Hey DaeSeok,
I fixed all of them except -
this "if" condition like below:
if (5 == wrqu->encoding.length || 13 == wrqu->encoding.length)
mask = 0x00;
and this should be outside "for" loop
Can you please elaborate on this?
Thanks,
Chaitanya
On Mon, May 26, 2014 at 11:56 PM, DaeSeok Youn <daeseok.y...@gmail.com> wrote:
> Hi,
>
> 2014-05-27 14:43 GMT+09:00 Chaitanya Hazarey <c...@24.io>:
>> Fixed the following:
>>
>> ERROR: do not use C99 // comments
>> ERROR: else should follow close brace '}'
>> ERROR: need consistent spacing around '*' (ctx:WxV)
>> ERROR: need consistent spacing around '|' (ctx:VxW)
>> ERROR: space prohibited after that open parenthesis '('
>> ERROR: space prohibited before that '--' (ctx:WxO)
>> ERROR: space prohibited before that close parenthesis ')'
>> ERROR: space required after that ',' (ctx:VxV)
>> ERROR: space required after that ';' (ctx:VxV)
>> ERROR: space required after that close brace '}'
>> ERROR: space required before the open brace '{'
>> ERROR: space required before the open parenthesis '('
>> ERROR: spaces required around that '!=' (ctx:VxV)
>> ERROR: spaces required around that '!=' (ctx:WxV)
>> ERROR: spaces required around that '&&' (ctx:VxV)
>> ERROR: spaces required around that '<' (ctx:VxV)
>> ERROR: spaces required around that '=' (ctx:VxV)
>> ERROR: spaces required around that '=' (ctx:VxW)
>> ERROR: spaces required around that '=' (ctx:WxV)
>> ERROR: spaces required around that '==' (ctx:VxV)
>> ERROR: that open brace { should be on the previous line
>> ERROR: trailing statements should be on next line
>> WARNING: Missing a blank line after declarations
>> WARNING: missing space after struct definition
>> WARNING: please, no spaces at the start of a line
>> WARNING: suspect code indent for conditional statements (16, 16)
>
> Please break this up into smaller patches.
> And need to resend this patch.
>>
>> Signed-off-by: Chaitanya Hazarey <c...@24.io>
>> ---
>> drivers/staging/rtl8192u/r8180_93cx6.c | 58 ++---
>> drivers/staging/rtl8192u/r8192U_wx.c | 373
>> +++++++++++++++++---------------
>> 2 files changed, 223 insertions(+), 208 deletions(-)
>>
>> diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c
>> b/drivers/staging/rtl8192u/r8180_93cx6.c
>> index cd06054..7a0051e 100644
>> --- a/drivers/staging/rtl8192u/r8180_93cx6.c
>> +++ b/drivers/staging/rtl8192u/r8180_93cx6.c
>> @@ -53,7 +53,7 @@ static void eprom_ck_cycle(struct net_device *dev)
>> }
>>
>>
>> -static void eprom_w(struct net_device *dev,short bit)
>> +static void eprom_w(struct net_device *dev, short bit)
>> {
>> u8 cmdreg;
>>
>> @@ -86,7 +86,7 @@ static void eprom_send_bits_string(struct net_device *dev,
>> short b[], int len)
>> {
>> int i;
>>
>> - for(i=0; i<len; i++){
>> + for (i = 0 ; i < len ; i++) {
> I think it doesn't need to add a space between "i = 0" and ";".
> just like below:
> for (i = 0; i < len; i++) {
>
>> eprom_w(dev, b[i]);
>> eprom_ck_cycle(dev);
>> }
>> @@ -96,50 +96,50 @@ static void eprom_send_bits_string(struct net_device
>> *dev, short b[], int len)
>> u32 eprom_read(struct net_device *dev, u32 addr)
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> - short read_cmd[]={1,1,0};
>> + short read_cmd[] = {1, 1, 0};
>> short addr_str[8];
>> int i;
>> int addr_len;
>> u32 ret;
>>
>> - ret=0;
>> - //enable EPROM programming
>> + ret = 0;
>> + /* enable EPROM programming */
>> write_nic_byte_E(dev, EPROM_CMD,
>> (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
>> force_pci_posting(dev);
>> udelay(EPROM_DELAY);
>>
>> - if (priv->epromtype==EPROM_93c56){
>> - addr_str[7]=addr & 1;
>> - addr_str[6]=addr & (1<<1);
>> - addr_str[5]=addr & (1<<2);
>> - addr_str[4]=addr & (1<<3);
>> - addr_str[3]=addr & (1<<4);
>> - addr_str[2]=addr & (1<<5);
>> - addr_str[1]=addr & (1<<6);
>> - addr_str[0]=addr & (1<<7);
>> - addr_len=8;
>> - }else{
>> - addr_str[5]=addr & 1;
>> - addr_str[4]=addr & (1<<1);
>> - addr_str[3]=addr & (1<<2);
>> - addr_str[2]=addr & (1<<3);
>> - addr_str[1]=addr & (1<<4);
>> - addr_str[0]=addr & (1<<5);
>> - addr_len=6;
>> + if (priv->epromtype == EPROM_93c56) {
>> + addr_str[7] = addr & 1;
>> + addr_str[6] = addr & (1<<1);
>> + addr_str[5] = addr & (1<<2);
>> + addr_str[4] = addr & (1<<3);
>> + addr_str[3] = addr & (1<<4);
>> + addr_str[2] = addr & (1<<5);
>> + addr_str[1] = addr & (1<<6);
>> + addr_str[0] = addr & (1<<7);
>> + addr_len = 8;
>> + } else {
>> + addr_str[5] = addr & 1;
>> + addr_str[4] = addr & (1<<1);
>> + addr_str[3] = addr & (1<<2);
>> + addr_str[2] = addr & (1<<3);
>> + addr_str[1] = addr & (1<<4);
>> + addr_str[0] = addr & (1<<5);
>> + addr_len = 6;
>> }
>> eprom_cs(dev, 1);
>> eprom_ck_cycle(dev);
>> eprom_send_bits_string(dev, read_cmd, 3);
>> eprom_send_bits_string(dev, addr_str, addr_len);
>>
>> - //keep chip pin D to low state while reading.
