A few drivers for Zynq peripherals made it into mainline recently. Enable them in the defconfig. The following devices are enabled: - Cadence Macb Ethernet controller - Cadence I2C controller - Arasan SDHCI
Signed-off-by: Soren Brinkmann <[email protected]> --- After quite a while I gave the defonfig a shot again. At first try it directly booted my Zynq board to a usable login prompt, and with this patch even some peripherals work out of the box. Thanks, Sören --- arch/arm/configs/multi_v7_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index d4e8a47a2f7c..763054810ccf 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -121,6 +121,7 @@ CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y +CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -175,6 +176,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_SIRF=y @@ -272,6 +274,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_DOVE=y -- 1.9.3.1.ga73a6ad -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
