From: Srinivas Kandagatla <[email protected]> This patch adds write delay parameter required after each write to controller registers on some of the SOCs like Qualcomm ones. The delay parameter will provide information on how many clock cycle delay required after each write.
Signed-off-by: Srinivas Kandagatla <[email protected]> --- drivers/mmc/host/mmci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4f8d0ba..86bf330 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -55,6 +55,8 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) + * @reg_write_delay: delay in number of clock cycles required after each write + * to controller registers. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register @@ -72,6 +74,7 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; + unsigned int reg_write_delay; bool sdio; bool st_clkdiv; bool blksz_datactrl16; @@ -178,7 +181,12 @@ static inline u32 mmci_readl(struct mmci_host *host, u32 off) static inline void mmci_writel(struct mmci_host *host, u32 data, u32 off) { + struct variant_data *var = host->variant; + writel(data, host->base + off); + + if (var->reg_write_delay && host->mclk) + udelay(1 + ((var->reg_write_delay * USEC_PER_SEC)/host->mclk)); } static int mmci_card_busy(struct mmc_host *mmc) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
