On Wed, Sep 03, 2014 at 02:13:55PM -0500, Peter Tyser wrote: > > > Can you give more background on your hardware and firmware setup? > > > > Unfortunately I cannot :( The system isn't "mine" per se. It is (as the > > dumps show) IBM's. > > Can you look at the IBM manual and see info about which chipsets are used, > and > how they are connected? > > > Are there > > > > > physically two ICH bridges, or just one that is showing up two times due > > > to a firmware bug? > > > > I can answer that. There are two physical ICH bridges, and according to > > Intel one should be masked off. We shouldn't run with two. > > Interesting. The "normal" setup I'm familiar with is multiple CPUs wired up > to one IOH, and that IOH would be wired up to the ICH10. There'd only be one > ICH10 in this configuration though. An example is on page 30 of > http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/5520-5500-chipset-ioh-datasheet.pdf > I'm not sure how it'd be possible to wire up 2 > ICH10s to one CPU? > Multiple ICHs connected to multiple CPUs, maybe ?
Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
