This patch set adds support for the clocks having their own register set. Other clocks are available but they are sharing a common register in addition of their own registers. They will be supported in a following series.
Also, I realized that when moving the pll nodes out of the clocks container, they didn't get reorder. Changes in v2: - reworked berlin_clk_recalc_rate() as suggested by Sebastian - some dts tweaks, as suggested by Antoine Alexandre Belloni (5): clk: berlin: add support for clocks clk: berlin: add berlin clocks DT bindings documentation ARM: berlin/dt: add sdio clocks to BG2 ARM: berlin/dt: add sdio clocks to BG2CD ARM: berlin/dt: add sdio clocks to BG2Q .../devicetree/bindings/clock/berlin-clock.txt | 9 +- arch/arm/boot/dts/berlin2.dtsi | 42 ++++--- arch/arm/boot/dts/berlin2cd.dtsi | 42 ++++--- arch/arm/boot/dts/berlin2q.dtsi | 28 +++-- drivers/clk/berlin/Makefile | 2 +- drivers/clk/berlin/clk.c | 134 +++++++++++++++++++++ 6 files changed, 220 insertions(+), 37 deletions(-) create mode 100644 drivers/clk/berlin/clk.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
