Hi Thomas, Ingo,

this time we have a big number of changes in the clockevents.

There is a branch shared between Simon and I with two merges. The first merge was to pull the cmt,mtu changes from Laurent into the clockevents/cmt-mtu2-tmu-cleanups branch. Then this one has been merged in the clockevents/3.16. A bit later, a new fix on top of these changes has been provided and applied to clockevents/cmt-mtu2-tmu-cleanups with a second merge to clockevents/3.16.

clockevents/cmt-mtu2-tmu-cleanups will stay there until the 3.16 is released.

This pull request contains the following changes:

* Laurent Pinchart did a lot of modifications to prepare the DT support. These modifications include a lot of cleanup (structure renaming, preparation to support multiple channel, kzalloc usage, ...) and then finishes to drop the old code to the new one.

* Jingoo Han removed the dev_err when an allocation fails because this error is already given by the mm subsystems.
        * http://patchwork.ozlabs.org/patch/324158/
* [conflict resolved] kmalloc => kzalloc changes with cmt,tmu, mtu cleanups from Laurent Pinchard

* Matthew Leach added the ARM global timer with vexpress, enabled the ARM global timer with the A5 and added the definition in the DT. He also fixed a invalid check when looking for an usable ARM global timer for A9

* Maxime Ripard added the support for AllWinner A31 for sun4i and made the timer reset optional through the DT

 * Stephen Boyd used the msm timer for the udelay

 * Uwe Kleine-König fixed the non-standard 'compatible' binding for efm32

* Xiubo Li clarified the types for the clocksource_mmio_read* and added a new Flextimer Module (FTM) with its bindings

* Yang Wei added the 'notrace' attribute to 'read_sched_clock' for the dw_apb_timer

The following changes since commit 2779ac167b1a1bf8153dca9f3a141c6148c6b89f:

timer_stats/doc: Fix /proc/timer_stats documentation (2014-05-04 20:46:32 +0200)

are available in the git repository at:

  git://git.linaro.org/people/daniel.lezcano/linux.git clockevents/3.16

for you to fetch changes up to 2529c3a330797000d699d70c9a65b8525c6652de:

clocksource: Add Freescale FlexTimer Module (FTM) timer support (2014-05-23 10:12:04 +0200)

----------------------------------------------------------------
Daniel Lezcano (3):
Merge branch 'clockevents/cmt-mtu2-tmu-cleanups' into clockevents/3.16 Merge remote-tracking branch 'tip/timers/core/timers/core' into clockevents/3.16 Merge branch 'clockevents/cmt-mtu2-tmu-cleanups' into clockevents/3.16

Jingoo Han (4):
      clocksource: em_sti: Remove unnecessary OOM messages
      clocksource: sh_cmt: Remove unnecessary OOM messages
      clocksource: sh_mtu2: Remove unnecessary OOM messages
      clocksource: sh_tmu: Remove unnecessary OOM messages

