Hi,
I have a mp3 player Digital MP3/WMA PLAYER using USB1. With kernel 2.6.9 when plug the device ; the kernel recognize the device dmesg show:
usb 1-1: new full speed USB device using address 3
But loading usb-storage ; it did not see the device dmesg shows:
SCSI subsystem initialized Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered.
What does /proc/bus/usb/devices contain? Do you get any more useful information from dmesg if you turn on USB verbose debugging in the kernel configuration?
Hi, Just test 2.6.11-rc1 and it works now. I tested it cz I saw lots of changes in usb=storage in the log not sure which item is applied. Do you still need the info. with 2.6.11? When working the type of disck is like:
with 2.6.12-rc1
usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Vendor: SigmaTel Model: MSCN Rev: 0100 Type: Direct-Access ANSI SCSI revision: 04 usb-storage: device scan complete SCSI device sda: 501760 512-byte hdwr sectors (257 MB) sda: assuming Write Enabled sda: assuming drive cache: write through SCSI device sda: 501760 512-byte hdwr sectors (257 MB) sda: assuming Write Enabled sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
The Vendor and Type etc.. are the same if using 2.6.8. With 2.6.9, 10, and 11 it did not detect device.
Let me know if you still interested to debug it in 2.6.11 (I think no need :-) )
Thank you
Cheers,
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
