apci1564_cos_insn_config() is currently using apci1564_reset() to disable
digital input interrupts when the configuration operation is
COMEDI_DIGITAL_TRIG_DISABLE.  However, this is incorrect as the device reset
function also resets the registers for the digital outputs, timer, watchdog, and
counters as well.  Replace the reset function call with a direct disabling of
just the digital input interrupts.

Signed-off-by: Chase Southwood <chase.southw...@gmail.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: H Hartley Sweeten <hswee...@visionengravers.com>
---
 drivers/staging/comedi/drivers/addi_apci_1564.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c 
b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 59786e7..0141ed9 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -285,7 +285,10 @@ static int apci1564_cos_insn_config(struct comedi_device 
*dev,
                        devpriv->ctrl = 0;
                        devpriv->mode1 = 0;
                        devpriv->mode2 = 0;
-                       apci1564_reset(dev);
+                       outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
+                       inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG);
+                       outl(0x0, devpriv->amcc_iobase + 
APCI1564_DI_INT_MODE1_REG);
+                       outl(0x0, devpriv->amcc_iobase + 
APCI1564_DI_INT_MODE2_REG);
                        break;
                case COMEDI_DIGITAL_TRIG_ENABLE_EDGES:
                        if (devpriv->ctrl != (APCI1564_DI_INT_ENABLE |
-- 
2.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to