Added dt binding documentation of PCIe in DRA7xx.
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
---
Documentation/devicetree/bindings/pci/ti-pci.txt | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt
b/Documentation/devicetree/bindings/pci/ti-pci.txt
new file mode 100644
index 0000000..3d21791
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -0,0 +1,59 @@
+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+ The second entry must be "rc-dbics" for the designware pcie
+ registers
+ The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+ where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+ main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+ #size-cells,
+ #interrupt-cells,
+ device_type,
+ ranges,
+ num-lanes,
+ interrupt-map-mask,
+ interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
