3.13.11.1 -stable review patch. If anyone has any objections, please let me know.
------------------ From: Larry Finger <[email protected]> commit 2610decdd0b3808ba20471a999835cfee5275f98 upstream. In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <[email protected]> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192se. Signed-off-by: Larry Finger <[email protected]> Signed-off-by: John W. Linville <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> --- drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 4f46178..c471400 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -955,7 +955,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); u8 tmp_byte = 0; - + unsigned long flags; bool rtstatus = true; u8 tmp_u1b; int err = false; @@ -967,6 +967,16 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) rtlpci->being_init_adapter = true; + /* As this function can take a very long time (up to 350 ms) + * and can be called with irqs disabled, reenable the irqs + * to let the other devices continue being serviced. + * + * It is safe doing so since our own interrupts will only be enabled + * in a subsequent step. + */ + local_save_flags(flags); + local_irq_enable(); + rtlpriv->intf_ops->disable_aspm(hw); /* 1. MAC Initialize */ @@ -984,7 +994,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, "Failed to download FW. Init HW without FW now... " "Please copy FW into /lib/firmware/rtlwifi\n"); - return 1; + err = 1; + goto exit; } /* After FW download, we have to reset MAC register */ @@ -997,7 +1008,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */ if (!rtl92s_phy_mac_config(hw)) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n"); - return rtstatus; + err = rtstatus; + goto exit; } /* because last function modify RCR, so we update @@ -1016,7 +1028,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */ if (!rtl92s_phy_bb_config(hw)) { RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n"); - return rtstatus; + err = rtstatus; + goto exit; } /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */ @@ -1033,7 +1046,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) if (!rtl92s_phy_rf_config(hw)) { RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n"); - return rtstatus; + err = rtstatus; + goto exit; } /* After read predefined TXT, we must set BB/MAC/RF @@ -1122,8 +1136,9 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON); rtl92s_dm_init(hw); +exit: + local_irq_restore(flags); rtlpci->being_init_adapter = false; - return err; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