>> - //I'm unsure if it is necessary, but anyway shouldn't hurt
>> + /* keep chip pin D to low state while reading.*/
>> + /* I'm unsure if it is necessary, but anyway shouldn't hurt*/
>> eprom_w(dev, 0);
>>
>> - for(i=0;i<16;i++){
>> - //eeprom needs a clk cycle between writing opcode&adr
>> - //and reading data. (eeprom outs a dummy 0)
>> + for (i = 0 ; i < 16 ; i++) {
> same above my comment.
>
>> + /* eeprom needs a clk cycle between writing opcode&adr */
>> + /* and reading data. (eeprom outs a dummy 0) */
>> eprom_ck_cycle(dev);
>> ret |= (eprom_r(dev)<<(15-i));
>> }
>> @@ -147,7 +147,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
>> eprom_cs(dev, 0);
>> eprom_ck_cycle(dev);
>>
>> - //disable EPROM programming
>> + /* disable EPROM programming */
>> write_nic_byte_E(dev, EPROM_CMD,
>> (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
>> return ret;
>> diff --git a/drivers/staging/rtl8192u/r8192U_wx.c
>> b/drivers/staging/rtl8192u/r8192U_wx.c
>> index dab716f..5dd0654 100644
>> --- a/drivers/staging/rtl8192u/r8192U_wx.c
>> +++ b/drivers/staging/rtl8192u/r8192U_wx.c
>> @@ -24,8 +24,8 @@
>> #include "dot11d.h"
>>
>> #define RATE_COUNT 12
>> -u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
>> -
>> 6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000};
>> +u32 rtl8180_rates[] = {1000000, 2000000, 5500000, 11000000,
>> + 6000000, 9000000, 12000000, 18000000, 24000000, 36000000, 48000000,
>> 54000000};
>>
>>
>> #ifndef ENETDOWN
>> @@ -38,16 +38,16 @@ static int r8192_wx_get_freq(struct net_device *dev,
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>>
>> - return ieee80211_wx_get_freq(priv->ieee80211,a,wrqu,b);
>> + return ieee80211_wx_get_freq(priv->ieee80211, a, wrqu, b);
>> }
>>
>>
>> static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info
>> *a,
>> union iwreq_data *wrqu, char *b)
>> {
>> - struct r8192_priv *priv=ieee80211_priv(dev);
>> + struct r8192_priv *priv = ieee80211_priv(dev);
>>
>> - return ieee80211_wx_get_mode(priv->ieee80211,a,wrqu,b);
>> + return ieee80211_wx_get_mode(priv->ieee80211, a, wrqu, b);
>> }
>>
>>
>> @@ -57,7 +57,8 @@ static int r8192_wx_get_rate(struct net_device *dev,
>> union iwreq_data *wrqu, char *extra)
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> - return ieee80211_wx_get_rate(priv->ieee80211,info,wrqu,extra);
>> +
>> + return ieee80211_wx_get_rate(priv->ieee80211, info, wrqu, extra);
>> }
>>
>>
>> @@ -71,7 +72,7 @@ static int r8192_wx_set_rate(struct net_device *dev,
>>
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_set_rate(priv->ieee80211,info,wrqu,extra);
>> + ret = ieee80211_wx_set_rate(priv->ieee80211, info, wrqu, extra);
>>
>> up(&priv->wx_sem);
>>
>> @@ -88,7 +89,7 @@ static int r8192_wx_set_rts(struct net_device *dev,
>>
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_set_rts(priv->ieee80211,info,wrqu,extra);
>> + ret = ieee80211_wx_set_rts(priv->ieee80211, info, wrqu, extra);
>>
>> up(&priv->wx_sem);
>>
>> @@ -100,7 +101,7 @@ static int r8192_wx_get_rts(struct net_device *dev,
>> union iwreq_data *wrqu, char *extra)
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> - return ieee80211_wx_get_rts(priv->ieee80211,info,wrqu,extra);
>> + return ieee80211_wx_get_rts(priv->ieee80211, info, wrqu, extra);
>> }
>>
>> static int r8192_wx_set_power(struct net_device *dev,
>> @@ -112,7 +113,7 @@ static int r8192_wx_set_power(struct net_device *dev,
>>
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_set_power(priv->ieee80211,info,wrqu,extra);
>> + ret = ieee80211_wx_set_power(priv->ieee80211, info, wrqu, extra);
>>
>> up(&priv->wx_sem);
>>
>> @@ -124,7 +125,8 @@ static int r8192_wx_get_power(struct net_device *dev,
>> union iwreq_data *wrqu, char *extra)
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> - return ieee80211_wx_get_power(priv->ieee80211,info,wrqu,extra);
>> +
>> + return ieee80211_wx_get_power(priv->ieee80211, info, wrqu, extra);
>> }
>>
>> static int r8192_wx_force_reset(struct net_device *dev,
>> @@ -135,7 +137,7 @@ static int r8192_wx_force_reset(struct net_device *dev,
