On Mon, 01 Sep 2014, Andy Shevchenko wrote: > On Mon, 2014-09-01 at 10:13 +0100, Lee Jones wrote: > > On Fri, 22 Aug 2014, Andy Shevchenko wrote: > > > > > This patch refactors the driver to use helper functions instead of > > > copy'n'pasted pieces of code. > > > > > > Tested-by: Chang Rebecca Swee Fun <[email protected]> > > > Signed-off-by: Andy Shevchenko <[email protected]> > > > --- > > > drivers/mfd/lpc_sch.c | 146 > > > ++++++++++++++++++++++---------------------------- > > > 1 file changed, 64 insertions(+), 82 deletions(-) > > > > > > diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c > > > index 4ee7550..0f01ef0 100644 > > > --- a/drivers/mfd/lpc_sch.c > > > +++ b/drivers/mfd/lpc_sch.c > > > @@ -40,41 +40,6 @@ > > > > [...] > > Thanks for review, my answers below. > > > > > > -static int lpc_sch_probe(struct pci_dev *dev, > > > - const struct pci_device_id *id) > > > +static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char > > > *name, > > > + struct resource *res, int size) > > > { > > > unsigned int base_addr_cfg; > > > unsigned short base_addr; > > > - int i, cells = 0; > > > - int ret; > > > > > > - pci_read_config_dword(dev, SMBASE, &base_addr_cfg); > > > + pci_read_config_dword(pdev, where, &base_addr_cfg); > > > base_addr = 0; > > > if (!(base_addr_cfg & (1 << 31))) > > > - dev_warn(&dev->dev, "Decode of the SMBus I/O range disabled\n"); > > > + dev_warn(&pdev->dev, "Decode of the %s I/O range disabled\n", > > > + name); > > > else > > > base_addr = (unsigned short)base_addr_cfg; > > > > > > if (base_addr == 0) { > > > - dev_warn(&dev->dev, "I/O space for SMBus uninitialized\n"); > > > - } else { > > > - lpc_sch_cells[cells++] = isch_smbus_cell; > > > - smbus_sch_resource.start = base_addr; > > > - smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1; > > > + dev_warn(&pdev->dev, "I/O space for %s uninitialized\n", name); > > > + return -ENODEV; > > > > If you're going to return an error, you need to use dev_err() above. > > Okay. > > > > } > > > > > > - pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg); > > > - base_addr = 0; > > > - if (!(base_addr_cfg & (1 << 31))) > > > - dev_warn(&dev->dev, "Decode of the GPIO I/O range disabled\n"); > > > + res->start = base_addr; > > > + res->end = base_addr + size - 1; > > > + res->flags = IORESOURCE_IO; > > > + > > > + return 0; > > > +} > > > + > > > +static int lpc_sch_populate_cell(struct pci_dev *pdev, int where, > > > + const char *name, int size, int id, > > > + struct mfd_cell *cell) > > > +{ > > > + struct resource *res; > > > + int ret; > > > + > > > + res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL); > > > + if (!res) > > > + return -ENOMEM; > > > + > > > + ret = lpc_sch_get_io(pdev, where, name, res, size); > > > + if (ret) > > > + return ret; > > > + > > > + memset(cell, 0, sizeof(*cell)); > > > + > > > + cell->name = name; > > > + cell->resources = res; > > > + cell->num_resources = 1; > > > + cell->ignore_resource_conflicts = true; > > > + cell->id = id; > > > + > > > + return 0; > > > +} > > > + > > > +static int lpc_sch_probe(struct pci_dev *dev, > > > + const struct pci_device_id *id) > > > +{ > > > + struct mfd_cell lpc_sch_cells[3]; > > > + int size, cells = 0; > > > + int ret; > > > + > > > + ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus", SMBUS_IO_SIZE, > > > + id->device, &lpc_sch_cells[cells]); > > > + if (!ret) > > > + cells++; > > > > You're masking errors here. You need to return on error. > > No, I don't. It's a local error, I just need to understand if the HW has > or hasn't the IP part we're looking for.
Yes, you do. -ENOMEM is not a local error, it needs to be returned. > I could, let's say, return true or false, if you prefer, with the above > meaning. I don't see this very often, which makes me wonder if it's the right thing to do at all; however, if you're going to this then please return a local state, instead of a Linux Error Code. #define LCP_SKIP_RESOURCE /* Seems resonable? */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
