This patch puts KERN_ constants in printk()'s and makes the debugging printk()'s
more consistent in drivers/acorn/block/mfmhd.c
Signed-off-by: James Nelson <[EMAIL PROTECTED]>
Signed-off-by: Domen Puncer <[EMAIL PROTECTED]>
---
kj-domen/drivers/acorn/block/mfmhd.c | 151 +++++++++++++++--------------------
1 files changed, 66 insertions(+), 85 deletions(-)
diff -puN drivers/acorn/block/mfmhd.c~printk-drivers_acorn_block_mfmhd
drivers/acorn/block/mfmhd.c
--- kj/drivers/acorn/block/mfmhd.c~printk-drivers_acorn_block_mfmhd
2005-03-05 16:11:44.000000000 +0100
+++ kj-domen/drivers/acorn/block/mfmhd.c 2005-03-05 16:11:44.000000000
+0100
@@ -98,6 +98,8 @@
* This would be a performance boost with dual drive systems.
*/
+#undef DEBUG /* define to enable debugging statements */
+
#include <linux/module.h>
#include <linux/config.h>
#include <linux/sched.h>
@@ -126,6 +128,7 @@ static void (*do_mfm)(void) = NULL;
static struct request_queue *mfm_queue;
static DEFINE_SPINLOCK(mfm_lock);
+#define PFX "mfm: "
#define MAJOR_NR MFM_ACORN_MAJOR
#define QUEUE (mfm_queue)
#define CURRENT elv_next_request(mfm_queue)
@@ -153,12 +156,7 @@ struct hd_geometry {
* Linux I/O address of onboard MFM controller or 0 to disable this
*/
#define ONBOARD_MFM_ADDRESS ((0x002d0000 >> 2) | 0x80000000)
-/*
- * Uncomment this to enable debugging in the MFM driver...
- */
-#ifndef DEBUG
-/*#define DEBUG */
-#endif
+
/*
* End of configuration
*/
@@ -300,28 +298,8 @@ int number_mfm_drives = 1;
#define STAT_POL 0x0200 /* Polling */
/*
------------------------------------------------------------------------------------------
*/
-#ifdef DEBUG
-static void console_printf(const char *fmt,...)
-{
- static char buffer[2048]; /* Arbitary! */
- extern void console_print(const char *);
- unsigned long flags;
- va_list ap;
-
- local_irq_save(flags);
-
- va_start(ap, fmt);
- vsprintf(buffer, fmt, ap);
- console_print(buffer);
- va_end(fmt);
- local_irq_restore(flags);
-}; /* console_printf */
-
-#define DBG(x...) console_printf(x)
-#else
-#define DBG(x...)
-#endif
+#define DBG(fmt, args...) pr_debug(PFX "%s(): " fmt, __FUNCTION__ , ## args)
static void print_status(void)
{
@@ -377,23 +355,23 @@ static void issue_command(int command, u
int status;
#ifdef DEBUG
int i;
- console_printf("issue_command: %02X: ", command);
+ DBG("%02X:", command);
for (i = 0; i < len; i++)
- console_printf("%02X ", cmdb[i]);
- console_printf("\n");
+ printk(" %02X", cmdb[i]);
+ printk("\n");
#endif
do {
status = inw(MFM_STATUS);
} while (status & (STAT_BSY | STAT_POL));
- DBG("issue_command: status after pol/bsy loop: %02X:\n ", status >> 8);
+ DBG("status after pol/bsy loop: %02X:\n", status >> 8);
if (status & (STAT_CPR | STAT_CED | STAT_SED | STAT_DER | STAT_ABN)) {
outw(CMD_RCAL, MFM_COMMAND);
while (inw(MFM_STATUS) & STAT_BSY);
}
status = inw(MFM_STATUS);
- DBG("issue_command: status before parameter issue: %02X:\n ", status >>
8);
+ DBG("status before parameter issue: %02X:\n", status >> 8);
while (len > 0) {
outw(cmdb[1] | (cmdb[0] << 8), MFM_DATAOUT);