>>
>> down(&priv->wx_sem);
>>
>> - printk("%s(): force reset ! extra is %d\n",__func__, *extra);
>> + printk("%s(): force reset ! extra is %d\n", __func__, *extra);
>> priv->force_reset = *extra;
>> up(&priv->wx_sem);
>> return 0;
>> @@ -171,17 +173,17 @@ static int r8192_wx_set_crcmon(struct net_device *dev,
>>
>> down(&priv->wx_sem);
>>
>> - if(enable)
>> - priv->crcmon=1;
>> + if (enable)
>> + priv->crcmon = 1;
>> else
>> - priv->crcmon=0;
>> + priv->crcmon = 0;
>>
>> DMESG("bad CRC in monitor mode are %s",
>> priv->crcmon ? "accepted" : "rejected");
>>
>> - if(prev != priv->crcmon && priv->up){
>> - //rtl8180_down(dev);
>> - //rtl8180_up(dev);
>> + if (prev != priv->crcmon && priv->up) {
>> + /*rtl8180_down(dev);*/
>> + /*rtl8180_up(dev);*/
>> }
>>
>> up(&priv->wx_sem);
>> @@ -194,9 +196,10 @@ static int r8192_wx_set_mode(struct net_device *dev,
>> struct iw_request_info *a,
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> int ret;
>> +
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_set_mode(priv->ieee80211,a,wrqu,b);
>> + ret = ieee80211_wx_set_mode(priv->ieee80211, a, wrqu, b);
>>
>> rtl8192_set_rxconf(dev);
>>
>> @@ -249,16 +252,16 @@ static int rtl8180_wx_get_range(struct net_device *dev,
>> /* ~5 Mb/s real (802.11b) */
>> range->throughput = 5 * 1000 * 1000;
>>
>> - // TODO: Not used in 802.11b?
>> -// range->min_nwid; /* Minimal NWID we are able to set */
>> - // TODO: Not used in 802.11b?
>> -// range->max_nwid; /* Maximal NWID we are able to set */
>> + /* TODO: Not used in 802.11b? */
>> +/* range->min_nwid; */ /* Minimal NWID we are able to set */
>> + /* TODO: Not used in 802.11b? */
>> +/* range->max_nwid; */ /* Maximal NWID we are able to set */
>>
>> /* Old Frequency (backward compat - moved lower ) */
>> -// range->old_num_channels;
>> -// range->old_num_frequency;
>> -// range->old_freq[6]; /* Filler to keep "version" at the same offset */
>> - if(priv->rf_set_sens != NULL)
>> +/* range->old_num_channels; */
>> +/* range->old_num_frequency; */
>> +/* range->old_freq[6]; */ /* Filler to keep "version" at the same
>> offset */
>> + if (priv->rf_set_sens != NULL)
>> range->sensitivity = priv->max_sens; /* signal level
>> threshold range */
>>
>> range->max_qual.qual = 100;
>> @@ -281,7 +284,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
>> range->min_frag = MIN_FRAG_THRESHOLD;
>> range->max_frag = MAX_FRAG_THRESHOLD;
>>
>> - range->min_pmp=0;
>> + range->min_pmp = 0;
>> range->max_pmp = 5000000;
>> range->min_pmt = 0;
>> range->max_pmt = 65535*1000;
>> @@ -292,30 +295,30 @@ static int rtl8180_wx_get_range(struct net_device *dev,
>> range->we_version_compiled = WIRELESS_EXT;
>> range->we_version_source = 16;
>>
>> -// range->retry_capa; /* What retry options are supported */
>> -// range->retry_flags; /* How to decode max/min retry limit */
>> -// range->r_time_flags; /* How to decode max/min retry life */
>> -// range->min_retry; /* Minimal number of retries */
>> -// range->max_retry; /* Maximal number of retries */
>> -// range->min_r_time; /* Minimal retry lifetime */
>> -// range->max_r_time; /* Maximal retry lifetime */
>> +/* range->retry_capa; */ /* What retry options are supported */
>> +/* range->retry_flags; */ /* How to decode max/min retry limit */
>> +/* range->r_time_flags; */ /* How to decode max/min retry life */
>> +/* range->min_retry; */ /* Minimal number of retries */
>> +/* range->max_retry; */ /* Maximal number of retries */
>> +/* range->min_r_time; */ /* Minimal retry lifetime */
>> +/* range->max_r_time; */ /* Maximal retry lifetime */
>>
>>
>> for (i = 0, val = 0; i < 14; i++) {
>>
>> - // Include only legal frequencies for some countries
>> + /* Include only legal frequencies for some countries */
>> if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
>> range->freq[val].i = i + 1;
>> range->freq[val].m = ieee80211_wlan_frequencies[i] *
>> 100000;
>> range->freq[val].e = 1;
>> val++;
>> } else {
>> - // FIXME: do we need to set anything for channels
>> - // we don't use ?
