3.13-stable review patch. If anyone has any objections, please let me know.
------------------ From: Mark Deneen <[email protected]> commit bb7e73c598fb226c75f7625088a8f6a45a0fc892 upstream. When using RX DMA, the driver won't pass any data to the uart layer until the buffer is flipped. When the port is shutdown, the dma buffers are unmapped, but the head and tail of the ring buffer are not reseted. Since the serial console will keep the port open, this will only present itself when the uart is not shared. To reproduce the issue, with an unpatched driver, run a getty on /dev/ttyS0 with no serial console and exit. Getty will exit, and when the new one returns you will be unable to log in. If you hold down a key long enough to fill the DMA buffer and flip it, you can then log in. Signed-off-by: Mark Deneen <[email protected]> Acked-by: Leilei Zhao <[email protected]> [[email protected]: adapt to mainline kernel, handle !DMA case] Signed-off-by: Nicolas Ferre <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/tty/serial/atmel_serial.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1677,6 +1677,12 @@ static void atmel_shutdown(struct uart_p atmel_port->release_tx(port); /* + * Reset ring buffer pointers + */ + atmel_port->rx_ring.head = 0; + atmel_port->rx_ring.tail = 0; + + /* * Free the interrupt */ free_irq(port->irq, port); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
