14_ide_pci_serverworks_merge.patch

        Merges ide/pci/serverworks.h into serverworks.c.


Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>


Index: linux-idepci-export/drivers/ide/pci/serverworks.c
===================================================================
--- linux-idepci-export.orig/drivers/ide/pci/serverworks.c      2005-02-04 
16:07:36.271461827 +0900
+++ linux-idepci-export/drivers/ide/pci/serverworks.c   2005-02-04 
16:08:27.019196797 +0900
@@ -39,7 +39,20 @@
 
 #include <asm/io.h>
 
-#include "serverworks.h"
+#undef SVWKS_DEBUG_DRIVE_INFO
+
+#define SVWKS_CSB5_REVISION_NEW        0x92 /* min PCI_REVISION_ID for UDMA5 
(A2.0) */
+#define SVWKS_CSB6_REVISION    0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
+
+/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
+ * can overrun their FIFOs when used with the CSB5 */
+static const char *svwks_bad_ata100[] = {
+       "ST320011A",
+       "ST340016A",
+       "ST360021A",
+       "ST380021A",
+       NULL
+};
 
 static u8 svwks_revision = 0;
 static struct pci_dev *isa_dev;
@@ -582,6 +595,48 @@ static int __init init_setup_csb6 (struc
        return ide_setup_pci_device(dev, d);
 }
 
+/*
+ *     Table of the various serverworks capability blocks
+ */
+
+static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
+       {       /* 0 */
+               .name           = "SvrWks OSB4",
+               .init_setup     = init_setup_svwks,
+               .init_chipset   = init_chipset_svwks,
+               .init_hwif      = init_hwif_svwks,
+               .channels       = 2,
+               .autodma        = AUTODMA,
+               .bootable       = ON_BOARD,
+       },{     /* 1 */
+               .name           = "SvrWks CSB5",
+               .init_setup     = init_setup_svwks,
+               .init_chipset   = init_chipset_svwks,
+               .init_hwif      = init_hwif_svwks,
+               .init_dma       = init_dma_svwks,
+               .channels       = 2,
+               .autodma        = AUTODMA,
+               .bootable       = ON_BOARD,
+       },{     /* 2 */
+               .name           = "SvrWks CSB6",
+               .init_setup     = init_setup_csb6,
+               .init_chipset   = init_chipset_svwks,
+               .init_hwif      = init_hwif_svwks,
+               .init_dma       = init_dma_svwks,
+               .channels       = 2,
+               .autodma        = AUTODMA,
+               .bootable       = ON_BOARD,
+       },{     /* 3 */
+               .name           = "SvrWks CSB6",
+               .init_setup     = init_setup_csb6,
+               .init_chipset   = init_chipset_svwks,
+               .init_hwif      = init_hwif_svwks,
+               .init_dma       = init_dma_svwks,
+               .channels       = 1,    /* 2 */
+               .autodma        = AUTODMA,
+               .bootable       = ON_BOARD,
+       }
+};
 
 /**
  *     svwks_init_one  -       called when a OSB/CSB is found
Index: linux-idepci-export/drivers/ide/pci/serverworks.h
===================================================================
--- linux-idepci-export.orig/drivers/ide/pci/serverworks.h      2005-02-04 
16:08:26.831227410 +0900
+++ /dev/null   1970-01-01 00:00:00.000000000 +0000
@@ -1,67 +0,0 @@
-
-#ifndef SERVERWORKS_H
-#define SERVERWORKS_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define SVWKS_CSB5_REVISION_NEW        0x92 /* min PCI_REVISION_ID for UDMA5 
(A2.0) */
-#define SVWKS_CSB6_REVISION    0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
-
-/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
- * can overrun their FIFOs when used with the CSB5 */
-static const char *svwks_bad_ata100[] = {
-       "ST320011A",
-       "ST340016A",
-       "ST360021A",
-       "ST380021A",
-       NULL
-};
-
-static int init_setup_svwks(struct pci_dev *, ide_pci_device_t *);
-static int init_setup_csb6(struct pci_dev *, ide_pci_device_t *);
-static unsigned int init_chipset_svwks(struct pci_dev *, const char *);
-static void init_hwif_svwks(ide_hwif_t *);
-static void init_dma_svwks(ide_hwif_t *, unsigned long);
-
-static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
-       {       /* 0 */
-               .name           = "SvrWks OSB4",
-               .init_setup     = init_setup_svwks,
-               .init_chipset   = init_chipset_svwks,
-               .init_hwif      = init_hwif_svwks,
-               .channels       = 2,
-               .autodma        = AUTODMA,
-               .bootable       = ON_BOARD,
-       },{     /* 1 */
-               .name           = "SvrWks CSB5",
-               .init_setup     = init_setup_svwks,
-               .init_chipset   = init_chipset_svwks,
-               .init_hwif      = init_hwif_svwks,
-               .init_dma       = init_dma_svwks,
-               .channels       = 2,
-               .autodma        = AUTODMA,
-               .bootable       = ON_BOARD,
-       },{     /* 2 */
-               .name           = "SvrWks CSB6",
-               .init_setup     = init_setup_csb6,
-               .init_chipset   = init_chipset_svwks,
-               .init_hwif      = init_hwif_svwks,
-               .init_dma       = init_dma_svwks,
-               .channels       = 2,
-               .autodma        = AUTODMA,
-               .bootable       = ON_BOARD,
-       },{     /* 3 */
-               .name           = "SvrWks CSB6",
-               .init_setup     = init_setup_csb6,
-               .init_chipset   = init_chipset_svwks,
-               .init_hwif      = init_hwif_svwks,
-               .init_dma       = init_dma_svwks,
-               .channels       = 1,    /* 2 */
-               .autodma        = AUTODMA,
-               .bootable       = ON_BOARD,
-       }
-};
-
-#endif /* SERVERWORKS_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to