>> + /* FIXME: do we need to set anything for channels */
>> + /* we don't use ? */
>> }
>>
>> if (val == IW_MAX_FREQUENCIES)
>> - break;
>> + break;
>> }
>> range->num_frequency = val;
>> range->num_channels = val;
>> @@ -333,30 +336,28 @@ static int r8192_wx_set_scan(struct net_device *dev,
>> struct iw_request_info *a,
>> struct ieee80211_device *ieee = priv->ieee80211;
>> int ret = 0;
>>
>> - if(!priv->up) return -ENETDOWN;
>> + if (!priv->up)
>> + return -ENETDOWN;
>>
>> if (priv->ieee80211->LinkDetectInfo.bBusyTraffic == true)
>> return -EAGAIN;
>> - if (wrqu->data.flags & IW_SCAN_THIS_ESSID)
>> - {
>> + if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
>> struct iw_scan_req *req = (struct iw_scan_req *)b;
>> - if (req->essid_len)
>> - {
>> - //printk("==**&*&*&**===>scan set ssid:%s\n",
>> req->essid);
>> + if (req->essid_len) {
>> + /* printk("==**&*&*&**===>scan set ssid:%s\n",
>> req->essid); */
> this dead code can be removed.
>> ieee->current_network.ssid_len = req->essid_len;
>> memcpy(ieee->current_network.ssid, req->essid,
>> req->essid_len);
>> - //printk("=====>network ssid:%s\n",
>> ieee->current_network.ssid);
>> + /* printk("=====>network ssid:%s\n",
>> ieee->current_network.ssid); */
> this dead code can be removed.
>> }
>> }
>>
>> down(&priv->wx_sem);
>> - if(priv->ieee80211->state != IEEE80211_LINKED){
>> + if (priv->ieee80211->state != IEEE80211_LINKED) {
>> priv->ieee80211->scanning = 0;
>> ieee80211_softmac_scan_syncro(priv->ieee80211);
>> ret = 0;
>> - }
>> - else
>> - ret = ieee80211_wx_set_scan(priv->ieee80211,a,wrqu,b);
>> + } else
>> + ret = ieee80211_wx_set_scan(priv->ieee80211, a, wrqu, b);
> "if" has a curly brace and then "else" add brace also.
>
>> up(&priv->wx_sem);
>> return ret;
>> }
>> @@ -369,11 +370,12 @@ static int r8192_wx_get_scan(struct net_device *dev,
>> struct iw_request_info *a,
>> int ret;
>> struct r8192_priv *priv = ieee80211_priv(dev);
>>
>> - if(!priv->up) return -ENETDOWN;
>> + if (!priv->up)
>> + return -ENETDOWN;
>>
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_get_scan(priv->ieee80211,a,wrqu,b);
>> + ret = ieee80211_wx_get_scan(priv->ieee80211, a, wrqu, b);
>>
>> up(&priv->wx_sem);
>>
>> @@ -386,9 +388,10 @@ static int r8192_wx_set_essid(struct net_device *dev,
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> int ret;
>> +
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_set_essid(priv->ieee80211,a,wrqu,b);
>> + ret = ieee80211_wx_set_essid(priv->ieee80211, a, wrqu, b);
>>
>> up(&priv->wx_sem);
>>
>> @@ -480,10 +483,11 @@ static int r8192_wx_set_wap(struct net_device *dev,
>>
>> int ret;
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> -// struct sockaddr *temp = (struct sockaddr *)awrq;
>> +/* struct sockaddr *temp = (struct sockaddr *)awrq; */
>> +
>> down(&priv->wx_sem);
>>
>> - ret = ieee80211_wx_set_wap(priv->ieee80211,info,awrq,extra);
>> + ret = ieee80211_wx_set_wap(priv->ieee80211, info, awrq, extra);
>>
>> up(&priv->wx_sem);
>>
>> @@ -498,7 +502,7 @@ static int r8192_wx_get_wap(struct net_device *dev,
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>>
>> - return ieee80211_wx_get_wap(priv->ieee80211,info,wrqu,extra);
>> + return ieee80211_wx_get_wap(priv->ieee80211, info, wrqu, extra);
>> }
>>
>>
>> @@ -519,35 +523,38 @@ static int r8192_wx_set_enc(struct net_device *dev,
>> struct ieee80211_device *ieee = priv->ieee80211;
>> int ret;
>>
>> - //u32 TargetContent;
>> - u32 hwkey[4]={0,0,0,0};
>> - u8 mask=0xff;
>> - u32 key_idx=0;
>> - //u8 broadcast_addr[6] ={ 0xff,0xff,0xff,0xff,0xff,0xff};
>> - u8 zero_addr[4][6] ={ {0x00,0x00,0x00,0x00,0x00,0x00},
>> - {0x00,0x00,0x00,0x00,0x00,0x01},
>> - {0x00,0x00,0x00,0x00,0x00,0x02},
>> - {0x00,0x00,0x00,0x00,0x00,0x03} };
>> + /*u32 TargetContent; */
>> + u32 hwkey[4] = {0, 0, 0, 0};
>> + u8 mask = 0xff;
>> + u32 key_idx = 0;
>> + /*u8 broadcast_addr[6] ={ 0xff,0xff,0xff,0xff,0xff,0xff}; */
> Is this really needed?
