Hi !

(for -mm only for now, need feedback from x86 users)

This patch improves reliability of suspend/resume by making sure AGP is
disabled on the radeon chip before putting it into a suspend state. It
works in conjunction with the uninorth-agp suspend patch, but should
be harmless on machines with a different AGP bridge.

Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>

Index: linux-work/drivers/video/aty/radeon_pm.c
===================================================================
--- linux-work.orig/drivers/video/aty/radeon_pm.c       2005-03-01 
14:37:10.000000000 +1100
+++ linux-work/drivers/video/aty/radeon_pm.c    2005-03-01 14:58:44.000000000 
+1100
@@ -2400,7 +2400,8 @@
         * including PCI config registers, clocks, AGP conf, ...)
         */
        if (suspend) {
-               printk(KERN_DEBUG "radeonfb: switching to D2 state...\n");
+               printk(KERN_DEBUG "radeonfb (%s): switching to D2 state...\n",
+                      pci_name(rinfo->pdev));
 
                /* Disable dynamic power management of clocks for the
                 * duration of the suspend/resume process
@@ -2453,7 +2454,8 @@
                        mdelay(500);
                }
        } else {
-               printk(KERN_DEBUG "radeonfb: switching to D0 state...\n");
+               printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
+                      pci_name(rinfo->pdev));
 
                /* Switch back PCI powermanagment to D0 */
                mdelay(200);
@@ -2507,6 +2509,7 @@
 {
         struct fb_info *info = pci_get_drvdata(pdev);
         struct radeonfb_info *rinfo = info->par;
+       u8 agp;
        int i;
 
        if (state == pdev->dev.power.power_state)
@@ -2523,7 +2526,8 @@
        if (state != PM_SUSPEND_MEM)
                goto done;
        if (susdisking) {
-               printk("suspending to disk but state = %d\n", state);
+               printk("radeonfb (%s): suspending to disk but state = %d\n",
+                      pci_name(pdev), state);
                goto done;
        }
 
@@ -2546,6 +2550,28 @@
        rinfo->lock_blank = 1;
        del_timer_sync(&rinfo->lvds_timer);
 
+       /* Disable AGP. The AGP host should have done it, but since ordering
+        * isn't always properly guaranteed in this specific case, let's make
+        * sure it's disabled on card side now. Ultimately, when merging fbdev
+        * and dri into some common infrastructure, this will be handled
+        * more nicely. The host bridge side will (or will not) be dealt with
+        * by the bridge AGP driver, we don't attempt to touch it here.
+        */
+       agp = pci_find_capability(pdev, PCI_CAP_ID_AGP);
+       if (agp) {
+               u32 cmd;
+
+               pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
+               if (cmd & PCI_AGP_COMMAND_AGP) {
+                       printk(KERN_INFO "radeonfb (%s): AGP was enabled, "
+                              "disabling ...\n",
+                              pci_name(pdev));
+                       cmd &= ~PCI_AGP_COMMAND_AGP;
+                       pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND,
+                                              cmd);
+               }
+       }
+
        /* If we support wakeup from poweroff, we save all regs we can 
including cfg
         * space
         */
@@ -2569,12 +2595,11 @@
                        OUTREG(LVDS_PLL_CNTL, (INREG(LVDS_PLL_CNTL) & ~30000) | 
0x20000);
                        mdelay(20);
                        OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & 
~(LVDS_DIGON));
-
-                       // FIXME: Use PCI layer
-                       for (i = 0; i < 64; ++i)
-                               pci_read_config_dword(rinfo->pdev, i * 4,
-                                                     &rinfo->cfg_save[i]);
                }
+               // FIXME: Use PCI layer
+               for (i = 0; i < 64; ++i)
+                       pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
+               pci_disable_device(pdev);
        }
        /* If we support D2, we go to it (should be fixed later with a flag 
forcing
         * D3 only for some laptops)



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to