Previously, of_pci_range_to_resource() would return a resource that contained physical addresses of the IO space even if the IORESOURCE_IO flags mandate a logical port set of values. Now that the function has been fixed we need to update the drivers that were taking advantage of the old behaviour.
Cc: Linus Walleij <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Signed-off-by: Liviu Dudau <[email protected]> --- arch/arm/mach-integrator/pci_v3.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 05e1f73..193b7f8 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void) { unsigned long flags; unsigned int temp; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pcibios_min_mem = 0x00100000; @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void) /* * Setup window 2 - PCI IO */ - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void) static void __init pci_v3_postinit(void) { unsigned int pci_cmd; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pci_cmd = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void) "interrupt: %d\n", ret); #endif - register_isa_ports(non_mem.start, io_mem.start, 0); + register_isa_ports(non_mem.start, io_address, 0); } /* @@ -867,33 +869,33 @@ static int __init pci_v3_probe(struct platform_device *pdev) for_each_of_pci_range(&parser, &range) { if (!range.flags) { - of_pci_range_to_resource(&range, np, &conf_mem); + ret = of_pci_range_to_resource(&range, np, &conf_mem); conf_mem.name = "PCIv3 config"; } if (range.flags & IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &io_mem); + ret = of_pci_range_to_resource(&range, np, &io_mem); + dev_info(&pdev->dev, "IO PCI range converted\n"); io_mem.name = "PCIv3 I/O"; } if ((range.flags & IORESOURCE_MEM) && !(range.flags & IORESOURCE_PREFETCH)) { non_mem_pci = range.pci_addr; non_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &non_mem); + ret = of_pci_range_to_resource(&range, np, &non_mem); non_mem.name = "PCIv3 non-prefetched mem"; } if ((range.flags & IORESOURCE_MEM) && (range.flags & IORESOURCE_PREFETCH)) { pre_mem_pci = range.pci_addr; pre_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &pre_mem); + ret = of_pci_range_to_resource(&range, np, &pre_mem); pre_mem.name = "PCIv3 prefetched mem"; } - } - if (!conf_mem.start || !io_mem.start || - !non_mem.start || !pre_mem.start) { - dev_err(&pdev->dev, "missing ranges in device node\n"); - return -EINVAL; + if (ret < 0) { + dev_err(&pdev->dev, "missing ranges in device node\n"); + return -EINVAL; + } } pci_v3.map_irq = of_irq_parse_and_map_pci; -- 2.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