>> + u8 zero_addr[4][6] = { {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
>> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
>> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
>> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} };
>> int i;
>>
>> - if(!priv->up) return -ENETDOWN;
>> + if (!priv->up)
>> + return -ENETDOWN;
>>
>> down(&priv->wx_sem);
>>
>> RT_TRACE(COMP_SEC, "Setting SW wep key");
>> - ret = ieee80211_wx_set_encode(priv->ieee80211,info,wrqu,key);
>> + ret = ieee80211_wx_set_encode(priv->ieee80211, info, wrqu, key);
>>
>> up(&priv->wx_sem);
>>
>>
>>
>> - //sometimes, the length is zero while we do not type key value
>> - if(wrqu->encoding.length!=0){
>> + /*sometimes, the length is zero while we do not type key value */
>> + if (wrqu->encoding.length != 0) {
>>
>> - for(i=0 ; i<4 ; i++){
>> + for (i = 0 ; i < 4 ; i++) {
>> hwkey[i] |= key[4*i+0]&mask;
>> - if(i==1&&(4*i+1)==wrqu->encoding.length) mask=0x00;
>> - if(i==3&&(4*i+1)==wrqu->encoding.length) mask=0x00;
>> + if (i == 1 && (4*i+1) == wrqu->encoding.length)
>> + mask = 0x00;
>> + if (i == 3 && (4*i+1) == wrqu->encoding.length)
>> + mask = 0x00;
> this "if" condition like below:
> if (5 == wrqu->encoding.length || 13 == wrqu->encoding.length)
> mask = 0x00;
> and this should be outside "for" loop
>
>> hwkey[i] |= (key[4*i+1]&mask)<<8;
>> hwkey[i] |= (key[4*i+2]&mask)<<16;
>> hwkey[i] |= (key[4*i+3]&mask)<<24;
>> @@ -556,43 +563,54 @@ static int r8192_wx_set_enc(struct net_device *dev,
>> #define CONF_WEP40 0x4
>> #define CONF_WEP104 0x14
>>
>> - switch (wrqu->encoding.flags & IW_ENCODE_INDEX){
>> - case 0: key_idx = ieee->tx_keyidx; break;
>> - case 1: key_idx = 0; break;
>> - case 2: key_idx = 1; break;
>> - case 3: key_idx = 2; break;
>> - case 4: key_idx = 3; break;
>> - default: break;
>> + switch (wrqu->encoding.flags & IW_ENCODE_INDEX) {
>> + case 0:
>> + key_idx = ieee->tx_keyidx;
>> + break;
>> + case 1:
>> + key_idx = 0;
>> + break;
>> + case 2:
>> + key_idx = 1;
>> + break;
>> + case 3:
>> + key_idx = 2;
>> + break;
>> + case 4:
>> + key_idx = 3;
>> + break;
>> + default:
>> + break;
>> }
>>
>> - if(wrqu->encoding.length==0x5){
>> + if (wrqu->encoding.length == 0x5) {
>> ieee->pairwise_key_type = KEY_TYPE_WEP40;
>> EnableHWSecurityConfig8192(dev);
>>
>> - setKey( dev,
>> - key_idx, //EntryNo
>> - key_idx, //KeyIndex
>> - KEY_TYPE_WEP40, //KeyType
>> + setKey(dev,
>> + key_idx, /*EntryNo */
>> + key_idx, /*KeyIndex */
>> + KEY_TYPE_WEP40, /*KeyType */
>> zero_addr[key_idx],
>> - 0, //DefaultKey
>> - hwkey); //KeyContent
>> + 0, /*DefaultKey */
>> + hwkey); /*KeyContent */
>>
>> }
>>
>> - else if(wrqu->encoding.length==0xd){
>> + else if (wrqu->encoding.length == 0xd) {
>> ieee->pairwise_key_type = KEY_TYPE_WEP104;
>> EnableHWSecurityConfig8192(dev);
>>
>> - setKey( dev,
>> - key_idx, //EntryNo
>> - key_idx, //KeyIndex
>> - KEY_TYPE_WEP104, //KeyType
>> + setKey(dev,
>> + key_idx, /*EntryNo */
>> + key_idx, /*KeyIndex */
>> + KEY_TYPE_WEP104, /*KeyType */
>> zero_addr[key_idx],
>> - 0, //DefaultKey
>> - hwkey); //KeyContent
>> + 0, /*DefaultKey */
>> + hwkey); /*KeyContent */
>>
>> - }
>> - else printk("wrong type in WEP, not WEP40 and WEP104\n");
>> + } else
>> + printk("wrong type in WEP, not WEP40 and WEP104\n");
>>
>> }
>>
>> @@ -600,12 +618,12 @@ static int r8192_wx_set_enc(struct net_device *dev,
>> }
>>
>>
>> -static int r8192_wx_set_scan_type(struct net_device *dev, struct
>> iw_request_info *aa, union
>> - iwreq_data *wrqu, char *p){
>> +static int r8192_wx_set_scan_type(struct net_device *dev, struct
>> iw_request_info *aa,
>> + union iwreq_data *wrqu, char *p){
