Dave,

Please pull the following batch of fixes for the 3.16 stream...

For the mac80211 bits, Johannes says:

"We have a fix from Eliad for a time calculation, a fix from Max for
head/tailroom when sending authentication packets, a revert that Felix
requested since the patch in question broke regulatory and a fix from
myself for an issue with a new command that we advertised in the wrong
place."

For the bluetooth bits, Gustavo says:

"A few fixes for 3.16. This pull request contains a NULL dereference fix,
and some security/pairing fixes."

For the iwlwifi bits, Emmanuel says:

"I have here a fix from Eliad for scheduled scan: it fixes a firmware
assertion. Arik reverts a patch I made that didn't take into account
that 3160 doesn't have UAPSD and hence, we can't assume that all
newer firmwares support the feature. Here too, the visible effect
is a firmware assertion. Along with that, we have a few fixes and
additions to the device list."

For the ath10k bits, Kalle says:

"Bartosz fixed an issue where we were not able to create 8 vdevs when
using DFS. Michal removed a false warning which was just confusing
people."

On top of that...

Arend van Spriel fixes a 'divide by zero' regression in brcmfmac.

Amitkumar Karwar corrects a transmit timeout in mwifiex.

---

The following changes since commit e940f5d6ba6a01f8dbb870854d5205d322452730:

  ipv6: Fix MLD Query message check (2014-06-27 00:21:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem

for you to fetch changes up to f9fa39e9ace5a8abbe9597c2970828ced67261da:

  Merge branch 'master' of 
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 
(2014-06-27 13:35:56 -0400)

----------------------------------------------------------------

Amitkumar Karwar (1):
      mwifiex: fix Tx timeout issue

Arend van Spriel (1):
      brcmfmac: assign chip id and rev in bus interface after brcmf_usb_dlneeded

Arik Nemtsov (1):
      Revert "iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag"

Bartosz Markowski (1):
      ath10k: fix 8th virtual AP interface with DFS

Eliad Peller (2):
      cfg80211: fix elapsed_jiffies calculation
      iwlwifi: mvm: rework sched scan channel configuration

Johan Hedberg (3):
      Bluetooth: Fix overriding higher security level in SMP
      Bluetooth: Refactor authentication method lookup into its own function
      Bluetooth: Fix rejecting pairing in case of insufficient capabilities

Johannes Berg (2):
      Revert "cfg80211: Use 5MHz bandwidth by default when checking usable 
channels"
      nl80211: move set_qos_map command into split state

John W. Linville (5):
      Merge git://git.kernel.org/.../jberg/mac80211
      Merge branch 'for-john' of git://git.kernel.org/.../iwlwifi/iwlwifi-fixes
      Merge branch 'for-upstream' of 
git://git.kernel.org/.../bluetooth/bluetooth
      Merge branch 'ath-current' of git://github.com/kvalo/ath
      Merge branch 'master' of git://git.kernel.org/.../linville/wireless into 
for-davem

Loic Poulain (1):
      Bluetooth: Ignore H5 non-link packets in non-active state

Lukasz Rymanowski (1):
      Bluetooth: Fix for ACL disconnect when pairing fails

Marcel Holtmann (1):
      Revert "Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012."

Max Stepanov (1):
      mac80211: WEP extra head/tail room in ieee80211_send_auth

Michal Kazior (1):
      ath10k: remove unnecessary htt rx corruption check

Oren Givon (1):
      iwlwifi: update the 7265 series HW IDs

 drivers/bluetooth/ath3k.c                     |  2 -
 drivers/bluetooth/btusb.c                     |  1 -
 drivers/bluetooth/hci_h5.c                    |  1 +
 drivers/net/wireless/ath/ath10k/core.c        |  6 ++-
 drivers/net/wireless/ath/ath10k/htt_rx.c      | 18 --------
 drivers/net/wireless/brcm80211/brcmfmac/usb.c |  5 ++-
 drivers/net/wireless/iwlwifi/iwl-fw.h         |  1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c   |  7 +++
 drivers/net/wireless/iwlwifi/mvm/scan.c       | 65 ++++++++-------------------
 drivers/net/wireless/iwlwifi/pcie/drv.c       |  3 +-
 drivers/net/wireless/mwifiex/main.c           |  1 +
 net/bluetooth/hci_conn.c                      | 12 ++++-
 net/bluetooth/smp.c                           | 60 +++++++++++++++++++------
 net/mac80211/util.c                           |  5 ++-
 net/wireless/core.h                           |  2 +-
 net/wireless/nl80211.c                        | 11 +++--
 net/wireless/reg.c                            | 22 +++------
 17 files changed, 112 insertions(+), 110 deletions(-)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index f98380648cb3..f50dffc0374f 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = {
        { USB_DEVICE(0x0b05, 0x17d0) },
        { USB_DEVICE(0x0CF3, 0x0036) },
        { USB_DEVICE(0x0CF3, 0x3004) },
-       { USB_DEVICE(0x0CF3, 0x3005) },
        { USB_DEVICE(0x0CF3, 0x3008) },
        { USB_DEVICE(0x0CF3, 0x311D) },
        { USB_DEVICE(0x0CF3, 0x311E) },
@@ -140,7 +139,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
        { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-       { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a1c80b0c7663..6250fc2fb93a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -162,7 +162,6 @@ static const struct usb_device_id blacklist_table[] = {
        { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-       { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 04680ead9275..fede8ca7147c 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -406,6 +406,7 @@ static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned 
char c)
            H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
                BT_ERR("Non-link packet received in non-active state");
                h5_reset_rx(h5);
+               return 0;
        }
 
