The Colibri VF61 is a module which needs a carrier board to actually
run. Different carrier board have different hardware support, hence
we should reflect this in the device tree files. This patch adds the
Colibri Evaluation Board, which supports almost all peripherals
defined in the Colibri standard.

Also align the compatible naming, file splitting and file naming with
the scheme which was choosen for the Tegra based modules.

Signed-off-by: Stefan Agner <[email protected]>
---
 arch/arm/boot/dts/Makefile                  |   2 +-
 arch/arm/boot/dts/vf610-colibri-eval-v3.dts |  46 +++++++++++
 arch/arm/boot/dts/vf610-colibri.dts         | 123 ----------------------------
 arch/arm/boot/dts/vf610-colibri.dtsi        | 113 +++++++++++++++++++++++++
 4 files changed, 160 insertions(+), 124 deletions(-)
 create mode 100644 arch/arm/boot/dts/vf610-colibri-eval-v3.dts
 delete mode 100644 arch/arm/boot/dts/vf610-colibri.dts
 create mode 100644 arch/arm/boot/dts/vf610-colibri.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index adb5ed9..acb552c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -216,7 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6q-udoo.dtb \
        imx6q-wandboard.dtb \
        imx6sl-evk.dtb \
-       vf610-colibri.dtb \
+       vf610-colibri-eval-v3.dtb \
        vf610-cosmic.dtb \
        vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts 
b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
new file mode 100644
index 0000000..7fb3066
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+
+/ {
+       model = "Toradex Colibri VF61 on Colibri Evaluation Board";
+       compatible = "toradex,vf610-colibri_vf61-on-eval", 
"toradex,vf610-colibri_vf61", "fsl,vf610";
+
+       chosen {
+               bootargs = "console=ttyLP0,115200";
+       };
+};
+
+&esdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_esdhc1>;
+       bus-width = <4>;
+       status = "okay";
+};
+
+&fec1 {
+       phy-mode = "rmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1>;
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dts 
b/arch/arm/boot/dts/vf610-colibri.dts
deleted file mode 100644
index aecc7db..0000000
--- a/arch/arm/boot/dts/vf610-colibri.dts
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Copyright 2014 Toradex AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-       model = "Toradex Colibri VF61 COM";
-       compatible = "toradex,vf610-colibri", "fsl,vf610";
-
-       chosen {
-               bootargs = "console=ttyLP0,115200";
-       };
-
-       memory {
-               reg = <0x80000000 0x10000000>;
-       };
-
-       clocks {
-               enet_ext {
-                       compatible = "fixed-clock";
-                       #clock-cells = <0>;
-                       clock-frequency = <50000000>;
-               };
-       };
-
-};
-
-&esdhc1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_esdhc1>;
-       bus-width = <4>;
-       status = "okay";
-};
-
-&fec1 {
-       phy-mode = "rmii";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_fec1>;
-       status = "okay";
-};
-
-&L2 {
-       arm,data-latency = <2 1 2>;
-       arm,tag-latency = <3 2 3>;
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart0>;
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&iomuxc {
-       vf610-colibri {
-               pinctrl_esdhc1: esdhc1grp {
-                       fsl,fsl,pins = <
-                               VF610_PAD_PTA24__ESDHC1_CLK     0x31ef
-                               VF610_PAD_PTA25__ESDHC1_CMD     0x31ef
-                               VF610_PAD_PTA26__ESDHC1_DAT0    0x31ef
-                               VF610_PAD_PTA27__ESDHC1_DAT1    0x31ef
-                               VF610_PAD_PTA28__ESDHC1_DATA2   0x31ef
-                               VF610_PAD_PTA29__ESDHC1_DAT3    0x31ef
-                               VF610_PAD_PTB20__GPIO_42        0x219d
-                       >;
-               };
-
-               pinctrl_fec1: fec1grp {
-                       fsl,pins = <
-                               VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
-                               VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
-                               VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
-                               VF610_PAD_PTC12__ENET_RMII_RXD1         0x30d1
-                               VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
-                               VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
-                               VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
-                               VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
-                               VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
-                       >;
-               };
-
-               pinctrl_uart0: uart0grp {
-                       fsl,pins = <
-                               VF610_PAD_PTB10__UART0_TX               0x21a2
-                               VF610_PAD_PTB11__UART0_RX               0x21a1
-                       >;
-               };
-
-               pinctrl_uart1: uart1grp {
-                       fsl,pins = <
-                               VF610_PAD_PTB4__UART1_TX                0x21a2
-                               VF610_PAD_PTB5__UART1_RX                0x21a1
-                       >;
-               };
-
-               pinctrl_uart2: uart2grp {
-                       fsl,pins = <
-                               VF610_PAD_PTD0__UART2_TX                0x21a2
-                               VF610_PAD_PTD1__UART2_RX                0x21a1
-                               VF610_PAD_PTD2__UART2_RTS               0x21a2
-                               VF610_PAD_PTD3__UART2_CTS               0x21a1
-                       >;
-               };
-       };
-};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi 
b/arch/arm/boot/dts/vf610-colibri.dtsi
new file mode 100644
index 0000000..e595c29
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf610.dtsi"
+
+/ {
+       model = "Toradex Colibri VF61 COM";
+       compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
+
+       memory {
+               reg = <0x80000000 0x10000000>;
+       };
+
+       clocks {
+               enet_ext {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <50000000>;
+               };
+       };
+
+};
+
+&esdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_esdhc1>;
+       bus-width = <4>;
+};
+
+&fec1 {
+       phy-mode = "rmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&L2 {
+       arm,data-latency = <2 1 2>;
+       arm,tag-latency = <3 2 3>;
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&iomuxc {
+       vf610-colibri {
+               pinctrl_esdhc1: esdhc1grp {
+                       fsl,pins = <
+                               VF610_PAD_PTA24__ESDHC1_CLK     0x31ef
+                               VF610_PAD_PTA25__ESDHC1_CMD     0x31ef
+                               VF610_PAD_PTA26__ESDHC1_DAT0    0x31ef
+                               VF610_PAD_PTA27__ESDHC1_DAT1    0x31ef
+                               VF610_PAD_PTA28__ESDHC1_DATA2   0x31ef
+                               VF610_PAD_PTA29__ESDHC1_DAT3    0x31ef
+                               VF610_PAD_PTB20__GPIO_42        0x219d
+                       >;
+               };
+
+               pinctrl_fec1: fec1grp {
+                       fsl,pins = <
+                               VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
+                               VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
+                               VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
+                               VF610_PAD_PTC12__ENET_RMII_RXD1         0x30d1
+                               VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
+                               VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
+                               VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
+                               VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
+                               VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
+                       >;
+               };
+
+               pinctrl_uart0: uart0grp {
+                       fsl,pins = <
+                               VF610_PAD_PTB10__UART0_TX               0x21a2
+                               VF610_PAD_PTB11__UART0_RX               0x21a1
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               VF610_PAD_PTB4__UART1_TX                0x21a2
+                               VF610_PAD_PTB5__UART1_RX                0x21a1
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               VF610_PAD_PTD0__UART2_TX                0x21a2
+                               VF610_PAD_PTD1__UART2_RX                0x21a1
+                               VF610_PAD_PTD2__UART2_RTS               0x21a2
+                               VF610_PAD_PTD3__UART2_CTS               0x21a1
+                       >;
+               };
+       };
+};
-- 
2.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to