This converts Berlin BG2 SoC dtsi to make use of the new DT clock nodes for Berlin SoCs. While at it, also fix up twdclk which is running at cpuclk/3 instead of sysclk.
Signed-off-by: Sebastian Hesselbarth <[email protected]> --- Changelog: v1->v2: - adapt to new single chip control node and compatible Cc: Mike Turquette <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: Jisheng Zhang <[email protected]> Cc: [email protected] Cc: [email protected] --- arch/arm/boot/dts/berlin2.dtsi | 56 +++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 33 deletions(-) diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 57cadd31f4e1..591d4b8c1c2b 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -37,24 +38,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <400000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -88,7 +75,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -175,7 +162,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -184,7 +171,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -193,7 +180,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -202,7 +189,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -211,7 +198,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -220,7 +207,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -229,7 +216,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -238,7 +225,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -253,9 +240,12 @@ }; }; - generic-regs@ea0184 { - compatible = "marvell,berlin-generic-regs", "syscon"; - reg = <0xea0184 0x10>; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; }; apb@fc0000 { @@ -305,7 +295,7 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; @@ -315,7 +305,7 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; @@ -325,7 +315,7 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <10>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
