Le Wednesday 06 August 2014 à 21:05 +0000, Goffredo Baroncelli a écrit :
> Remove attach_method because i2c-powermac is
> in charge to instantiate the driver directly.
> 
> Signed-off-by: Goffredo Baroncelli <kreij...@inwind.it>
> ---
>  drivers/macintosh/therm_windtunnel.c | 35 -----------------------------------
>  1 file changed, 35 deletions(-)
> 
> diff --git a/drivers/macintosh/therm_windtunnel.c 
> b/drivers/macintosh/therm_windtunnel.c
> index a64a06f..1e50455 100644
> --- a/drivers/macintosh/therm_windtunnel.c
> +++ b/drivers/macintosh/therm_windtunnel.c
> @@ -300,40 +300,6 @@ static int control_loop(void *dummy)
>  /*   i2c probing and setup                                           */
>  /************************************************************************/
>  
> -static int
> -do_attach( struct i2c_adapter *adapter )
> -{
> -     /* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
> -     static const unsigned short scan_ds1775[] = {
> -             0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
> -             I2C_CLIENT_END
> -     };
> -     static const unsigned short scan_adm1030[] = {
> -             0x2c, 0x2d, 0x2e, 0x2f,
> -             I2C_CLIENT_END
> -     };
> -
> -     if( strncmp(adapter->name, "uni-n", 5) )
> -             return 0;
> -
> -     if( !x.running ) {
> -             struct i2c_board_info info;
> -
> -             memset(&info, 0, sizeof(struct i2c_board_info));
> -             strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
> -             i2c_new_probed_device(adapter, &info, scan_ds1775, NULL);
> -
> -             strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
> -             i2c_new_probed_device(adapter, &info, scan_adm1030, NULL);
> -
> -             if( x.thermostat && x.fan ) {
> -                     x.running = 1;
> -                     x.poll_task = kthread_run(control_loop, NULL, "g4fand");
> -             }
> -     }
> -     return 0;
> -}
> -
>  static void
>  try_start_control_loop(void)
>  {
> @@ -450,7 +416,6 @@ static struct i2c_driver g4fan_driver = {
>       .driver = {
>               .name   = "therm_windtunnel",
>       },
> -     .attach_adapter = do_attach,
>       .probe          = do_probe,
>       .remove         = do_remove,
>       .id_table       = therm_windtunnel_id,

Acked-by: Jean Delvare <jdelv...@suse.de>

-- 
Jean Delvare
SUSE L3 Support

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to