The cpufreq core supports the cpufreq_for_each_entry macro helper
for iteration over the cpufreq_frequency_table, so use it.
It should have no functional changes.
Signed-off-by: Stratos Karafotis <strat...@semaphore.gr>
---
drivers/cpufreq/longhaul.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index d00e5d1..6de99c4 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -528,6 +528,7 @@ static int longhaul_get_ranges(void)
static void longhaul_setup_voltagescaling(void)
{
+ struct cpufreq_frequency_table *freq;
union msr_longhaul longhaul;
struct mV_pos minvid, maxvid, vid;
unsigned int j, speed, pos, kHz_step, numvscales;
@@ -606,18 +607,16 @@ static void longhaul_setup_voltagescaling(void)
/* Calculate kHz for one voltage step */
kHz_step = (highest_speed - min_vid_speed) / numvscales;
- j = 0;
- while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
- speed = longhaul_table[j].frequency;
+ cpufreq_for_each_entry(freq, longhaul_table) {
+ speed = freq->frequency;
if (speed > min_vid_speed)
pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
else
pos = minvid.pos;
- longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8;
+ freq->driver_data |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
- printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
- speed, j, vid.mV);
- j++;
+ printk(KERN_INFO PFX "f: %d kHz, index: %lu, vid: %d mV\n",
+ speed, freq - longhaul_table, vid.mV);
}
can_scale_voltage = 1;
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