@@ -401,11 +379,11 @@ static void issue_command(int command, u
cmdb += 2;
}
status = inw(MFM_STATUS);
- DBG("issue_command: status before command issue: %02X:\n ", status >>
8);
+ DBG("status before command issue: %02X:\n", status >> 8);
outw(command, MFM_COMMAND);
status = inw(MFM_STATUS);
- DBG("issue_command: status immediately after command issue: %02X:\n ",
status >> 8);
+ DBG("status immediately after command issue: %02X:\n", status >> 8);
}
static void wait_for_completion(void)
@@ -434,7 +412,7 @@ static void mfm_rw_intr(void)
{
int old_status; /* Holds status on entry, we read to see if the
command just finished */
#ifdef DEBUG
- console_printf("mfm_rw_intr...dataleft=%d\n", hdc63463_dataleft);
+ DBG("dataleft=%d ", hdc63463_dataleft);
print_status();
#endif
@@ -443,7 +421,7 @@ static void mfm_rw_intr(void)
/* Something has gone wrong - let's try that again */
outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
if (cont) {
- DBG("mfm_rw_intr: DER/ABN err\n");
+ DBG("DER/ABN err\n");
cont->error();
cont->redo();
};
@@ -457,7 +435,7 @@ static void mfm_rw_intr(void)
if (CURRENT->cmd == WRITE) {
extern void hdc63463_writedma(void);
if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
- printk("mfm_rw_intr: Apparent DMA write request when no
more to DMA\n");
+ printk(KERN_WARNING PFX "mfm_rw_intr: Apparent DMA
write request when no more to DMA\n");
if (cont) {
cont->error();
cont->redo();
@@ -468,7 +446,7 @@ static void mfm_rw_intr(void)
} else {
extern void hdc63463_readdma(void);
if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
- printk("mfm_rw_intr: Apparent DMA read request when no
more to DMA\n");
+ printk(KERN_WARNING PFX "mfm_rw_intr: Apparent DMA read
request when no more to DMA\n");
if (cont) {
cont->error();
cont->redo();
@@ -482,7 +460,7 @@ static void mfm_rw_intr(void)
if (hdc63463_dataptr != ((unsigned int) Copy_buffer + 256)) {
/* If we didn't actually manage to get any data on this
interrupt - but why? We got the interrupt */
/* Ah - well looking at the status its just when we get command
end; so no problem */
- /*console_printf("mfm: dataptr mismatch. dataptr=0x%08x
Copy_buffer+256=0x%08p\n",
+ /*DBG("dataptr mismatch. dataptr=0x%08x Copy_buffer+256=0x%08p
",
hdc63463_dataptr,Copy_buffer+256);
print_status(); */
} else {
@@ -492,7 +470,7 @@ static void mfm_rw_intr(void)
/* We have come to the end of this request */
if (!Sectors256LeftInCurrent) {
- DBG("mfm: end_request for CURRENT=0x%p
CURRENT(sector=%d current_nr_sectors=%d nr_sectors=%d)\n",
+ DBG("end_request for CURRENT=0x%p CURRENT(sector=%d
current_nr_sectors=%d nr_sectors=%d)\n",
CURRENT, CURRENT->sector,
CURRENT->current_nr_sectors, CURRENT->nr_sectors);
CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
@@ -511,10 +489,10 @@ static void mfm_rw_intr(void)
if (Copy_Sector != CURRENT->sector * 2)
#ifdef DEBUG
- /*console_printf*/printk("mfm:
Copy_Sector mismatch. Copy_Sector=%d CURRENT->sector*2=%d\n",
+ DBG("Copy_Sector mismatch.
Copy_Sector=%d CURRENT->sector*2=%d\n",
Copy_Sector, CURRENT->sector * 2);
#else
- printk("mfm: Copy_Sector mismatch!
