> Got a problem here with the last few Linus -bk releases. > > 2.6.11-bk2 is running fine. > > 2.6.11-bk3 - 2.6.11-bk6 has the following problem: > > Everything is fine while the machine is booting. However as soon as X > starts up the screen goes blank as normal but stays blank, no gdm login > screen and the hard disk and floppy drive lights are on continuously. > The machine is now locked up solid and needs a hard reset. > > I tried a serial console but get nothing after the kernel messages and > the agetty login. > > The machine is question is an UP Athlon 1800+ XP with 768MB RAM, the > graphics card is an AGP ATI Radeon 9200SE using the kernel AGP/DRM > drivers and the Xorg radeon driver. > > It's running FC3. > > I've put 2.6.11-bk2 and 2.6.11-bk6 config's, dmesg's and an lspc -vv up > on the web. > > http://digital-domain.net/kernel/2.6.11-bk2.config > http://digital-domain.net/kernel/2.6.11-bk6.config > http://digital-domain.net/kernel/2.6.11-bk2.dmesg > http://digital-domain.net/kernel/2.6.11-bk6.dmesg > http://digital-domain.net/kernel/lspci-vv > > When looking at this the other day I did get a message on the serial > console after X started and the machine locked, about uhci host > controller being disabled or something. Unfortunately I didn't make a > note of it and didn't get it today for when I was preparing this report. > > Looking at the two dmesg's there is some difference in the usb messages. > > Anyway, thanks for your time and if you need any more info just let me > know.
This is the same problem as i just mailed everyone about.. more information here... Dave. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/