        h5->rx_func = h5_rx_payload;
diff --git a/drivers/net/wireless/ath/ath10k/core.c 
b/drivers/net/wireless/ath/ath10k/core.c
index 82017f56e661..e6c56c5bb0f6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -795,7 +795,11 @@ int ath10k_core_start(struct ath10k *ar)
        if (status)
                goto err_htc_stop;
 
-       ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+       if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+               ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1;
+       else
+               ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+
        INIT_LIST_HEAD(&ar->arvifs);
 
        if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c 
b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 6c102b1312ff..eebc860c3655 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -312,7 +312,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
        int msdu_len, msdu_chaining = 0;
        struct sk_buff *msdu;
        struct htt_rx_desc *rx_desc;
-       bool corrupted = false;
 
        lockdep_assert_held(&htt->rx_ring.lock);
 
@@ -439,9 +438,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
                last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
                                RX_MSDU_END_INFO0_LAST_MSDU;
 
-               if (msdu_chaining && !last_msdu)
-                       corrupted = true;
-
                if (last_msdu) {
                        msdu->next = NULL;
                        break;
@@ -457,20 +453,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
                msdu_chaining = -1;
 
        /*
-        * Apparently FW sometimes reports weird chained MSDU sequences with
-        * more than one rx descriptor. This seems like a bug but needs more
-        * analyzing. For the time being fix it by dropping such sequences to
-        * avoid blowing up the host system.
-        */
-       if (corrupted) {
-               ath10k_warn("failed to pop chained msdus, dropping\n");
-               ath10k_htt_rx_free_msdu_chain(*head_msdu);
-               *head_msdu = NULL;
-               *tail_msdu = NULL;
-               msdu_chaining = -EINVAL;
-       }
-
-       /*
         * Don't refill the ring yet.
         *
         * First, the elements popped here are still in use - it is not
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c 
b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 6db51a666f61..d06fcb05adf2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1184,8 +1184,6 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info 
*devinfo)
        bus->bus_priv.usb = bus_pub;
        dev_set_drvdata(dev, bus);
        bus->ops = &brcmf_usb_bus_ops;
-       bus->chip = bus_pub->devid;
-       bus->chiprev = bus_pub->chiprev;
        bus->proto_type = BRCMF_PROTO_BCDC;
        bus->always_use_fws_queue = true;
 
@@ -1194,6 +1192,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info 
*devinfo)
                if (ret)
                        goto fail;
        }
+       bus->chip = bus_pub->devid;
+       bus->chiprev = bus_pub->chiprev;
+
        /* request firmware here */
        brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
                               brcmf_usb_probe_phase2);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h 
b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 0aa7c0085c9f..b1a33322b9ba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -88,6 +88,7 @@
  *     P2P client interfaces simultaneously if they are in different bindings.
  * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
  *     P2P client interfaces simultaneously if they are in same bindings.
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
  * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
  * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c 
b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 7215f5980186..1cef708cb74d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -303,6 +303,13 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
                hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
        }
 
