + pinctrl-names = "default";
> +
> + reg_ahci_5v: ahci-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "ahci-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-0 = <&ahci_pwr_pin>;
> + gpio = <&pio 1 8 0>;
> + enable-active-high;
> + };
> + };
> };
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi
> b/arch/arm/boot/dts/sun4i-a10.dtsi
> index 4dccdb0..53c6cdb 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -306,6 +306,15 @@
> #size-cells = <0>;
> };
>
> + sata: ahci@01c18000 {
> + compatible = "allwinner,sun4i-a10-ahci";
Please use sun4i-ahci for consistency.
> + reg = <0x01c18000 0x1000>;
> + interrupts = <0 56 1>;
The interrupt here doesn't seem right. Is it actually working at all?
> + clocks = <&ahb_gates 25>, <&pll6 0>;
> + clock-names = "ahb_sata", "pll6_sata";
> + status = "disabled";
> + };
> +
> intc: interrupt-controller@01c20400 {
> compatible = "allwinner,sun4i-ic";
> reg = <0x01c20400 0x400>;
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> index 5c51cb8..99c5e78 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> @@ -34,7 +34,18 @@
> };
> };
>
> + sata: ahci@01c18000 {
> + pwr-supply = <®_ahci_5v>;
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> + ahci_pwr_pin: ahci_pwr_pin@0 {
> + allwinner,pins = "PB8";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <0>;
> + allwinner,pull = <0>;
> + };
Please add a newline here.
> led_pins_cubieboard2: led_pins@0 {
> allwinner,pins = "PH20", "PH21";
> allwinner,function = "gpio_out";
> @@ -77,4 +88,19 @@
> gpios = <&pio 7 20 0>;
> };
> };
> +
> + regulators {
> + compatible = "simple-bus";
> + pinctrl-names = "default";
> +
> + reg_ahci_5v: ahci-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "ahci-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-0 = <&ahci_pwr_pin>;
> + gpio = <&pio 1 8 0>;
> + enable-active-high;
> + };
> + };
> };
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> index 8a1009d..19af23e 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> @@ -19,7 +19,18 @@
> compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
>
> soc@01c00000 {
> + sata: ahci@01c18000 {
> + pwr-supply = <®_ahci_5v>;
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> + ahci_pwr_pin: ahci_pwr_pin@0 {
> + allwinner,pins = "PH12";
> + allwinner,function = "gpio_out";
> + allwinner,driver = <0>;
> + allwinner,pull = <0>;
> + };
Please add a newline here.
> led_pins_cubietruck: led_pins@0 {
> allwinner,pins = "PH7", "PH11", "PH20", "PH21";
> allwinner,function = "gpio_out";
> @@ -60,4 +71,19 @@
> gpios = <&pio 7 7 0>;
> };
> };
> +
> + regulators {
> + compatible = "simple-bus";
> + pinctrl-names = "default";
> +
> + reg_ahci_5v: ahci-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "ahci-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-0 = <&ahci_pwr_pin>;
> + gpio = <&pio 7 12 0>;
> + enable-active-high;
> + };
> + };
> };
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> index ead3013..23ed708 100644
> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> @@ -34,7 +34,19 @@
> };
> };
>
> + sata: ahci@01c18000 {
> + pwr-supply = <®_ahci_5v>;
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> + ahci_pwr_pin: ahci_pwr_pin@0 {
> + allwinner,pins = "PB8";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <0>;
> + allwinner,pull = <0>;
> + };
> +
> led_pins_olinuxino: led_pins@0 {
> allwinner,pins = "PH2";
> allwinner,function = "gpio_out";
> @@ -91,4 +103,18 @@
> default-state = "on";
> };
> };
> +
> + regulators {
> + compatible = "simple-bus";
> +
> + reg_ahci_5v: ahci-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "ahci-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-0 = <&ahci_pwr_pin>;
> + gpio = <&pio 1 8 0>;
> + enable-active-high;
> + };
> + };
> };
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi
> b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 0552a64..b72c69e 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -368,6 +368,15 @@
> };
> };
>
> + sata: ahci@01c18000 {
> + compatible = "allwinner,sun4i-a10-ahci";
> + reg = <0x01c18000 0x1000>;
> + interrupts = <0 56 1>;
> + clocks = <&ahb_gates 25>, <&pll6 0>;
> + clock-names = "ahb_sata", "pll6_sata";
> + status = "disabled";
> + };
> +
> timer@01c20c00 {
> compatible = "allwinner,sun4i-timer";
> reg = <0x01c20c00 0x90>;
> --
> 1.8.3.2
>
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
signature.asc
Description: Digital signature
