On Mon, Feb 17, 2014 at 11:02:41AM +0100, David Lanzendörfer wrote: > Signed-off-by: David Lanzendörfer <david.lanzendoer...@o2s.ch> > Signed-off-by: Hans de Goede <hdego...@redhat.com> > --- > arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++ > arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++ > arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++ > arch/arm/boot/dts/sun7i-a20.dtsi | 61 > +++++++++++++++++++++++ > 4 files changed, 100 insertions(+) >
I'd prefer to have three patches here:
- One that add the controllers
- One that add the pin muxing options
- One that enable the controllers on the various boards.
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> index 5c51cb8..ae800b6 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> @@ -34,6 +34,14 @@
> };
> };
>
> + mmc0: mmc@01c0f000 {
> + pinctrl-names = "default", "default";
> + pinctrl-0 = <&mmc0_pins_a>;
> + pinctrl-1 = <&mmc0_cd_pin_reference_design>;
This can be made a single pinctrl group, you don't need the pinctrl-1
stuff, it only complicates the node.
> + cd-gpios = <&pio 7 1 0>; /* PH1 */
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> led_pins_cubieboard2: led_pins@0 {
> allwinner,pins = "PH20", "PH21";
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> index f9dcb61..370cef84 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> @@ -19,6 +19,14 @@
> compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
>
> soc@01c00000 {
> + mmc0: mmc@01c0f000 {
> + pinctrl-names = "default", "default";
> + pinctrl-0 = <&mmc0_pins_a>;
> + pinctrl-1 = <&mmc0_cd_pin_reference_design>;
> + cd-gpios = <&pio 7 1 0>; /* PH1 */
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> led_pins_cubietruck: led_pins@0 {
> allwinner,pins = "PH7", "PH11", "PH20", "PH21";
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> index ead3013..685ec06 100644
> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> @@ -34,7 +34,30 @@
> };
> };
>
> + mmc0: mmc@01c0f000 {
> + pinctrl-names = "default", "default";
> + pinctrl-0 = <&mmc0_pins_a>;
> + pinctrl-1 = <&mmc0_cd_pin_reference_design>;
> + cd-gpios = <&pio 7 1 0>; /* PH1 */
> + status = "okay";
> + };
> +
> + mmc3: mmc@01c12000 {
> + pinctrl-names = "default", "default";
> + pinctrl-0 = <&mmc3_pins_a>;
> + pinctrl-1 = <&mmc3_cd_pin_olinuxinom>;
> + cd-gpios = <&pio 7 11 0>; /* PH11 */
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
> + allwinner,pins = "PH11";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <0>;
> + allwinner,pull = <1>;
> + };
> +
> led_pins_olinuxino: led_pins@0 {
> allwinner,pins = "PH2";
> allwinner,function = "gpio_out";
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi
> b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 9ff0948..5b55414 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -355,6 +355,46 @@
> #size-cells = <0>;
> };
>
> + mmc0: mmc@01c0f000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ahb_gates 8>, <&mmc0_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <0 32 4>;
> + bus-width = <4>;
This belongs to the board, the controller itself is able to handle
several bus width.
> + status = "disabled";
> + };
> +
> + mmc1: mmc@01c10000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ahb_gates 9>, <&mmc1_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <0 33 4>;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + mmc2: mmc@01c11000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ahb_gates 10>, <&mmc2_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <0 34 4>;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + mmc3: mmc@01c12000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c12000 0x1000>;
> + clocks = <&ahb_gates 11>, <&mmc3_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <0 35 4>;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> pio: pinctrl@01c20800 {
> compatible = "allwinner,sun7i-a20-pinctrl";
> reg = <0x01c20800 0x400>;
> @@ -432,6 +472,27 @@
> allwinner,drive = <0>;
> allwinner,pull = <0>;
> };
> +
> + mmc0_pins_a: mmc0@0 {
> + allwinner,pins =
> "PF0","PF1","PF2","PF3","PF4","PF5";
> + allwinner,function = "mmc0";
> + allwinner,drive = <3>;
> + allwinner,pull = <0>;
> + };
> +
> + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
> + allwinner,pins = "PH1";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <0>;
> + allwinner,pull = <1>;
> + };
> +
> + mmc3_pins_a: mmc3@0 {
> + allwinner,pins =
> "PI4","PI5","PI6","PI7","PI8","PI9";
> + allwinner,function = "mmc3";
> + allwinner,drive = <3>;
> + allwinner,pull = <0>;
> + };
> };
>
> timer@01c20c00 {
>
Looks good otherwise.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
signature.asc
Description: Digital signature