Eek!\n");
+ printk(KERN_ERR PFX "Copy_Sector
mismatch! Eek!\n");
#endif
}; /* CURRENT */
}; /* Sectors256LeftInCurrent */
@@ -525,7 +503,7 @@ static void mfm_rw_intr(void)
if (mfm_status & (STAT_DER | STAT_ABN)) {
/* Something has gone wrong - let's try that again */
if (cont) {
- DBG("mfm_rw_intr: DER/ABN error\n");
+ DBG("DER/ABN error\n");
cont->error();
cont->redo();
};
@@ -547,7 +525,7 @@ static void mfm_rw_intr(void)
};
}; /* Result read */
- /*console_printf ("mfm_rw_intr nearexit [%02X]\n",
__raw_readb(mfm_IRQPollLoc)); */
+ /*DBG("nearexit [%02X]\n", __raw_readb(mfm_IRQPollLoc)); */
/* If end of command move on */
if (mfm_status & (STAT_CED)) {
@@ -556,7 +534,7 @@ static void mfm_rw_intr(void)
if (cont) {
cont->done(1);
}
- DBG("mfm_rw_intr: returned from cont->done\n");
+ DBG("returned from cont->done\n");
} else {
/* Its going to generate another interrupt */
do_mfm = mfm_rw_intr;
@@ -565,7 +543,7 @@ static void mfm_rw_intr(void)
static void mfm_setup_rw(void)
{
- DBG("setting up for rw...\n");
+ DBG("start\n");
do_mfm = mfm_rw_intr;
issue_command(raw_cmd.cmdcode, raw_cmd.cmddata, raw_cmd.cmdlen);
@@ -574,12 +552,12 @@ static void mfm_setup_rw(void)
static void mfm_recal_intr(void)
{
#ifdef DEBUG
- console_printf("recal intr - status = ");
+ DBG("status = ");
print_status();
#endif
outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
if (mfm_status & (STAT_DER | STAT_ABN)) {
- printk("recal failed\n");
+ printk(KERN_ERR PFX "recal failed\n");
MFM_DRV_INFO.cylinder = NEED_2_RECAL;
if (cont) {
cont->error();
@@ -601,18 +579,18 @@ static void mfm_recal_intr(void)
issue_command(CMD_POL, NULL, 0);
return;
}
- printk("recal: unknown status\n");
+ printk(KERN_ERR PFX "recal: unknown status\n");
}
static void mfm_seek_intr(void)
{
#ifdef DEBUG
- console_printf("seek intr - status = ");
+ DBG("status = ");
print_status();
#endif
outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
if (mfm_status & (STAT_DER | STAT_ABN)) {
- printk("seek failed\n");
+ printk(KERN_ERR PFX "seek failed\n");
MFM_DRV_INFO.cylinder = NEED_2_RECAL;
if (cont) {
cont->error();
@@ -631,7 +609,7 @@ static void mfm_seek_intr(void)
issue_command(CMD_POL, NULL, 0);
return;
}
- printk("seek: unknown status\n");
+ printk(KERN_ERR PFX "seek: unknown status\n");
}
/* IDEA2 seems to work better - its what RiscOS sets my
@@ -686,7 +664,7 @@ static void mfm_seek(void)
DBG("seeking...\n");
if (MFM_DRV_INFO.cylinder < 0) {
do_mfm = mfm_recal_intr;
- DBG("mfm_seek: about to call specify\n");
+ DBG("about to call specify\n");
mfm_specify (); /* DAG added this */
cmdb[0] = raw_cmd.dev + 1;
@@ -709,19 +687,20 @@ static void mfm_seek(void)
static void mfm_initialise(void)
{
- DBG("init...\n");
+ DBG("start\n");
mfm_seek();
}
static void request_done(int uptodate)
{
- DBG("mfm:request_done\n");
+ DBG("start\n");
if (uptodate) {
unsigned char block[2] = {0, 0};
/* Apparently worked - let's check bytes left to DMA */
if (hdc63463_dataleft != (PartFragRead_SectorsLeft * 256)) {
- printk("mfm: request_done - dataleft=%d - should be %d
- Eek!\n", hdc63463_dataleft, PartFragRead_SectorsLeft * 256);
+ printk(KERN_ERR PFX "request_done - dataleft=%d -
should be %d - Eek!\n",
+ hdc63463_dataleft, PartFragRead_SectorsLeft *
256);
end_request(CURRENT, 0);
Busy = 0;
};
@@ -740,7 +719,8 @@ static void request_done(int uptodate)
/* ah well - perhaps there is another fragment to go */
/* Increment pointers/counts to start of next fragment */
- if (SectorsLeftInRequest > 0) printk("mfm:
SectorsLeftInRequest>0 - Eek! Shouldn't happen!\n");
+ if (SectorsLeftInRequest > 0)
+ printk(KERN_CRIT PFX "SectorsLeftInRequest > 0 - Eek!
