All channels' single measurement are happening on CH 0. So enabling / disabling the divider once is not enough, because it has impact on all channels.
Set only a flag, then check this on each measurement, and enable / disable the divider as required. Signed-off-by: Robert Hodaszi <[email protected]> --- drivers/staging/iio/adc/mxs-lradc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index dae8d1a..52d7517 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -846,6 +846,14 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) LRADC_CTRL1); mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); + /* Enable / disable the divider per requirement */ + if (test_bit(chan, &lradc->is_divided)) + mxs_lradc_reg_set(lradc, 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + else + mxs_lradc_reg_clear(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, LRADC_CTRL2); + /* Clean the slot's previous content, then set new one. */ mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), LRADC_CTRL4); @@ -961,15 +969,11 @@ static int mxs_lradc_write_raw(struct iio_dev *iio_dev, if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { /* divider by two disabled */ - writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_CLR); clear_bit(chan->channel, &lradc->is_divided); ret = 0; } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { /* divider by two enabled */ - writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_SET); set_bit(chan->channel, &lradc->is_divided); ret = 0; } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
