On Sat, 11 Jan 2014 18:36:48 +0000 Russell King - ARM Linux <li...@arm.linux.org.uk> wrote:
> On Thu, Jan 09, 2014 at 12:06:07PM +0100, Jean-Francois Moine wrote: > > According to the comment, the TBG_CNTRL_0 register must be set at the > > end of the mode change sequence. > > So you believe comments without understanding the history, and you move > code around due to those. > > No, this is again wrong. That write to REG_TBG_CNTRL_0 in the sequence > writing the video information to the chip. This doesn't encompass the > HDMI/DVI mode setting nor the audio configuration - the audio configuration > can change independently of the video setting, and does not require this > register to be written. > > This also brings up a bug in one of your previous patches which I now > must go back and comment upon. Well, I have not the full spec of the TDA998x's, and I don't know what is important or not. I was hoping that Rob had a better knowledge than I. So, in my patch 9, I was writing the REG_TBG_CNTRL_1 after writing REG_TBG_CNTRL_0, and you refused it. Here, I write REG_TBG_CNTRL_0 after the write of REG_TBG_CNTRL_1 in the HDMI sequence, and you still don't agree. What is the right way? -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
