The patch adds backlight support to s6e8aa0 panel.

Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
---
 drivers/gpu/drm/panel/Kconfig         |  2 ++
 drivers/gpu/drm/panel/panel-s6e8aa0.c | 50 +++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 4ec874d..a54d89b 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -29,5 +29,7 @@ config DRM_PANEL_S6E8AA0
        depends on OF
        select DRM_MIPI_DSI
        select VIDEOMODE_HELPERS
+       select BACKLIGHT_LCD_SUPPORT
+       select BACKLIGHT_CLASS_DEVICE
 
 endmenu
diff --git a/drivers/gpu/drm/panel/panel-s6e8aa0.c 
b/drivers/gpu/drm/panel/panel-s6e8aa0.c
index 35941d2..98a59a7 100644
--- a/drivers/gpu/drm/panel/panel-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-s6e8aa0.c
@@ -19,6 +19,7 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
 
+#include <linux/backlight.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 
@@ -91,6 +92,8 @@ struct s6e8aa0_variant {
        const s6e8aa0_gamma_table *gamma_tables;
 };
 
+#define S6E8AA0_STATE_BIT_ENABLED      0
+
 struct s6e8aa0 {
        struct device *dev;
        struct drm_panel panel;
@@ -106,6 +109,7 @@ struct s6e8aa0 {
        u32 width_mm;
        u32 height_mm;
 
+       unsigned long state;
        u8 version;
        u8 id;
        const struct s6e8aa0_variant *variant;
@@ -890,6 +894,7 @@ static int s6e8aa0_disable(struct drm_panel *panel)
 {
        struct s6e8aa0 *ctx = panel_to_s6e8aa0(panel);
 
+       clear_bit(S6E8AA0_STATE_BIT_ENABLED, &ctx->state);
        s6e8aa0_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE);
        s6e8aa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_OFF);
        msleep(40);
@@ -913,6 +918,8 @@ static int s6e8aa0_enable(struct drm_panel *panel)
 
        if (ret < 0)
                s6e8aa0_disable(panel);
+       else
+               set_bit(S6E8AA0_STATE_BIT_ENABLED, &ctx->state);
 
        return ret;
 }
@@ -947,6 +954,47 @@ static const struct drm_panel_funcs s6e8aa0_drm_funcs = {
        .get_modes = s6e8aa0_get_modes,
 };
 
+static int s6e8aa0_get_brightness(struct backlight_device *bd)
+{
+       return bd->props.brightness;
+}
+
+static int s6e8aa0_set_brightness(struct backlight_device *bd)
+{
+       struct s6e8aa0 *ctx = bl_get_data(bd);
+
+       bd->props.power = FB_BLANK_UNBLANK;
+       if (ctx->brightness != bd->props.brightness) {
+               ctx->brightness = bd->props.brightness;
+               if (test_bit(S6E8AA0_STATE_BIT_ENABLED, &ctx->state))
+                       s6e8aa0_brightness_set(ctx);
+       }
+
+       return s6e8aa0_clear_error(ctx);
+}
+
+static const struct backlight_ops s6e8aa0_backlight_ops = {
+       .get_brightness = s6e8aa0_get_brightness,
+       .update_status = s6e8aa0_set_brightness,
+};
+
+static void s6e8aa0_backlight_register(struct s6e8aa0 *ctx)
+{
+       struct backlight_properties props = {
+               .type = BACKLIGHT_RAW,
+               .brightness = ctx->brightness,
+               .max_brightness = GAMMA_LEVEL_NUM - 1
+       };
+       struct device *dev = ctx->dev;
+       struct backlight_device *bd;
+
+       bd = devm_backlight_device_register(dev, "s6e8aa0-bl", dev, ctx,
+                                           &s6e8aa0_backlight_ops, &props);
+       if (IS_ERR(bd))
+               dev_err(dev, "error registering backlight device (%ld)\n",
+                       PTR_ERR(bd));
+}
+
 static int s6e8aa0_parse_dt(struct s6e8aa0 *ctx)
 {
        struct device *dev = ctx->dev;
@@ -1029,6 +1077,8 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
        if (ret < 0)
                drm_panel_remove(&ctx->panel);
 
+       s6e8aa0_backlight_register(ctx);
+
        return ret;
 }
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to