On Sat, Dec 28, 2013 at 11:02:35AM +0800, Axel Lin wrote: > BBCH_BBCHEN_MASK is equivalent to TPS65910_SUPPLY_STATE_ENABLED. > So all regulators have the same enable_mask setting. >
Thanks for spotting this. You could also remove BBCH_BBCHEN_* from include/linux/mfd/tps65910.h. Regards, Markus > Signed-off-by: Axel Lin <axel....@ingics.com> > --- > drivers/regulator/tps65910-regulator.c | 16 +--------------- > 1 file changed, 1 insertion(+), 15 deletions(-) > > diff --git a/drivers/regulator/tps65910-regulator.c > b/drivers/regulator/tps65910-regulator.c > index 979ea0a..f50dd84 100644 > --- a/drivers/regulator/tps65910-regulator.c > +++ b/drivers/regulator/tps65910-regulator.c > @@ -1207,21 +1207,7 @@ static int tps65910_probe(struct platform_device *pdev) > pmic->desc[i].type = REGULATOR_VOLTAGE; > pmic->desc[i].owner = THIS_MODULE; > pmic->desc[i].enable_reg = pmic->get_ctrl_reg(i); > - > - switch (i) { > - case TPS65910_REG_VBB: > - if (tps65910_chip_id(tps65910) == TPS65910) > - pmic->desc[i].enable_mask = BBCH_BBCHEN_MASK; > - else > - pmic->desc[i].enable_mask = > - TPS65910_SUPPLY_STATE_ENABLED; > - break; > - > - default: > - pmic->desc[i].enable_mask = > - TPS65910_SUPPLY_STATE_ENABLED; > - break; > - } > + pmic->desc[i].enable_mask = TPS65910_SUPPLY_STATE_ENABLED; > > config.dev = tps65910->dev; > config.init_data = reg_data; > -- > 1.8.1.2 > > > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/