>>
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> - int *parms=(int *)p;
>> - int mode=parms[0];
>> + int *parms = (int *)p;
>> + int mode = parms[0];
>>
>> priv->ieee80211->active_scan = mode;
>>
>> @@ -624,24 +642,24 @@ static int r8192_wx_set_retry(struct net_device *dev,
>> down(&priv->wx_sem);
>>
>> if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
>> - wrqu->retry.disabled){
>> + wrqu->retry.disabled) {
>> err = -EINVAL;
>> goto exit;
>> }
>> - if (!(wrqu->retry.flags & IW_RETRY_LIMIT)){
>> + if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) {
>> err = -EINVAL;
>> goto exit;
>> }
>>
>> - if(wrqu->retry.value > R8180_MAX_RETRY){
>> - err= -EINVAL;
>> + if (wrqu->retry.value > R8180_MAX_RETRY) {
>> + err = -EINVAL;
>> goto exit;
>> }
>> if (wrqu->retry.flags & IW_RETRY_MAX) {
>> priv->retry_rts = wrqu->retry.value;
>> DMESG("Setting retry for RTS/CTS data to %d",
>> wrqu->retry.value);
>>
>> - }else {
>> + } else {
>> priv->retry_data = wrqu->retry.value;
>> DMESG("Setting retry for non RTS/CTS data to %d",
>> wrqu->retry.value);
>> }
>> @@ -687,7 +705,7 @@ static int r8192_wx_get_retry(struct net_device *dev,
>> wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
>> wrqu->retry.value = priv->retry_data;
>> }
>> - //printk("returning %d",wrqu->retry.value);
>> + /* printk("returning %d",wrqu->retry.value); */
>>
>>
>> return 0;
>> @@ -698,7 +716,8 @@ static int r8192_wx_get_sens(struct net_device *dev,
>> union iwreq_data *wrqu, char *extra)
>> {
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> - if(priv->rf_set_sens == NULL)
>> +
>> + if (priv->rf_set_sens == NULL)
>> return -1; /* we have not this support for this radio */
>> wrqu->sens.value = priv->sens;
>> return 0;
>> @@ -714,15 +733,15 @@ static int r8192_wx_set_sens(struct net_device *dev,
>>
>> short err = 0;
>> down(&priv->wx_sem);
>> - //DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);
>> - if(priv->rf_set_sens == NULL) {
>> - err= -1; /* we have not this support for this radio */
>> + /*DMESG("attempt to set sensivity to %ddb",wrqu->sens.value);*/
>> + if (priv->rf_set_sens == NULL) {
>> + err = -1; /* we have not this support for this radio */
>> goto exit;
>> }
>> - if(priv->rf_set_sens(dev, wrqu->sens.value) == 0)
>> + if (priv->rf_set_sens(dev, wrqu->sens.value) == 0)
>> priv->sens = wrqu->sens.value;
>> else
>> - err= -EINVAL;
>> + err = -EINVAL;
>>
>> exit:
>> up(&priv->wx_sem);
>> @@ -730,77 +749,72 @@ exit:
>> return err;
>> }
>>
>> -//hw security need to reorganized.
>> +/*hw security need to reorganized. */
>> static int r8192_wx_set_enc_ext(struct net_device *dev,
>> struct iw_request_info *info,
>> union iwreq_data *wrqu, char *extra)
>> {
>> - int ret=0;
>> + int ret = 0;
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> struct ieee80211_device *ieee = priv->ieee80211;
>> - //printk("===>%s()\n", __func__);
>> +
>> + /* printk("===>%s()\n", __func__); */
> this line can be removed.
>>
>>
>> down(&priv->wx_sem);
>> ret = ieee80211_wx_set_encode_ext(priv->ieee80211, info, wrqu,
>> extra);
>>
>> {
>> - u8 broadcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
>> + u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
>> u8 zero[6] = {0};
>> u32 key[4] = {0};
>> struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
>> struct iw_point *encoding = &wrqu->encoding;
>> u8 idx = 0, alg = 0, group = 0;
>> if ((encoding->flags & IW_ENCODE_DISABLED) ||
>> - ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use
>> hwsec WB 2008.07.01
>> + ext->alg == IW_ENCODE_ALG_NONE) /*none is not allowed to use
>> hwsec WB 2008.07.01 */
> over 80 character.