Laurent Pinchart (53):
      clocksource: sh_cmt: Use request_irq() instead of setup_irq()
      clocksource: sh_cmt: Split channel fields from sh_cmt_priv
      clocksource: sh_cmt: Rename struct sh_cmt_priv to sh_cmt_device
      clocksource: sh_cmt: Split channel setup to separate function
      clocksource: sh_cmt: Constify name argument to sh_cmt_register()
      clocksource: sh_cmt: Rename mapbase/mapbase_str to mapbase_ch/mapbase
      clocksource: sh_cmt: Add memory base to sh_cmt_channel structure
      clocksource: sh_cmt: Add index to struct sh_cmt_channel
      clocksource: sh_cmt: Replace kmalloc + memset with kzalloc
      clocksource: sh_cmt: Allocate channels dynamically
      clocksource: sh_cmt: Split static information from sh_cmt_device
      clocksource: sh_cmt: Replace hardcoded register values with macros
      clocksource: sh_cmt: Set cpumask to cpu_possible_mask
      clocksource: sh_cmt: Hardcode CMT clock event rating to 125
      clocksource: sh_cmt: Hardcode CMT clock source rating to 125
      clocksource: sh_cmt: Add support for multiple channels per device
      clocksource: sh_cmt: Rename clock to "fck" in the non-legacy case
      clocksource: sh_cmt: Remove FSF mail address from GPL notice
      clocksource: sh_cmt: Sort headers alphabetically
      clocksource: sh_cmt: Request IRQ for clock event device only
      clocksource: sh_tmu: Use request_irq() instead of setup_irq()
      clocksource: sh_tmu: Split channel fields from sh_tmu_priv
      clocksource: sh_tmu: Rename struct sh_tmu_priv to sh_tmu_device
      clocksource: sh_tmu: Split channel setup to separate function
      clocksource: sh_tmu: Constify name argument to sh_tmu_register()
      clocksource: sh_tmu: Add memory base to sh_tmu_channel structure
      clocksource: sh_tmu: Add index to struct sh_tmu_channel
      clocksource: sh_tmu: Replace kmalloc + memset with kzalloc
      clocksource: sh_tmu: Allocate channels dynamically
      clocksource: sh_tmu: Replace hardcoded register values with macros
clocksource: sh_tmu: Hardcode TMU clock event and source ratings to 200
      clocksource: sh_tmu: Add support for multiple channels per device
      clocksource: sh_tmu: Rename clock to "fck" in the non-legacy case
      clocksource: sh_tmu: Remove FSF mail address from GPL notice
      clocksource: sh_tmu: Sort headers alphabetically
      clocksource: sh_mtu2: Use request_irq() instead of setup_irq()
      clocksource: sh_mtu2: Turn sh_mtu2_priv fields into local variables
      clocksource: sh_mtu2: Split channel fields from sh_mtu2_priv
      clocksource: sh_mtu2: Rename struct sh_mtu2_priv to sh_mtu2_device
      clocksource: sh_mtu2: Split channel setup to separate function
      clocksource: sh_mtu2: Constify name argument to sh_mtu2_register()
      clocksource: sh_mtu2: Add memory base to sh_mtu2_channel structure
      clocksource: sh_mtu2: Add index to struct sh_mtu2_channel
      clocksource: sh_mtu2: Replace kmalloc + memset with kzalloc
      clocksource: sh_mtu2: Allocate channels dynamically
      clocksource: sh_mtu2: Replace hardcoded register values with macros
      clocksource: sh_mtu2: Set cpumask to cpu_possible_mask
      clocksource: sh_mtu2: Hardcode MTU2 clock event rating to 200
      clocksource: sh_mtu2: Add support for multiple channels per device
      clocksource: sh_mtu2: Rename clock to "fck" in the non-legacy case
      clocksource: sh_mtu2: Remove FSF mail address from GPL notice
      clocksource: sh_mtu2: Sort headers alphabetically
      clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case

Matthew Leach (4):
      clocksource: arm_global_timer: Only check for unusable timer on A9
      documentaion: DT: allow a A5 compatible string in global timer
      dts: ca5: add the global timer for the A5
      KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform

Maxime Ripard (2):
      clocksource: sun5i: Add support for reset controller
      ARM: sun6i: a31: Add support for the High Speed Timers

Stephen Boyd (1):
      clocksource: qcom: Implement read_current_timer for udelay

Uwe Kleine-König (1):
      clocksource: efm32: use $vendor,$device scheme for compatible string

Xiubo Li (5):
      clocksource: Fix type confusion for clocksource_mmio_readX_Y
      clocksource: Fix clocksource_mmio_readX_down
clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation
      ARM: dts: vf610: Add Freescale FlexTimer Module timer node.
      clocksource: Add Freescale FlexTimer Module (FTM) timer support

Yang Wei (1):
      clocksource: dw_apb_timer_of: Do not trace read_sched_clock

 .../devicetree/bindings/arm/global_timer.txt       |    7 +-
 .../bindings/timer/allwinner,sun5i-a13-hstimer.txt |    4 +
 ...efm32,timer.txt => energymicro,efm32-timer.txt} |    4 +-
 .../devicetree/bindings/timer/fsl,ftm-timer.txt    |   31 +
 arch/arm/boot/dts/sun6i-a31.dtsi                   |   11 +
 arch/arm/boot/dts/vexpress-v2p-ca5s.dts            |   10 +-
 arch/arm/boot/dts/vf610.dtsi                       |   13 +
 arch/arm/mach-vexpress/Kconfig                     |    1 +
 drivers/clocksource/Kconfig                        |    5 +
 drivers/clocksource/Makefile                       |    1 +
 drivers/clocksource/arm_global_timer.c             |    5 +-
 drivers/clocksource/dw_apb_timer_of.c              |    2 +-
 drivers/clocksource/em_sti.c                       |    4 +-
 drivers/clocksource/fsl_ftm_timer.c                |  367 ++++++++
 drivers/clocksource/mmio.c                         |    8 +-
 drivers/clocksource/qcom-timer.c                   |   13 +
drivers/clocksource/sh_cmt.c | 958 +++++++++++++-------
 drivers/clocksource/sh_mtu2.c                      |  490 +++++++---
 drivers/clocksource/sh_tmu.c                       |  543 ++++++-----
 drivers/clocksource/time-efm32.c                   |    3 +-
 drivers/clocksource/timer-sun5i.c                  |    6 +
 include/linux/sh_timer.h                           |    1 +
 22 files changed, 1785 insertions(+), 702 deletions(-)
rename Documentation/devicetree/bindings/timer/{efm32,timer.txt => energymicro,efm32-timer.txt} (87%) create mode 100644 Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
 create mode 100644 drivers/clocksource/fsl_ftm_timer.c


--
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to