On Thu, Jul 03, 2014 at 07:15:01PM +0530, Keerthy wrote: > Add TPS65218 device tree nodes. > > Signed-off-by: Keerthy <j-keer...@ti.com> > --- > arch/arm/boot/dts/am437x-gp-evm.dts | 38 > +++++++++++++++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts > b/arch/arm/boot/dts/am437x-gp-evm.dts > index 003766c..fc35d24 100644 > --- a/arch/arm/boot/dts/am437x-gp-evm.dts > +++ b/arch/arm/boot/dts/am437x-gp-evm.dts > @@ -260,6 +260,44 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&i2c0_pins>; > + clock-frequency = <400000>;
same as before, also indentation is wrong, but I see indentation was
already wrong on this file, perhaps add a patch before this one fixing
that so this file is indented with tabs only ?
> +
> + tps65218: tps65218@24 {
> + reg = <0x24>;
> + compatible = "ti,tps65218";
> + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + dcdc1: regulator-dcdc1 {
> + compatible = "ti,tps65218-dcdc1";
> + /* VDD_CORE voltage limits min of OPP50 and max of
> OPP100 */
> + regulator-name = "vdd_core";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <1144000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + dcdc2: regulator-dcdc2 {
> + compatible = "ti,tps65218-dcdc2";
> + /* VDD_MPU voltage limits min of OPP50 and max of
> OPP_NITRO */
> + regulator-name = "vdd_mpu";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <1378000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
also missing dcdc3/4/5. (6 has a non-populated 0 ohm resistor, so it
should be turned off).
> + ldo1: regulator-ldo1 {
> + compatible = "ti,tps65218-ldo1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> };
>
> &i2c1 {
> --
> 1.7.9.5
>
--
balbi
signature.asc
Description: Digital signature
