On 08/21/2014 11:14 PM, Murphy, Dan wrote: [...]
DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators. Adding dt binding for this part
Signed-off-by: Dan Murphy <[email protected]> --- .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt new file mode 100644 index 0000000..525216d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt @@ -0,0 +1,18 @@ +Texas Instruments - drv2667 Haptics driver + +The drv2667 uses serial control bus communicates through I2C protocols + +Required properties: + - compatible - "ti,drv2667" - DRV2667 + - reg - I2C slave address + - vbat-supply - Required supply regulator + +Example: + +drv2667: drv2667@59 {
The ePAPR standard [1] has something to say on this matter:
What is this reference? Did not know this existed so wanted to read up on it.
Sorry, forgot to paste the link. :-< [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
