This patch splits individual sysreg functions into separate MFD cells, which then become individual platform devices with their own drivers.
Signed-off-by: Pawel Moll <[email protected]> --- .../devicetree/bindings/arm/vexpress-sysreg.txt | 37 ++- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 76 ++++++- arch/arm/boot/dts/vexpress-v2m.dtsi | 76 ++++++- arch/arm/mach-vexpress/v2m.c | 23 +- drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 2 +- drivers/mfd/vexpress-sysreg.c | 247 +++++++++++++++------ include/linux/vexpress.h | 16 +- 8 files changed, 377 insertions(+), 111 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 5580e9c..8caefec6 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -8,6 +8,8 @@ interrupt generation, MMC and NOR Flash control etc. Required node properties: - compatible value : = "arm,vexpress,sysreg"; - reg : physical base address and the size of the registers window + +Deprecated properties, replaced by GPIO subnodes (see below): - gpio-controller : specifies that the node is a GPIO controller - #gpio-cells : size of the GPIO specifier, should be 2: - first cell is the pseudo-GPIO line number: @@ -16,12 +18,42 @@ Required node properties: 2 - NOR FLASH WPn - second cell can take standard GPIO flags (currently ignored). +Control registers providing pseudo-GPIO lines must be represented +by subnodes, each of them requiring the following properties: +- compatible value : one of + "arm,vexpress-sysreg,sys_led" + "arm,vexpress-sysreg,sys_mci" + "arm,vexpress-sysreg,sys_flash" +- gpio-controller : makes the node a GPIO controller +- #gpio-cells : size of the GPIO specifier, must be 2: + - first cell is the function number: + - for sys_led : 0..7 = LED 0..7 + - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT + - for sys_flash : 0 = NOR FLASH WPn + - second cell can take standard GPIO flags (currently ignored). + Example: v2m_sysreg: sysreg@10000000 { compatible = "arm,vexpress-sysreg"; reg = <0x10000000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; This block also can also act a bridge to the platform's configuration @@ -41,6 +73,7 @@ property: Example: mcc { + compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; osc@0 { diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb..756c986 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -74,8 +74,24 @@ v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@020000 { @@ -113,8 +129,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -265,6 +281,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f142036..ba856d6 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -73,8 +73,24 @@ v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@01000 { @@ -112,8 +128,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -264,6 +280,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 325ae06..c39b14a 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = { static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, - .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, + .status = vexpress_get_mci_cardin, + .gpio_cd = -1, + .gpio_wp = -1, }; static struct resource v2m_sysreg_resources[] = { @@ -394,23 +395,6 @@ void __init v2m_dt_map_io(void) iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); } -void __init v2m_dt_init_early(void) -{ - u32 dt_hbi; - - vexpress_sysreg_of_early_init(); - - /* Confirm board type against DT property, if available */ - if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { - u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); - - if (WARN_ON(dt_hbi != hbi)) - pr_warning("vexpress: DT HBI (%x) is not matching " - "hardware (%x)!\n", dt_hbi, hbi); - } -} - - static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); @@ -427,6 +411,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .smp = smp_ops(vexpress_smp_dt_ops), .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, - .init_early = v2m_dt_init_early, .init_machine = v2m_dt_init, MACHINE_END diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4c8cdc3..a4effd4 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1200,3 +1200,14 @@ config MCP_UCB1200_TS endmenu +config MFD_VEXPRESS_SYSREG + bool "Versatile Express System Registers" + depends on VEXPRESS_CONFIG + default y + select CLKSRC_MMIO + select GPIO_GENERIC_PLATFORM + select MFD_CORE + select MFD_SYSCON + help + System Registers are the platform configuration block + on the ARM Ltd. Versatile Express board. