From: Xie XiuQi <xiexi...@huawei.com>
Use USEC_PER_SEC instead of 1000000, that making the later bugfix
more clearly.
Signed-off-by: Xie XiuQi <xiexi...@huawei.com>
Signed-off-by: Corey Minyard <cminy...@mvista.com>
---
drivers/char/ipmi/ipmi_bt_sm.c | 8 ++++----
drivers/char/ipmi/ipmi_kcs_sm.c | 4 ++--
drivers/char/ipmi/ipmi_smic_sm.c | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index a22a7a5..f5e4cd7 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -201,7 +201,7 @@ static unsigned int bt_init_data(struct si_sm_data *bt,
struct si_sm_io *io)
}
bt->state = BT_STATE_IDLE; /* start here */
bt->complete = BT_STATE_IDLE; /* end here */
- bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * 1000000;
+ bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * USEC_PER_SEC;
bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT;
/* BT_CAP_outreqs == zero is a flag to read BT Capabilities */
return 3; /* We claim 3 bytes of space; ought to check SPMI table */
@@ -613,7 +613,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt,
long time)
HOST2BMC(42); /* Sequence number */
HOST2BMC(3); /* Cmd == Soft reset */
BT_CONTROL(BT_H2B_ATN);
- bt->timeout = BT_RESET_DELAY * 1000000;
+ bt->timeout = BT_RESET_DELAY * USEC_PER_SEC;
BT_STATE_CHANGE(BT_STATE_RESET3,
SI_SM_CALL_WITH_DELAY);
@@ -651,14 +651,14 @@ static enum si_sm_result bt_event(struct si_sm_data *bt,
long time)
bt_init_data(bt, bt->io);
if ((i == 8) && !BT_CAP[2]) {
bt->BT_CAP_outreqs = BT_CAP[3];
- bt->BT_CAP_req2rsp = BT_CAP[6] * 1000000;
+ bt->BT_CAP_req2rsp = BT_CAP[6] * USEC_PER_SEC;
bt->BT_CAP_retries = BT_CAP[7];
} else
printk(KERN_WARNING "IPMI BT: using default values\n");
if (!bt->BT_CAP_outreqs)
bt->BT_CAP_outreqs = 1;
printk(KERN_WARNING "IPMI BT: req2rsp=%ld secs retries=%d\n",
- bt->BT_CAP_req2rsp / 1000000L, bt->BT_CAP_retries);
+ bt->BT_CAP_req2rsp / USEC_PER_SEC, bt->BT_CAP_retries);
bt->timeout = bt->BT_CAP_req2rsp;
return SI_SM_CALL_WITHOUT_DELAY;
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index e53fc24..6a4bdc1 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -118,8 +118,8 @@ enum kcs_states {
#define MAX_KCS_WRITE_SIZE IPMI_MAX_MSG_LENGTH
/* Timeouts in microseconds. */
-#define IBF_RETRY_TIMEOUT 5000000
-#define OBF_RETRY_TIMEOUT 5000000
+#define IBF_RETRY_TIMEOUT (5*USEC_PER_SEC)
+#define OBF_RETRY_TIMEOUT (5*USEC_PER_SEC)
#define MAX_ERROR_RETRIES 10
#define ERROR0_OBF_WAIT_JIFFIES (2*HZ)
diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c
index faed929..c8e77af 100644
--- a/drivers/char/ipmi/ipmi_smic_sm.c
+++ b/drivers/char/ipmi/ipmi_smic_sm.c
@@ -80,7 +80,7 @@ enum smic_states {
#define SMIC_MAX_ERROR_RETRIES 3
/* Timeouts in microseconds. */
-#define SMIC_RETRY_TIMEOUT 2000000
+#define SMIC_RETRY_TIMEOUT (2*USEC_PER_SEC)
/* SMIC Flags Register Bits */
#define SMIC_RX_DATA_READY 0x80
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
