The HAVE_PWM symbol is only for legacy platforms that provide
the PWM API without using the generic framework. PXA platforms
use the generic PWM framework, after the commit "17b2b47 pwm:
Move PXA PWM driver to PWM framework".
In the case of "CONFIG_HAVE_PWM=y && CONFIG_PWM=n", PXA platforms
make the build errors as below. Thus, selecting HAVE_PWM should
be removed from PXA platforms.
drivers/built-in.o: In function `lm3630a_pwm_ctrl':
drivers/video/backlight/lm3630a_bl.c:168: undefined reference to `pwm_config'
drivers/video/backlight/lm3630a_bl.c:172: undefined reference to `pwm_disable'
drivers/video/backlight/lm3630a_bl.c:170: undefined reference to `pwm_enable'
drivers/built-in.o: In function `lp855x_pwm_ctrl':
drivers/video/backlight/lp855x_bl.c:249: undefined reference to `pwm_config'
drivers/video/backlight/lp855x_bl.c:253: undefined reference to `pwm_disable'
drivers/video/backlight/lp855x_bl.c:251: undefined reference to `pwm_enable'
Acked-by: Linus Walleij <linus.wall...@linaro.org>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Thierry Reding <thierry.red...@gmail.com>
Signed-off-by: Jingoo Han <jg1....@samsung.com>
---
arch/arm/mach-pxa/Kconfig | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96100db..b96244c 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -7,7 +7,6 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware
release time)"
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
- select HAVE_PWM
select POWER_SUPPLY
select PXA3xx
select USE_OF
@@ -23,12 +22,10 @@ config ARCH_LUBBOCK
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
- select HAVE_PWM
select PXA27x
config MACH_ZYLONITE
bool
- select HAVE_PWM
select PXA3xx
config MACH_ZYLONITE300
@@ -69,7 +66,6 @@ config ARCH_PXA_IDP
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select ARCOM_PCMCIA
- select HAVE_PWM
select I2C_GPIO
select ISA
select PXA25x
@@ -120,7 +116,6 @@ config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select CPU_PXA300
select CPU_PXA310
- select HAVE_PWM
select PXA3xx
config MACH_CAPC7117
@@ -211,7 +206,6 @@ config TRIZEPS_PCMCIA
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
- select HAVE_PWM
select PXA27x
config MACH_PCM027
@@ -222,7 +216,6 @@ config MACH_PCM027
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
depends on MACH_PCM027
- select HAVE_PWM
choice
prompt "display on pcm990"
@@ -246,7 +239,6 @@ config MACH_COLIBRI
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
- select HAVE_PWM
select PXA27x
config MACH_COLIBRI300
@@ -275,7 +267,6 @@ comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
- select HAVE_PWM
select IWMMXT
select PXA27x
@@ -289,14 +280,12 @@ config MACH_HIMALAYA
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- select HAVE_PWM
select IWMMXT
select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select GPIO_SYSFS
- select HAVE_PWM
select IWMMXT
select PXA27x
help
@@ -306,7 +295,6 @@ config MACH_MIOA701
config PXA_EZX
bool "Motorola EZX Platform"
- select HAVE_PWM
select IWMMXT
select PXA27x
@@ -346,7 +334,6 @@ config MACH_MP900C
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
- select HAVE_PWM
config MACH_PALM27X
bool
@@ -444,7 +431,6 @@ config MACH_TREO680
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
select CPU_PXA300
- select HAVE_PWM
select POWER_SUPPLY
select PXA3xx
@@ -608,7 +594,6 @@ config MACH_E800
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
- select HAVE_PWM
select PXA27x
endmenu
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