Shouldn't happen!\n");
/* No - its the end of the line */
/* end_request's should have happened at the end of sector DMAs
*/
@@ -749,12 +729,12 @@ static void request_done(int uptodate)
issue_command(CMD_CKV, block, 2);
Busy = 0;
- DBG("request_done: About to mfm_request\n");
+ DBG("About to mfm_request\n");
/* Next one please */
mfm_request(); /* Moved from mfm_rw_intr */
- DBG("request_done: returned from mfm_request\n");
+ DBG("returned from mfm_request\n");
} else {
- printk("mfm:request_done: update=0\n");
+ DBG("update=0\n");
end_request(CURRENT, 0);
Busy = 0;
}
@@ -762,7 +742,7 @@ static void request_done(int uptodate)
static void error_handler(void)
{
- printk("error detected... status = ");
+ printk(KERN_ERR PFX "error detected... status = ");
print_status();
(*errors)++;
if (*errors > MFM_DRV_INFO.errors.abort)
@@ -773,7 +753,7 @@ static void error_handler(void)
static void rw_interrupt(void)
{
- printk("rw_interrupt\n");
+ DBG("start\n");
}
static struct cont rw_cont =
@@ -807,7 +787,7 @@ static void issue_request(unsigned int b
/* Then add in the number of sectors left on this track */
sectors_to_next_cyl += (p->sectors - start_sector);
- DBG("issue_request: mfm_info[dev].sectors=%d track=%d\n", p->sectors,
track);
+ DBG("mfm_info[dev].sectors=%d track=%d\n", p->sectors, track);
raw_cmd.dev = dev;
raw_cmd.sector = start_sector;
@@ -869,7 +849,7 @@ static void issue_request(unsigned int b
*/
static void mfm_rerequest(void)
{
- DBG("mfm_rerequest\n");
+ DBG("start\n");
cli();
Busy = 0;
mfm_request();
@@ -879,12 +859,12 @@ static struct gendisk *mfm_gendisk[2];
static void mfm_request(void)
{
- DBG("mfm_request CURRENT=%p Busy=%d\n", CURRENT, Busy);
+ DBG("CURRENT=%p Busy=%d\n", CURRENT, Busy);
/* If we are still processing then return; we will get called again */
if (Busy) {
/* Again seems to be common in 1.3.45 */
- /*DBG*/printk("mfm_request: Exiting due to busy\n");
+ DBG("Exiting due to busy\n");
return;
}
Busy = 1;
@@ -893,28 +873,28 @@ static void mfm_request(void)
unsigned int block, nsect;
struct gendisk *disk;
- DBG("mfm_request: loop start\n");
+ DBG("loop start\n");
sti();
- DBG("mfm_request: before !CURRENT\n");
+ DBG("before !CURRENT\n");
if (!CURRENT) {
- printk("mfm_request: Exiting due to empty queue
(pre)\n");
+ DBG("Exiting due to empty queue (pre)\n");
do_mfm = NULL;
Busy = 0;
return;
}
- DBG("mfm_request: before arg extraction\n");
+ DBG("before arg extraction\n");
disk = CURRENT->rq_disk;
block = CURRENT->sector;
nsect = CURRENT->nr_sectors;
if (block >= get_capacity(disk) ||
block+nsect > get_capacity(disk)) {
- printk("%s: bad access: block=%d, count=%d,
nr_sects=%ld\n",
+ printk(KERN_ERR "%s: bad access: block=%d, count=%d,
nr_sects=%ld\n",
disk->disk_name, block, nsect,
get_capacity(disk));
- printk("mfm: continue 1\n");
+ DBG("continue 1\n");
end_request(CURRENT, 0);
Busy = 0;
continue;
@@ -930,25 +910,25 @@ static void mfm_request(void)
Copy_buffer = CURRENT->buffer;
Copy_Sector = CURRENT->sector << 1;
