Add the port number and vbus property for ohci port, or else if
bootloader won't configure the vbus pin, the 5v supply is not
power on, so can not work with usb devices.
Signed-off-by: Bo Shen <voice.s...@atmel.com>
---
arch/arm/boot/dts/at91sam9n12ek.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
b/arch/arm/boot/dts/at91sam9n12ek.dts
index 83d7237..13bb24e 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -136,6 +136,8 @@
};
usb0: ohci@00500000 {
+ num-ports = <1>;
+ atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
