support configuration of AOE_PARTITIONS from Kconfig

Signed-off-by: Ed L. Cashin <[EMAIL PROTECTED]>

diff -uprN a/drivers/block/Kconfig b/drivers/block/Kconfig
--- a/drivers/block/Kconfig     2005-03-07 17:37:58.000000000 -0500
+++ b/drivers/block/Kconfig     2005-03-10 12:19:54.000000000 -0500
@@ -506,4 +506,19 @@ config ATA_OVER_ETH
        This driver provides Support for ATA over Ethernet block
        devices like the Coraid EtherDrive (R) Storage Blade.
 
+config AOE_PARTITIONS
+       int "Partitions per AoE device" if ATA_OVER_ETH
+       default "16"
+       help
+         The default is to support 16 partitions per aoe device. Some
+         systems lack good support for devices with large minor
+         numbers.
+
+         Such systems will be able to use more aoe disks when
+         AOE_PARTITIONS is set to one, but you won't be able to
+         partition the disks, and you must make sure your device
+         nodes are created to work with the value you select.
+
+         If unsure, use 16.
+
 endmenu
diff -uprN a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
--- a/drivers/block/aoe/aoe.h   2005-03-10 12:19:27.000000000 -0500
+++ b/drivers/block/aoe/aoe.h   2005-03-10 12:19:54.000000000 -0500
@@ -6,8 +6,9 @@
 /* set AOE_PARTITIONS to 1 to use whole-disks only
  * default is 16, which is 15 partitions plus the whole disk
  */
-#ifndef AOE_PARTITIONS
-#define AOE_PARTITIONS 16
+#define AOE_PARTITIONS CONFIG_AOE_PARTITIONS
+#if AOE_PARTITIONS < 1
+#error AOE_PARTITIONS less than one
 #endif
 
 #define SYSMINOR(aoemajor, aoeminor) ((aoemajor) * 10 + (aoeminor))


-- 
  Ed L. Cashin <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to