- DBG("mfm_request: block after offset=%d\n", block);
+ DBG("block after offset=%d\n", block);
if (CURRENT->cmd != READ && CURRENT->cmd != WRITE) {
- printk("unknown mfm-command %d\n", CURRENT->cmd);
+ printk(KERN_ERR "unknown mfm-command %d\n",
CURRENT->cmd);
end_request(CURRENT, 0);
Busy = 0;
- printk("mfm: continue 4\n");
+ DBG("continue 4\n");
continue;
}
issue_request(block, nsect, CURRENT);
break;
}
- DBG("mfm_request: Dropping out bottom\n");
+ DBG("Dropping out bottom\n");
}
static void do_mfm_request(request_queue_t *q)
{
- DBG("do_mfm_request: about to mfm_request\n");
+ DBG("about to mfm_request\n");
mfm_request();
}
@@ -958,7 +938,7 @@ static void mfm_interrupt_handler(int un
do_mfm = NULL;
- DBG("mfm_interrupt_handler (handler=0x%p)\n", handler);
+ DBG("(handler=0x%p)\n", handler);
mfm_status = inw(MFM_STATUS);
@@ -978,7 +958,7 @@ static void mfm_interrupt_handler(int un
return;
}
outw (CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
- printk ("mfm: unexpected interrupt - status = ");
+ printk (KERN_WARNING PFX "unexpected interrupt - status = ");
print_status ();
while (1);
}
@@ -996,7 +976,7 @@ static void mfm_geometry(int drive)
struct gendisk *disk = mfm_gendisk[drive];
disk->private_data = p;
if (p->cylinders)
- printk ("%s: %dMB CHS=%d/%d/%d LCC=%d RECOMP=%d\n",
+ pr_info ("%s: %dMB CHS=%d/%d/%d LCC=%d RECOMP=%d\n",
disk->disk_name,
p->cylinders * p->heads * p->sectors / 4096,
p->cylinders, p->heads, p->sectors,
@@ -1108,7 +1088,8 @@ static int mfm_initdrives(void)
if (number_mfm_drives > MFM_MAXDRIVES) {
number_mfm_drives = MFM_MAXDRIVES;
- printk("No. of ADFS MFM drives is greater than MFM_MAXDRIVES -
you can't have that many!\n");
+ printk(KERN_WARNING "No. of ADFS MFM drives is greater than "
+ "MFM_MAXDRIVES - you can't have that many!\n");
}
for (drive = 0; drive < number_mfm_drives; drive++) {
@@ -1199,7 +1180,7 @@ void xd_set_geometry(struct block_device
p->cylinders = discsize / (secsptrack * heads * secsize);
if ((heads < 1) || (p->cylinders > 1024)) {
- printk("%s: Insane disc shape! Setting to 512/4/32\n",
+ printk(KERN_WARNING "%s: Insane disc shape! Setting to
512/4/32\n",
bdev->bd_disk->disk_name);
/* These values are fairly arbitary, but are there so
that if your
@@ -1260,7 +1241,7 @@ static int mfm_do_init(unsigned char irq
{
int i, ret;
- printk("mfm: found at address %08X, interrupt %d\n", mfm_addr, mfm_irq);
+ pr_info(PFX "controller found at address %08X, interrupt %d\n",
mfm_addr, mfm_irq);
ret = -EBUSY;
if (!request_region (mfm_addr, 10, "mfm"))
@@ -1299,11 +1280,11 @@ static int mfm_do_init(unsigned char irq
mfm_gendisk[i] = disk;
}
- printk("mfm: detected %d hard drive%s\n", mfm_drives,
+ pr_info(PFX "detected %d hard drive%s\n", mfm_drives,
mfm_drives == 1 ? "" : "s");
ret = request_irq(mfm_irq, mfm_interrupt_handler, SA_INTERRUPT, "MFM
harddisk", NULL);
if (ret) {
- printk("mfm: unable to get IRQ%d\n", mfm_irq);
+ printk(KERN_ERR PFX "unable to get IRQ%d\n", mfm_irq);
goto out4;
}
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
