On Thu, 2014-02-20 at 12:00 +0530, Jenny Tc wrote:
> On Mon, Feb 17, 2014 at 10:05:49AM +0100, Krzysztof Kozlowski wrote:
> > +static inline int max14577_init_eoc(struct max14577_charger *chg,
> > + unsigned int uamp)
> > +{
> > + unsigned int current_bits = 0xf;
> > + u8 reg_data;
> > +
> > + switch (chg->maxim_core->dev_type) {
> > + case MAXIM_DEVICE_TYPE_MAX77836:
> > + if (uamp < 5000)
> > + return -EINVAL; /* Requested current is too low */
> > +
> > + if (uamp == 7500)
> > + current_bits = 0x0;
>
> if (uamp <= 7500) ?
(uamp < 7500) will be mapped to 5000 uA (0x1) so it will be OK. It is
safer to use lower current. The register description looks like:
0000 - 7.5 mA
0001 - 5 mA
0010 - 10 mA
0011 - 15 mA
...
1010 - 50 mA
1011 - 60 mA
1111 - 100 mA
However for value between <7501, 9999> this function will return 0x1
(5000 uA) which is not perfect. Better is to return 0x0 (7500 uA).
I'll fix this in next version of patch.
>
> > + /* Initialize Overvoltage-Protection Threshold */
> > + switch (chg->pdata->ovp_uvolt) {
> > + case 7500000:
> > + reg_data = 0x0;
> > + break;
> > + case 6000000:
> > + case 6500000:
> > + case 7000000:
> > + reg_data = 0x1 + (chg->pdata->ovp_uvolt - 6000000) / 500000;
> > + break;
>
> Is it battery OVP or charger source OVP? If it's battery OVP, then minimum
> level as 6V seems to be unsafe even for 4.4V batteries.
It is on charger (input). Anyway only these 4 values are supported (6.0,
6.5, 7.0, 7.5 volts).
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