>> goto end_hw_sec;
>>
>> - alg = (ext->alg ==
>> IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; // as IW_ENCODE_ALG_CCMP is
>> defined to be 3 and KEY_TYPE_CCMP is defined to 4;
>> + alg = (ext->alg ==
>> IW_ENCODE_ALG_CCMP)?KEY_TYPE_CCMP:ext->alg; /* as IW_ENCODE_ALG_CCMP is
>> defined to be 3 and KEY_TYPE_CCMP is defined to 4; */
> over 80 character in a line.
>
>> idx = encoding->flags & IW_ENCODE_INDEX;
>> if (idx)
>> - idx --;
>> + idx--;
>> group = ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY;
>>
>> - if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg ==
>> KEY_TYPE_WEP40))
>> - {
>> - if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40) )
>> + if ((!group) || (IW_MODE_ADHOC == ieee->iw_mode) || (alg ==
>> KEY_TYPE_WEP40)) {
>> + if ((ext->key_len == 13) && (alg == KEY_TYPE_WEP40))
>> alg = KEY_TYPE_WEP104;
>> ieee->pairwise_key_type = alg;
>> EnableHWSecurityConfig8192(dev);
>> }
>> - memcpy((u8 *)key, ext->key, 16); //we only get 16 bytes
>> key.why? WB 2008.7.1
>> -
>> - if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode !=2) )
>> - {
>> -
>> - setKey( dev,
>> - idx,//EntryNo
>> - idx, //KeyIndex
>> - alg, //KeyType
>> - zero, //MacAddr
>> - 0, //DefaultKey
>> - key); //KeyContent
>> - }
>> - else if (group)
>> - {
>> + memcpy((u8 *)key, ext->key, 16); /*we only get 16 bytes
>> key.why? WB 2008.7.1 */
>> +
>> + if ((alg & KEY_TYPE_WEP40) && (ieee->auth_mode != 2)) {
>> +
>> + setKey(dev,
>> + idx,/*EntryNo */
>> + idx, /*KeyIndex */
>> + alg, /*KeyType */
>> + zero, /*MacAddr */
>> + 0, /*DefaultKey */
>> + key); /*KeyContent */
>> + } else if (group) {
>> ieee->group_key_type = alg;
>> - setKey( dev,
>> - idx,//EntryNo
>> - idx, //KeyIndex
>> - alg, //KeyType
>> - broadcast_addr, //MacAddr
>> - 0, //DefaultKey
>> - key); //KeyContent
>> - }
>> - else //pairwise key
>> - {
>> - setKey( dev,
>> - 4,//EntryNo
>> - idx, //KeyIndex
>> - alg, //KeyType
>> - (u8 *)ieee->ap_mac_addr, //MacAddr
>> - 0, //DefaultKey
>> - key); //KeyContent
>> + setKey(dev,
>> + idx,/*EntryNo */
>> + idx, /*KeyIndex */
>> + alg, /*KeyType */
>> + broadcast_addr, /*MacAddr */
>> + 0, /*DefaultKey */
>> + key); /*KeyContent */
>> + } else /*pairwise key */ {
>> + setKey(dev,
>> + 4,/*EntryNo */
>> + idx, /*KeyIndex */
>> + alg, /*KeyType */
>> + (u8 *)ieee->ap_mac_addr, /*MacAddr */
>> + 0, /*DefaultKey */
>> + key); /*KeyContent */
>> }
>>
>>
>> @@ -816,9 +830,10 @@ static int r8192_wx_set_auth(struct net_device *dev,
>> struct iw_request_info *info,
>> union iwreq_data *data, char *extra)
>> {
>> - int ret=0;
>> - //printk("====>%s()\n", __func__);
>> + int ret = 0;
>> + /*printk("====>%s()\n", __func__); */
> remove.
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> +
>> down(&priv->wx_sem);
>> ret = ieee80211_wx_set_auth(priv->ieee80211, info, &(data->param),
>> extra);
>> up(&priv->wx_sem);
>> @@ -829,10 +844,11 @@ static int r8192_wx_set_mlme(struct net_device *dev,
>> struct iw_request_info *info,
>> union iwreq_data *wrqu, char *extra)
>> {
>> - //printk("====>%s()\n", __func__);
>> + /*printk("====>%s()\n", __func__); */
> remove.
>>
>> - int ret=0;
>> + int ret = 0;
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> +
>> down(&priv->wx_sem);
>> ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
>>
>> @@ -844,27 +860,27 @@ static int r8192_wx_set_gen_ie(struct net_device *dev,
>> struct iw_request_info *info,
>> union iwreq_data *data, char *extra)
>> {
>> - //printk("====>%s(), len:%d\n", __func__, data->length);
>> - int ret=0;
>> + /*printk("====>%s(), len:%d\n", __func__, data->length); */
> remove.
