Vojtech Pavlik <[EMAIL PROTECTED]> writes:
> On Thu, Feb 03, 2005 at 10:54:51PM +0100, Peter Osterlund wrote:
>
> > * Removes the xres/yres scaling so that you get the same speed in the
> > X and Y directions even if your screen is not square.
>
> The old code assumed that both the pad and the screen are 4:3, not
> square. It was wrong still.
alps.c currently contains:
psmouse->dev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
input_set_abs_params(&psmouse->dev, ABS_X, 0, 1023, 0, 0);
input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1023, 0, 0);
input_set_abs_params(&psmouse->dev, ABS_PRESSURE, 0, 127, 0, 0);
Maybe it should set the ABS_Y max value to 767 in that case.
--- linux/drivers/input/mouse/alps.c~ 2005-01-12 22:02:19.000000000 +0100
+++ linux/drivers/input/mouse/alps.c 2005-02-04 07:38:12.203436768 +0100
@@ -394,7 +394,7 @@
psmouse->dev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
input_set_abs_params(&psmouse->dev, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1023, 0, 0);
+ input_set_abs_params(&psmouse->dev, ABS_Y, 0, 767, 0, 0);
input_set_abs_params(&psmouse->dev, ABS_PRESSURE, 0, 127, 0, 0);
psmouse->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
--
Peter Osterlund - [EMAIL PROTECTED]
http://web.telia.com/~u89404340
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
