Use managed devm_regulator_register to simplify the driver probe and driver remove functions. This allows removing from state container the pointer to regulator_dev returned on registering the regulator.
Patch also removes from state container pointer to 'struct device' as it is not used anywhere outside of max8952_pmic_probe() function. Signed-off-by: Krzysztof Kozlowski <[email protected]> --- drivers/regulator/max8952.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index 788e5ae2af1b..465f21f9d6ee 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -48,9 +48,7 @@ enum { struct max8952_data { struct i2c_client *client; - struct device *dev; struct max8952_platform_data *pdata; - struct regulator_dev *rdev; bool vid0; bool vid1; @@ -199,6 +197,7 @@ static int max8952_pmic_probe(struct i2c_client *client, struct max8952_platform_data *pdata = dev_get_platdata(&client->dev); struct regulator_config config = { }; struct max8952_data *max8952; + struct regulator_dev *rdev; int ret = 0, err = 0; @@ -219,10 +218,9 @@ static int max8952_pmic_probe(struct i2c_client *client, return -ENOMEM; max8952->client = client; - max8952->dev = &client->dev; max8952->pdata = pdata; - config.dev = max8952->dev; + config.dev = &client->dev; config.init_data = pdata->reg_data; config.driver_data = max8952; config.of_node = client->dev.of_node; @@ -231,11 +229,11 @@ static int max8952_pmic_probe(struct i2c_client *client, if (pdata->reg_data->constraints.boot_on) config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; - max8952->rdev = regulator_register(®ulator, &config); + rdev = devm_regulator_register(&client->dev, ®ulator, &config); - if (IS_ERR(max8952->rdev)) { - ret = PTR_ERR(max8952->rdev); - dev_err(max8952->dev, "regulator init failed (%d)\n", ret); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&client->dev, "regulator init failed (%d)\n", ret); return ret; } @@ -263,7 +261,7 @@ static int max8952_pmic_probe(struct i2c_client *client, err = 3; if (err) { - dev_warn(max8952->dev, "VID0/1 gpio invalid: " + dev_warn(&client->dev, "VID0/1 gpio invalid: " "DVS not available.\n"); max8952->vid0 = 0; max8952->vid1 = 0; @@ -274,7 +272,7 @@ static int max8952_pmic_probe(struct i2c_client *client, /* Disable Pulldown of EN only */ max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60); - dev_err(max8952->dev, "DVS modes disabled because VID0 and VID1" + dev_err(&client->dev, "DVS modes disabled because VID0 and VID1" " do not have proper controls.\n"); } else { /* @@ -321,9 +319,6 @@ static int max8952_pmic_remove(struct i2c_client *client) { struct max8952_data *max8952 = i2c_get_clientdata(client); struct max8952_platform_data *pdata = max8952->pdata; - struct regulator_dev *rdev = max8952->rdev; - - regulator_unregister(rdev); gpio_free(pdata->gpio_vid0); gpio_free(pdata->gpio_vid1); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
