Hi,
Antoine Ténart wrote:
> The current implementation of the libahci does not allow to use multiple
> PHYs. This patch adds the support of multiple PHYs by the libahci while
> keeping the old bindings valid for device tree compatibility.
>
> This introduce a new way of defining SATA ports in the device tree, with
> one port per sub-node. This as the advantage of allowing a per port
> configuration. Because some ports may be accessible but disabled in the
> device tree, the port_map mask is computed automatically when using
> this.
>
> Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
> ---
> drivers/ata/ahci.h | 3 +-
> drivers/ata/libahci_platform.c | 179
> ++++++++++++++++++++++++++++++++---------
> 2 files changed, 142 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index cb8d58926851..b0ea7b077d6e 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -332,7 +332,8 @@ struct ahci_host_priv {
> bool got_runtime_pm; /* Did we do pm_runtime_get? */
> struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
> struct regulator *target_pwr; /* Optional */
> - struct phy *phy; /* If platform uses phy */
> + struct phy **phys; /* If platform uses phys */
> + unsigned nphys; /* Number of phys */
> void *plat_data; /* Other platform data */
> /*
> * Optional ahci_start_engine override, if not set this gets set to the
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index db9b90d876dd..2c2439b4101d 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -39,6 +39,61 @@ static struct scsi_host_template ahci_platform_sht = {
> };
>
> /**
> + * ahci_platform_enable_phys - Enable PHYs
> + * @hpriv: host private area to store config values
> + *
> + * This function enables all the PHYs found in hpriv->phys, if any.
> + * If a PHY fails to be enabled, it disables all the PHYs already
> + * enabled in reverse order and returns an error.
> + *
> + * RETURNS:
> + * 0 on success otherwise a negative error code
> + */
> +int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
> +{
> + int i, rc = 0;
> +
You shouldn't have to initialize rc here, or does your gcc falsely
complain about an uninitialized variable if you don't?
> + for (i = 0; i < hpriv->nphys; i++) {
> + rc = phy_init(hpriv->phys[i]);
> + if (rc)
> + goto disable_phys;
> +
> + rc = phy_power_on(hpriv->phys[i]);
> + if (rc) {
> + phy_exit(hpriv->phys[i]);
> + goto disable_phys;
> + }
> + }
> +
> + return 0;
> +
> +disable_phys:
> + while (--i >= 0) {
> + phy_power_off(hpriv->phys[i]);
> + phy_exit(hpriv->phys[i]);
> + }
> + return rc;
> +}
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | i...@karo-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