+       if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT &&
+           !iwlwifi_mod_params.uapsd_disable) {
+               hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD;
+               hw->uapsd_queues = IWL_UAPSD_AC_INFO;
+               hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
+       }
+
        hw->sta_data_size = sizeof(struct iwl_mvm_sta);
        hw->vif_data_size = sizeof(struct iwl_mvm_vif);
        hw->chanctx_data_size = sizeof(u16);
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c 
b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 4b6c7d4bd199..eac2b424f6a0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -588,9 +588,7 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
                               struct iwl_scan_offload_cmd *scan,
                               struct iwl_mvm_scan_params *params)
 {
-       scan->channel_count =
-               mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels +
-               mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
+       scan->channel_count = req->n_channels;
        scan->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME);
        scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
        scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT;
@@ -669,61 +667,37 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm,
                                  struct cfg80211_sched_scan_request *req,
                                  struct iwl_scan_channel_cfg *channels,
                                  enum ieee80211_band band,
-                                 int *head, int *tail,
+                                 int *head,
                                  u32 ssid_bitmap,
                                  struct iwl_mvm_scan_params *params)
 {
-       struct ieee80211_supported_band *s_band;
-       int n_channels = req->n_channels;
-       int i, j, index = 0;
-       bool partial;
+       int i, index = 0;
 
-       /*
-        * We have to configure all supported channels, even if we don't want to
-        * scan on them, but we have to send channels in the order that we want
-        * to scan. So add requested channels to head of the list and others to
-        * the end.
-       */
-       s_band = &mvm->nvm_data->bands[band];
-
-       for (i = 0; i < s_band->n_channels && *head <= *tail; i++) {
-               partial = false;
-               for (j = 0; j < n_channels; j++)
-                       if (s_band->channels[i].center_freq ==
-                                               req->channels[j]->center_freq) {
-                               index = *head;
-                               (*head)++;
-                               /*
-                                * Channels that came with the request will be
-                                * in partial scan .
-                                */
-                               partial = true;
-                               break;
-                       }
-               if (!partial) {
-                       index = *tail;
-                       (*tail)--;
-               }
-               channels->channel_number[index] =
-                       cpu_to_le16(ieee80211_frequency_to_channel(
-                                       s_band->channels[i].center_freq));
+       for (i = 0; i < req->n_channels; i++) {
+               struct ieee80211_channel *chan = req->channels[i];
+
+               if (chan->band != band)
+                       continue;
+
+               index = *head;
+               (*head)++;
+
+               channels->channel_number[index] = cpu_to_le16(chan->hw_value);
                channels->dwell_time[index][0] = params->dwell[band].active;
                channels->dwell_time[index][1] = params->dwell[band].passive;
 
                channels->iter_count[index] = cpu_to_le16(1);
                channels->iter_interval[index] = 0;
 
-               if (!(s_band->channels[i].flags & IEEE80211_CHAN_NO_IR))
+               if (!(chan->flags & IEEE80211_CHAN_NO_IR))
                        channels->type[index] |=
                                cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE);
 
                channels->type[index] |=
-                               cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL);
-               if (partial)
-                       channels->type[index] |=
-                               cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
+                               cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL |
+                                           IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
 
-               if (s_band->channels[i].flags & IEEE80211_CHAN_NO_HT40)
+               if (chan->flags & IEEE80211_CHAN_NO_HT40)
                        channels->type[index] |=
                                cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_NARROW);
 
@@ -740,7 +714,6 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
        int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
        int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
        int head = 0;
-       int tail = band_2ghz + band_5ghz - 1;
        u32 ssid_bitmap;
        int cmd_len;
        int ret;
@@ -772,7 +745,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
                                              &scan_cfg->scan_cmd.tx_cmd[0],
                                              scan_cfg->data);
                iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
-                                     IEEE80211_BAND_2GHZ, &head, &tail,
+                                     IEEE80211_BAND_2GHZ, &head,
                                      ssid_bitmap, &params);
        }
        if (band_5ghz) {
@@ -782,7 +755,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
                                              scan_cfg->data +
                                                SCAN_OFFLOAD_PROBE_REQ_SIZE);
                iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
-                                     IEEE80211_BAND_5GHZ, &head, &tail,
+                                     IEEE80211_BAND_5GHZ, &head,
                                      ssid_bitmap, &params);
        }
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c 
b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 7091a18d5a72..98950e45c7b0 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -367,6 +367,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
        {IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x5412, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)},
+       {IWL_PCI_DEVICE(0x095A, 0x5510, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)},
@@ -380,7 +381,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
        {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
-       {IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)},
+       {IWL_PCI_DEVICE(0x095B, 0x9200, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
        {IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)},
diff --git a/drivers/net/wireless/mwifiex/main.c 
b/drivers/net/wireless/mwifiex/main.c
index cbabc12fbda3..e91cd0fa5ca8 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -645,6 +645,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct 
net_device *dev)
        }
 
        tx_info = MWIFIEX_SKB_TXCB(skb);
+       memset(tx_info, 0, sizeof(*tx_info));
        tx_info->bss_num = priv->bss_num;
        tx_info->bss_type = priv->bss_type;
        tx_info->pkt_len = skb->len;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ca01d1861854..a7a27bc2c0b1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -289,10 +289,20 @@ static void hci_conn_timeout(struct work_struct *work)
 {
        struct hci_conn *conn = container_of(work, struct hci_conn,
                                             disc_work.work);
+       int refcnt = atomic_read(&conn->refcnt);
 
        BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 
-       if (atomic_read(&conn->refcnt))
+       WARN_ON(refcnt < 0);
+
+       /* FIXME: It was observed that in pairing failed scenario, refcnt
+        * drops below 0. Probably this is because l2cap_conn_del calls
+        * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
+        * dropped. After that loop hci_chan_del is called which also drops
+        * conn. For now make sure that ACL is alive if refcnt is higher then 0,
+        * otherwise drop it.
+        */
+       if (refcnt > 0)
                return;
 
        switch (conn->state) {
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index f2829a7932e2..e33a982161c1 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -385,6 +385,16 @@ static const u8 gen_method[5][5] = {
        { CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP     },
 };
 
+static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io)
+{
+       /* If either side has unknown io_caps, use JUST WORKS */
+       if (local_io > SMP_IO_KEYBOARD_DISPLAY ||
+           remote_io > SMP_IO_KEYBOARD_DISPLAY)
+               return JUST_WORKS;
+
+       return gen_method[remote_io][local_io];
+}
+
 static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
                                                u8 local_io, u8 remote_io)
 {
@@ -401,14 +411,11 @@ static int tk_request(struct l2cap_conn *conn, u8 
remote_oob, u8 auth,
        BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io);
 
        /* If neither side wants MITM, use JUST WORKS */
-       /* If either side has unknown io_caps, use JUST WORKS */
        /* Otherwise, look up method from the table */
-       if (!(auth & SMP_AUTH_MITM) ||
-           local_io > SMP_IO_KEYBOARD_DISPLAY ||
-           remote_io > SMP_IO_KEYBOARD_DISPLAY)
+       if (!(auth & SMP_AUTH_MITM))
                method = JUST_WORKS;
        else
-               method = gen_method[remote_io][local_io];
+               method = get_auth_method(smp, local_io, remote_io);
 
        /* If not bonding, don't ask user to confirm a Zero TK */
        if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM)
@@ -669,7 +676,7 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, 
struct sk_buff *skb)
 {
        struct smp_cmd_pairing rsp, *req = (void *) skb->data;
        struct smp_chan *smp;
-       u8 key_size, auth;
+       u8 key_size, auth, sec_level;
        int ret;
 
        BT_DBG("conn %p", conn);
@@ -695,7 +702,19 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, 
struct sk_buff *skb)
        /* We didn't start the pairing, so match remote */
        auth = req->auth_req;
 
-       conn->hcon->pending_sec_level = authreq_to_seclevel(auth);
+       sec_level = authreq_to_seclevel(auth);
+       if (sec_level > conn->hcon->pending_sec_level)
+               conn->hcon->pending_sec_level = sec_level;
+
+       /* If we need MITM check that it can be acheived */
+       if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+               u8 method;
+
+               method = get_auth_method(smp, conn->hcon->io_capability,
+                                        req->io_capability);
+               if (method == JUST_WORKS || method == JUST_CFM)
+                       return SMP_AUTH_REQUIREMENTS;
+       }
 
        build_pairing_cmd(conn, req, &rsp, auth);
 
@@ -743,6 +762,16 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, 
struct sk_buff *skb)
        if (check_enc_key_size(conn, key_size))
                return SMP_ENC_KEY_SIZE;
 
+       /* If we need MITM check that it can be acheived */
+       if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+               u8 method;
+
+               method = get_auth_method(smp, req->io_capability,
+                                        rsp->io_capability);
+               if (method == JUST_WORKS || method == JUST_CFM)
+                       return SMP_AUTH_REQUIREMENTS;
+       }
+
        get_random_bytes(smp->prnd, sizeof(smp->prnd));
 
        smp->prsp[0] = SMP_CMD_PAIRING_RSP;
@@ -838,6 +867,7 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, 
struct sk_buff *skb)
        struct smp_cmd_pairing cp;
        struct hci_conn *hcon = conn->hcon;
        struct smp_chan *smp;
+       u8 sec_level;
 
        BT_DBG("conn %p", conn);
 
@@ -847,7 +877,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, 
struct sk_buff *skb)
        if (!(conn->hcon->link_mode & HCI_LM_MASTER))
                return SMP_CMD_NOTSUPP;
 
