The A31 SoC define a reset line for the R_PIO block which needs to be deasserted.
Try to retrieve a reset control and deassert if one was found. Signed-off-by: Boris BREZILLON <[email protected]> --- drivers/pinctrl/pinctrl-sunxi.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index 17b5f80..07af35a 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -26,6 +26,7 @@ #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/slab.h> #include "core.h" @@ -792,6 +793,7 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) const struct of_device_id *device; struct pinctrl_pin_desc *pins; struct sunxi_pinctrl *pctl; + struct reset_control *rstc; int i, ret, last_pin; struct clk *clk; @@ -887,10 +889,17 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) if (ret) goto gpiochip_error; + rstc = devm_reset_control_get_optional(&pdev->dev, NULL); + if (!IS_ERR(rstc)) { + ret = reset_control_deassert(rstc); + if (ret) + goto clk_error; + } + pctl->irq = irq_of_parse_and_map(node, 0); if (!pctl->irq) { ret = -EINVAL; - goto clk_error; + goto rstc_error; } pctl->domain = irq_domain_add_linear(node, SUNXI_IRQ_NUMBER, @@ -898,7 +907,7 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) if (!pctl->domain) { dev_err(&pdev->dev, "Couldn't register IRQ domain\n"); ret = -ENOMEM; - goto clk_error; + goto rstc_error; } for (i = 0; i < SUNXI_IRQ_NUMBER; i++) { @@ -916,6 +925,9 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) return 0; +rstc_error: + if (!IS_ERR(rstc)) + reset_control_assert(rstc); clk_error: clk_disable_unprepare(clk); gpiochip_error: -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
