Remove checking control_reg in [set|get]_voltage_sel and then convert to use
regulator_[set|get]_voltage_sel_regmap for [set|get]_voltage_sel callbacks.
The anatop-reg-offset property is a required property rather than optional
property. So the question is what is the meaning of setting anatop-reg-offset
to 0? If 0 is a valid setting for anatop-reg-offset and it has special meaning,
we had better document it in the binding document. Otherwise, remove the testing
for control_reg in the driver.
No anatop voltage regulator node in the dts files set anatop-reg-offset to 0.
So I think it's safe to remove testing if control_reg is 0.
Signed-off-by: Axel Lin <axel....@ingics.com>
---
drivers/regulator/anatop-regulator.c | 25 ++-----------------------
1 file changed, 2 insertions(+), 23 deletions(-)
diff --git a/drivers/regulator/anatop-regulator.c
b/drivers/regulator/anatop-regulator.c
index 38e8122..7c397bb 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -55,17 +55,6 @@ struct anatop_regulator {
int sel;
};
-static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
- unsigned selector)
-{
- struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-
- if (!anatop_reg->control_reg)
- return -ENOTSUPP;
-
- return regulator_set_voltage_sel_regmap(reg, selector);
-}
-
static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg,
unsigned int old_sel,
unsigned int new_sel)
@@ -92,16 +81,6 @@ static int anatop_regmap_set_voltage_time_sel(struct
regulator_dev *reg,
return ret;
}
-static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
-{
- struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-
- if (!anatop_reg->control_reg)
- return -ENOTSUPP;
-
- return regulator_get_voltage_sel_regmap(reg);
-}
-
static int anatop_regmap_enable(struct regulator_dev *reg)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
@@ -178,8 +157,8 @@ static int anatop_regmap_set_bypass(struct regulator_dev
*reg, bool enable)
}
static struct regulator_ops anatop_rops = {
- .set_voltage_sel = anatop_regmap_set_voltage_sel,
- .get_voltage_sel = anatop_regmap_get_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