>> + int ret = 0;
>> struct r8192_priv *priv = ieee80211_priv(dev);
>> +
>> down(&priv->wx_sem);
>> ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra,
>> data->data.length);
>> up(&priv->wx_sem);
>> - //printk("<======%s(), ret:%d\n", __func__, ret);
>> + /*printk("<======%s(), ret:%d\n", __func__, ret); */
> remove this.
>> return ret;
>>
>>
>> }
>>
>> static int dummy(struct net_device *dev, struct iw_request_info *a,
>> - union iwreq_data *wrqu,char *b)
>> + union iwreq_data *wrqu, char *b)
>> {
>> return -1;
>> }
>>
>>
>> -static iw_handler r8192_wx_handlers[] =
>> -{
>> +static iw_handler r8192_wx_handlers[] = {
>> NULL, /* SIOCSIWCOMMIT */
>> r8192_wx_get_name, /* SIOCGIWNAME */
>> dummy, /* SIOCSIWNWID */
>> @@ -913,13 +929,13 @@ static iw_handler r8192_wx_handlers[] =
>> r8192_wx_get_power, /* SIOCGIWPOWER */
>> NULL, /*---hole---*/
>> NULL, /*---hole---*/
>> - r8192_wx_set_gen_ie,//NULL, /* SIOCSIWGENIE */
>> + r8192_wx_set_gen_ie,/*NULL, */ /* SIOCSIWGENIE */
>> NULL, /* SIOCSIWGENIE */
>>
>> - r8192_wx_set_auth,//NULL, /* SIOCSIWAUTH */
>> - NULL,//r8192_wx_get_auth,//NULL, /*
>> SIOCSIWAUTH */
>> + r8192_wx_set_auth,/*NULL, */ /* SIOCSIWAUTH */
>> + NULL,/*r8192_wx_get_auth,*//*NULL,*/ /*
>> SIOCSIWAUTH */
>> r8192_wx_set_enc_ext, /* SIOCSIWENCODEEXT */
>> - NULL,//r8192_wx_get_enc_ext,//NULL, /*
>> SIOCSIWENCODEEXT */
>> + NULL,/*r8192_wx_get_enc_ext,*//*NULL,*/ /*
>> SIOCSIWENCODEEXT */
>> NULL, /* SIOCSIWPMKSA */
>> NULL, /*---hole---*/
>>
>> @@ -952,27 +968,26 @@ static const struct iw_priv_args r8192_private_args[]
>> = {
>>
>>
>> static iw_handler r8192_private_handler[] = {
>> -// r8192_wx_set_monitor, /* SIOCIWFIRSTPRIV */
>> +/* r8192_wx_set_monitor, *//* SIOCIWFIRSTPRIV */
>> r8192_wx_set_crcmon, /*SIOCIWSECONDPRIV*/
>> -// r8192_wx_set_forceassociate,
>> -// r8192_wx_set_beaconinterval,
>> -// r8192_wx_set_monitor_type,
>> +/* r8192_wx_set_forceassociate, */
>> +/* r8192_wx_set_beaconinterval, */
>> +/* r8192_wx_set_monitor_type, */
>> r8192_wx_set_scan_type,
>> r8192_wx_set_rawtx,
>> - //r8192_wx_null,
>> + /*r8192_wx_null, */
>> r8192_wx_force_reset,
>> };
>>
>> struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
>> {
>> - struct r8192_priv *priv = ieee80211_priv(dev);
>> + struct r8192_priv *priv = ieee80211_priv(dev);
>> struct ieee80211_device *ieee = priv->ieee80211;
>> struct iw_statistics *wstats = &priv->wstats;
>> int tmp_level = 0;
>> int tmp_qual = 0;
>> int tmp_noise = 0;
>> - if(ieee->state < IEEE80211_LINKED)
>> - {
>> + if (ieee->state < IEEE80211_LINKED) {
>> wstats->qual.qual = 0;
>> wstats->qual.level = 0;
>> wstats->qual.noise = 0;
>> @@ -980,20 +995,20 @@ struct iw_statistics *r8192_get_wireless_stats(struct
>> net_device *dev)
>> return wstats;
>> }
>>
>> - tmp_level = (&ieee->current_network)->stats.rssi;
>> + tmp_level = (&ieee->current_network)->stats.rssi;
>> tmp_qual = (&ieee->current_network)->stats.signal;
>> tmp_noise = (&ieee->current_network)->stats.noise;
>> - //printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual,
>> tmp_noise);
>> + /*printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual,
>> tmp_noise); */
>>
>> wstats->qual.level = tmp_level;
>> wstats->qual.qual = tmp_qual;
>> wstats->qual.noise = tmp_noise;
>> - wstats->qual.updated = IW_QUAL_ALL_UPDATED| IW_QUAL_DBM;
>> + wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
>> return wstats;
>> }
>>
>>
>> -struct iw_handler_def r8192_wx_handlers_def={
>> +struct iw_handler_def r8192_wx_handlers_def = {
>> .standard = r8192_wx_handlers,
>> .num_standard = ARRAY_SIZE(r8192_wx_handlers),
>> .private = r8192_private_handler,
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
