3.11.10.11 -stable review patch. If anyone has any objections, please let me
know.
------------------
From: Nikita Yushchenko <nyushche...@dev.rtsoft.ru>
commit d183c81929beeba842b74422f754446ef2b8b49c upstream.
Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller
present in these SoCs has bit 17 of USBx_CONTROL register marked as
Reserved - there is no PHY_CLK_VALID bit there.
Testing for this bit in ehci_fsl_setup_phy() behaves differently on two
P1020RDB boards available here - on one board test passes and fsl-usb
init succeeds, but on other board test fails, causing fsl-usb init to
fail.
This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on
controller version 1.6 that (per manual) does not have this bit.
Signed-off-by: Nikita Yushchenko <nyushche...@dev.rtsoft.ru>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriq...@canonical.com>
---
drivers/usb/host/ehci-fsl.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 87c1a2efba4f..164e3816f16b 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -261,7 +261,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
break;
}
- if (pdata->have_sysif_regs && pdata->controller_ver &&
+ if (pdata->have_sysif_regs &&
+ pdata->controller_ver > FSL_USB_VER_1_6 &&
(phy_mode == FSL_USB2_PHY_ULPI)) {
/* check PHY_CLK_VALID to get phy clk valid */
if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