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0277aa8..b6c9c32 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -159,7 +159,7 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o obj-$(CONFIG_MFD_SYSCON) += syscon.o obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o -obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-sysreg.o +obj-$(CONFIG_MFD_VEXPRESS_SYSREG) += vexpress-sysreg.o obj-$(CONFIG_MFD_RETU) += retu-mfd.o obj-$(CONFIG_MFD_AS3711) += as3711.o obj-$(CONFIG_MFD_AS3722) += as3722.o diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 31b3290..2258344 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -8,26 +8,24 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Copyright (C) 2012 ARM Limited + * Copyright (C) 2013 ARM Limited */ +#include <linux/basic_mmio_gpio.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/io.h> -#include <linux/leds.h> +#include <linux/mfd/core.h> #include <linux/of_address.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/regulator/driver.h> #include <linux/slab.h> #include <linux/stat.h> -#include <linux/timer.h> #include <linux/vexpress.h> #define SYS_ID 0x000 #define SYS_SW 0x004 #define SYS_LED 0x008 #define SYS_100HZ 0x024 -#define SYS_FLAGS 0x030 #define SYS_FLAGSSET 0x030 #define SYS_FLAGSCLR 0x034 #define SYS_NVFLAGS 0x038 @@ -45,65 +43,34 @@ #define SYS_CFGCTRL 0x0a4 #define SYS_CFGSTAT 0x0a8 -#define SYS_HBI_MASK 0xfff -#define SYS_ID_HBI_SHIFT 16 -#define SYS_PROCIDx_HBI_SHIFT 0 - -#define SYS_LED_LED(n) (1 << (n)) - -#define SYS_MCI_CARDIN (1 << 0) -#define SYS_MCI_WPROT (1 << 1) - -#define SYS_FLASH_WPn (1 << 0) - #define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_CFGCTRL_START (1 << 31) -#define SYS_CFGCTRL_WRITE (1 << 30) -#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) -#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) -#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) -#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) -#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) -#define SYS_CFGSTAT_ERR (1 << 1) -#define SYS_CFGSTAT_COMPLETE (1 << 0) +static int vexpress_sysreg_get_master(void __iomem *base) +{ + if (readl(base + SYS_MISC) & SYS_MISC_MASTERSITE) + return VEXPRESS_SITE_DB2; + return VEXPRESS_SITE_DB1; +} -static void __iomem *vexpress_sysreg_base; +/* Non-DT case platform functions, to be gone... */ -void vexpress_flags_set(u32 data) -{ - writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR); - writel(data, vexpress_sysreg_base + SYS_FLAGSSET); -} +static void __iomem *vexpress_sysreg_base; u32 vexpress_get_procid(int site) { if (site == VEXPRESS_SITE_MASTER) - site = vexpress_config_get_master(); + site = vexpress_sysreg_get_master(vexpress_sysreg_base); return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ? SYS_PROCID0 : SYS_PROCID1)); } -u32 vexpress_get_hbi(int site) +unsigned int vexpress_get_mci_cardin(struct device *dev) { - u32 id; - - switch (site) { - case VEXPRESS_SITE_MB: - id = readl(vexpress_sysreg_base + SYS_ID); - return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK; - case VEXPRESS_SITE_MASTER: - case VEXPRESS_SITE_DB1: - case VEXPRESS_SITE_DB2: - id = vexpress_get_procid(site); - return (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; - } - - return ~0; + return readl(vexpress_sysreg_base + SYS_MCI) & 1; } void __iomem *vexpress_get_24mhz_clock_base(void) @@ -111,34 +78,184 @@ void __iomem *vexpress_get_24mhz_clock_base(void) return vexpress_sysreg_base + SYS_24MHZ; } - -void vexpress_sysreg_setup(struct device_node *node) +void __init vexpress_sysreg_early_init(void __iomem *base) { - if (WARN_ON(!vexpress_sysreg_base)) + if (WARN_ON(!base)) return; - if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) - vexpress_config_set_master(VEXPRESS_SITE_DB2); + vexpress_sysreg_base = base; + + vexpress_config_set_master(vexpress_sysreg_get_master(base)); +} + + +/* Versatile SMP boot protocol helper */ + +void vexpress_flags_set(u32 data) +{ + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + void __iomem *base; + + if (node) + base = of_iomap(node, 0); else - vexpress_config_set_master(VEXPRESS_SITE_DB1); + base = vexpress_sysreg_base; + + if (WARN_ON(!base)) + return; + + writel(~0, base + SYS_FLAGSCLR); + writel(data, base + SYS_FLAGSSET); + + if (node) + iounmap(base); } -void __init vexpress_sysreg_early_init(void __iomem *base) + +/* The sysreg block is just a random collection of various functions... */ + +static const char vexpress_sysreg_sys_id_pdata[] = "sys_id"; + +static struct bgpio_pdata vexpress_sysreg_sys_led_pdata = { + .label = "sys_led", + .base = -1, + .ngpio = 8, +}; + +static struct bgpio_pdata vexpress_sysreg_sys_mci_pdata = { + .label = "sys_mci", + .base = -1, + .ngpio = 2, +}; + +static struct bgpio_pdata vexpress_sysreg_sys_flash_pdata = { + .label = "sys_flash", + .base = -1, + .ngpio = 1, +}; + +static const char vexpress_sysreg_sys_misc_pdata[] = "sys_misc"; + +static const char vexpress_sysreg_sys_procid_pdata[] = "sys_procid"; + +static