> On 06/16/2014 11:23 AM, Peter Griffin wrote: > >This patch fixes two problems: - > > > >1) The device tree isn't currently providing sti-ethclk which is > >required by the dwmac glue code to correctly configure the ethernet > >PHY clock speed. > > > >This means depending on what the bootloader/jtag has > >configured this clock to, and what switch/hub the board is plugged > >into you most likely will NOT successfully negotiate a ethernet link. > > > >2) The stmmaceth clock was associated with the wrong clock. It was > >referencing the PHY clock rather than the interconnect clock which > >clocks the IP. > > > >This patch also brings us closer to not having to boot the upstream > >kernel with the clk_ignore_unused parameter. > > > >Signed-off-by: Peter Griffin <[email protected]> > >--- > > arch/arm/boot/dts/stih415.dtsi | 8 ++++---- > > arch/arm/boot/dts/stih416.dtsi | 8 ++++---- > > include/dt-bindings/clock/stih415-clks.h | 1 + > > include/dt-bindings/clock/stih416-clks.h | 1 + > > 4 files changed, 10 insertions(+), 8 deletions(-) > > Acked-by: Maxime Coquelin <[email protected]> > > Thanks for the fix!
Can you apply Maxime and my Acks and send to ARM-SoC (CC'ed), due for their -fixes branch please? -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
