Hello,
On Fri, 25 Apr 2014, Xufeng Zhang wrote:
> commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is
> in output route lookups.) introduces another regression which
> is very similar to the problem of commit e6b45241c (ipv4: reset
> flowi parameters on route connect) wants to fix:
> Before we call ip_route_output_key() in sctp_v4_get_dst() to
> get a dst that matches a bind address as the source address,
> we have already called this function previously and the flowi
> parameters have been initialized including flowi4_oif, so when
> we call this function again, the process in ip_route_output_slow()
> will be different because of the setting of flowi4_oif, and we'll
> get a networking device which corresponds to the inputted flowi4_oif
> as the output device, this is wrong because we'll never hit this
> place if the previously returned source address of dst match one
> of the bound addresses.
>
> To reproduce this problem, a vlan setting is enough:
> # ifconfig eth0 up
> # route del default
> # vconfig add eth0 2
> # vconfig add eth0 3
> # ifconfig eth0.2 10.0.1.14 netmask 255.255.255.0
> # route add default gw 10.0.1.254 dev eth0.2
> # ifconfig eth0.3 10.0.0.14 netmask 255.255.255.0
> # ip rule add from 10.0.0.14 table 4
> # ip route add table 4 default via 10.0.0.254 src 10.0.0.14 dev eth0.3
> # sctp_darn -H 10.0.0.14 -P 36422 -h 10.1.4.134 -p 36422 -s -I
> You'll detect that all the flow are routed to eth0.2(10.0.1.254).
>
> Signed-off-by: Xufeng Zhang <xufeng.zh...@windriver.com>
> ---
> net/sctp/protocol.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
> index c09757f..f8a5968 100644
> --- a/net/sctp/protocol.c
> +++ b/net/sctp/protocol.c
> @@ -493,6 +493,10 @@ static void sctp_v4_get_dst(struct sctp_transport *t,
> union sctp_addr *saddr,
> (AF_INET == laddr->a.sa.sa_family)) {
> fl4->saddr = laddr->a.v4.sin_addr.s_addr;
> fl4->fl4_sport = laddr->a.v4.sin_port;
> + /* Reset flowi4_oif so that it won't be incorrectly used
> + * as input parameter to routing lookups.
> + */
> + fl4->flowi4_oif = 0;
May be something like this is more correct:
flowi4_update_output(fl4,
asoc->base.sk->sk_bound_dev_if,
RT_CONN_FLAGS(asoc->base.sk),
daddr->v4.sin_addr.s_addr,
laddr->a.v4.sin_addr.s_addr);
> rt = ip_route_output_key(sock_net(sk), fl4);
> if (!IS_ERR(rt)) {
> dst = &rt->dst;
Regards
--
Julian Anastasov <j...@ssi.bg>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