-       hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
+       sec_level = authreq_to_seclevel(rp->auth_req);
+       if (sec_level > hcon->pending_sec_level)
+               hcon->pending_sec_level = sec_level;
 
        if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
                return 0;
@@ -901,9 +933,12 @@ int smp_conn_security(struct hci_conn *hcon, __u8 
sec_level)
        if (smp_sufficient_security(hcon, sec_level))
                return 1;
 
+       if (sec_level > hcon->pending_sec_level)
+               hcon->pending_sec_level = sec_level;
+
        if (hcon->link_mode & HCI_LM_MASTER)
-               if (smp_ltk_encrypt(conn, sec_level))
-                       goto done;
+               if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
+                       return 0;
 
        if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
                return 0;
@@ -918,7 +953,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
         * requires it.
         */
        if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
-           sec_level > BT_SECURITY_MEDIUM)
+           hcon->pending_sec_level > BT_SECURITY_MEDIUM)
                authreq |= SMP_AUTH_MITM;
 
        if (hcon->link_mode & HCI_LM_MASTER) {
@@ -937,9 +972,6 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
 
        set_bit(SMP_FLAG_INITIATOR, &smp->flags);
 
-done:
-       hcon->pending_sec_level = sec_level;
-
        return 0;
 }
 
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 6886601afe1c..a6cda52ed920 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1096,11 +1096,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data 
*sdata,
        int err;
 
        /* 24 + 6 = header + auth_algo + auth_transaction + status_code */
-       skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+       skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+                           24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
        if (!skb)
                return;
 
-       skb_reserve(skb, local->hw.extra_tx_headroom);
+       skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
 
        mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
        memset(mgmt, 0, 24 + 6);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index e9afbf10e756..7e3a3cef7df9 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned 
long start)
        if (end >= start)
                return jiffies_to_msecs(end - start);
 
-       return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+       return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
 }
 
 void
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ba4f1723c83a..6668daf69326 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1497,18 +1497,17 @@ static int nl80211_send_wiphy(struct 
cfg80211_registered_device *rdev,
                }
                CMD(start_p2p_device, START_P2P_DEVICE);
                CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+               CMD(testmode_cmd, TESTMODE);
+#endif
                if (state->split) {
                        CMD(crit_proto_start, CRIT_PROTOCOL_START);
                        CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
                        if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
                                CMD(channel_switch, CHANNEL_SWITCH);
+                       CMD(set_qos_map, SET_QOS_MAP);
                }
-               CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
-               CMD(testmode_cmd, TESTMODE);
-#endif
-
+               /* add into the if now */
 #undef CMD
 
                if (rdev->ops->connect || rdev->ops->auth) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 558b0e3a02d8..1afdf45db38f 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq,
                if (!band_rule_found)
                        band_rule_found = freq_in_rule_band(fr, center_freq);
 
-               bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+               bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
 
                if (band_rule_found && bw_fits)
                        return rr;
@@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct 
ieee80211_regdomain *regd,
 }
 #endif
 
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
  */
 static void handle_channel(struct wiphy *wiphy,
                           enum nl80211_reg_initiator initiator,
@@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy,
        if (reg_rule->flags & NL80211_RRF_AUTO_BW)
                max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-       if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-               bw_flags = IEEE80211_CHAN_NO_10MHZ;
-       if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-               bw_flags |= IEEE80211_CHAN_NO_20MHZ;
        if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-               bw_flags |= IEEE80211_CHAN_NO_HT40;
+               bw_flags = IEEE80211_CHAN_NO_HT40;
        if (max_bandwidth_khz < MHZ_TO_KHZ(80))
                bw_flags |= IEEE80211_CHAN_NO_80MHZ;
        if (max_bandwidth_khz < MHZ_TO_KHZ(160))
@@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
        if (reg_rule->flags & NL80211_RRF_AUTO_BW)
                max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-       if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-               bw_flags = IEEE80211_CHAN_NO_10MHZ;
-       if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-               bw_flags |= IEEE80211_CHAN_NO_20MHZ;
        if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-               bw_flags |= IEEE80211_CHAN_NO_HT40;
+               bw_flags = IEEE80211_CHAN_NO_HT40;
        if (max_bandwidth_khz < MHZ_TO_KHZ(80))
                bw_flags |= IEEE80211_CHAN_NO_80MHZ;
        if (max_bandwidth_khz < MHZ_TO_KHZ(160))
-- 
John W. Linville                Someday the world will need a hero, and you
linvi...@tuxdriver.com                  might be all we have.  Be ready.

Attachment: pgpHoKk2SKjGs.pgp
Description: PGP signature

Reply via email to