Change the binding for regulators external control to the same used in s2mps11 driver to be consistent.
Signed-off-by: Krzysztof Kozlowski <[email protected]> Cc: Tomasz Figa <[email protected]> Cc: [email protected] Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Kumar Gala <[email protected]> --- Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt | 4 ++-- drivers/regulator/s5m8767.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt index d290988ed975..558c80345ef0 100644 --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt @@ -76,7 +76,7 @@ except these properties: 1 - on in normal mode 2 - low power mode 3 - suspend mode - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one + - samsung,ext-control-gpios: (optional) GPIO specifier for one GPIO controlling this regulator (enable/disable); This is valid only for buck9. @@ -157,7 +157,7 @@ Example: regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; op_mode = <3>; /* Standby Mode */ - s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 0>; }; }; }; diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 92f19a005dc3..dbfd98b04a77 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -534,7 +534,7 @@ static void s5m8767_pmic_dt_parse_ext_control_gpio(struct sec_pmic_dev *iodev, struct device_node *reg_np) { rdata->ext_control_gpio = of_get_named_gpio(reg_np, - "s5m8767,pmic-ext-control-gpios", 0); + "samsung,ext-control-gpios", 0); if (!gpio_is_valid(rdata->ext_control_gpio)) rdata->ext_control_gpio = 0; } -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
