From: Doug Anderson <[email protected]> The EHCI and HSIC device tree nodes were added in the wrong place. Fix them.
Signed-off-by: Doug Anderson <[email protected]> Signed-off-by: Kever Yang <[email protected]> --- Changes in v3: - EHCI and HSIC move new for version 3. Changes in v2: None arch/arm/boot/dts/rk3288.dtsi | 41 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 21 deletions(-) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index a5607a1..673dee3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -205,6 +205,17 @@ status = "disabled"; }; + usb_host0_ehci: ehci@ff500000 { + compatible = "generic-ehci"; + reg = <0xff500000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST0>; + clock-names = "usbhost"; + status = "disabled"; + }; + + /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + usb_host1: usb@ff540000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2"; @@ -225,6 +236,15 @@ status = "disabled"; }; + usb_hsic: ehci@ff5c0000 { + compatible = "generic-ehci"; + reg = <0xff5c0000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HSIC>; + clock-names = "usbhost"; + status = "disabled"; + }; + uart2: serial@ff690000 { compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; reg = <0xff690000 0x100>; @@ -319,27 +339,6 @@ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - - usb_host0_ehci: ehci@ff500000 { - compatible = "generic-ehci"; - reg = <0xff500000 0x100>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_USBHOST0>; - clock-names = "usbhost"; - status = "disabled"; - }; - - /* NOTE: ohci@ff520000 doesn't actually work on hardware */ - - usb_hsic: ehci@ff5c0000 { - compatible = "generic-ehci"; - reg = <0xff5c0000 0x100>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HSIC>; - clock-names = "usbhost"; - status = "disabled"; - }; - gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