struct mfd_cell vexpress_sysreg_cells[] = { + { + .name = "syscon", + .of_compatible = "arm,vexpress-sysreg,sys_id", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_ID, 0x4), + }, + .platform_data = &vexpress_sysreg_sys_id_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_id_pdata), + }, { + .name = "basic-mmio-gpio", + .of_compatible = "arm,vexpress-sysreg,sys_led", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM_NAMED(SYS_LED, 0x4, "dat"), + }, + .platform_data = &vexpress_sysreg_sys_led_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_led_pdata), + }, { + .name = "basic-mmio-gpio", + .of_compatible = "arm,vexpress-sysreg,sys_mci", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM_NAMED(SYS_MCI, 0x4, "dat"), + }, + .platform_data = &vexpress_sysreg_sys_mci_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_mci_pdata), + }, { + .name = "basic-mmio-gpio", + .of_compatible = "arm,vexpress-sysreg,sys_flash", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM_NAMED(SYS_FLASH, 0x4, "dat"), + }, + .platform_data = &vexpress_sysreg_sys_flash_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_flash_pdata), + }, { + .name = "syscon", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_MISC, 0x4), + }, + .platform_data = &vexpress_sysreg_sys_misc_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_misc_pdata), + }, { + .name = "syscon", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_PROCID0, 0x8), + }, + .platform_data = &vexpress_sysreg_sys_procid_pdata, + .pdata_size = sizeof(vexpress_sysreg_sys_procid_pdata), + }, { + .name = "vexpress-syscfg", + .num_resources = 1, + .resources = (struct resource []) { + DEFINE_RES_MEM(SYS_CFGDATA, 0xc), + }, + } +}; + +static int vexpress_sysreg_probe(struct platform_device *pdev) { - vexpress_sysreg_base = base; - vexpress_sysreg_setup(NULL); + struct resource *mem; + void __iomem *base; + struct bgpio_chip *mmc_gpio_chip; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; + + base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem)); + if (!base) + return -ENOMEM; + + vexpress_config_set_master(vexpress_sysreg_get_master(base)); + + /* + * Duplicated SYS_MCI pseudo-GPIO controller for compatibility with + * older trees using sysreg node for MMC control lines. + */ + mmc_gpio_chip = devm_kzalloc(&pdev->dev, sizeof(*mmc_gpio_chip), + GFP_KERNEL); + if (!mmc_gpio_chip) + return -ENOMEM; + bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI, NULL, + NULL, NULL, NULL, 0); + mmc_gpio_chip->gc.ngpio = 2; + gpiochip_add(&mmc_gpio_chip->gc); + + return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, + vexpress_sysreg_cells, + ARRAY_SIZE(vexpress_sysreg_cells), mem, 0, 0); } -void __init vexpress_sysreg_of_early_init(void) +static const struct of_device_id vexpress_sysreg_match[] = { + { .compatible = "arm,vexpress-sysreg", }, + {}, +}; + +static struct platform_driver vexpress_sysreg_driver = { + .driver = { + .name = "vexpress-sysreg", + .of_match_table = vexpress_sysreg_match, + }, + .probe = vexpress_sysreg_probe, +}; + +static int __init vexpress_sysreg_init(void) { struct device_node *node; - if (vexpress_sysreg_base) - return; + /* Need the sysreg early, before any other device... */ + for_each_matching_node(node, vexpress_sysreg_match) + of_platform_device_create(node, NULL, NULL); - node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); - if (node) { - vexpress_sysreg_base = of_iomap(node, 0); - vexpress_sysreg_setup(node); - } + return platform_driver_register(&vexpress_sysreg_driver); } +core_initcall(vexpress_sysreg_init); diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 203f63a..72dd902 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -23,18 +23,6 @@ #define VEXPRESS_SITE_DB2 2 #define VEXPRESS_SITE_MASTER 0xf -#define VEXPRESS_GPIO_MMC_CARDIN 0 -#define VEXPRESS_GPIO_MMC_WPROT 1 -#define VEXPRESS_GPIO_FLASH_WPn 2 -#define VEXPRESS_GPIO_LED0 3 -#define VEXPRESS_GPIO_LED1 4 -#define VEXPRESS_GPIO_LED2 5 -#define VEXPRESS_GPIO_LED3 6 -#define VEXPRESS_GPIO_LED4 7 -#define VEXPRESS_GPIO_LED5 8 -#define VEXPRESS_GPIO_LED6 9 -#define VEXPRESS_GPIO_LED7 10 - /* Config infrastructure */ void vexpress_config_set_master(u32 site); @@ -55,12 +43,10 @@ struct regmap *devm_vexpress_syscfg_regmap_init(struct device *dev, u32 site, u32 position, u32 dcc, u32 function, u32 device); u32 vexpress_get_procid(int site); -u32 vexpress_get_hbi(int site); +unsigned int vexpress_get_mci_cardin(struct device *dev); void *vexpress_get_24mhz_clock_base(void); void vexpress_flags_set(u32 data); - void vexpress_sysreg_early_init(void __iomem *base); -void vexpress_sysreg_of_early_init(void); /* Clocks */ -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
